summaryrefslogtreecommitdiff
path: root/usbdrv/usbdrvasm15.inc
diff options
context:
space:
mode:
authorFlorian Jung <flo@windfisch.org>2014-03-20 17:44:06 +0100
committerFlorian Jung <flo@windfisch.org>2014-06-19 23:48:56 +0200
commitef0613fc6a5eef89df1cff5c695e1ccf844359f9 (patch)
tree8b834f83a369c3f538dbe86062bfb81f0922a7e0 /usbdrv/usbdrvasm15.inc
parenta400be8ac4d44f3f35fc362081927bc750b1f551 (diff)
initial experiments
Diffstat (limited to 'usbdrv/usbdrvasm15.inc')
-rw-r--r--usbdrv/usbdrvasm15.inc422
1 files changed, 422 insertions, 0 deletions
diff --git a/usbdrv/usbdrvasm15.inc b/usbdrv/usbdrvasm15.inc
new file mode 100644
index 0000000..33bcf0e
--- /dev/null
+++ b/usbdrv/usbdrvasm15.inc
@@ -0,0 +1,422 @@
+/* Name: usbdrvasm15.inc
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: contributed by V. Bosch
+ * Creation Date: 2007-08-06
+ * Tabsize: 4
+ * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ */
+
+/* Do not link this file! Link usbdrvasm.S instead, which includes the
+ * appropriate implementation!
+ */
+
+/*
+General Description:
+This file is the 15 MHz version of the asssembler part of the USB driver. It
+requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC
+oscillator).
+
+See usbdrv.h for a description of the entire driver.
+
+Since almost all of this code is timing critical, don't change unless you
+really know what you are doing! Many parts require not only a maximum number
+of CPU cycles, but even an exact number of cycles!
+*/
+
+;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
+;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte
+; Numbers in brackets are clocks counted from center of last sync bit
+; when instruction starts
+
+;----------------------------------------------------------------------------
+; order of registers pushed:
+; YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4
+;----------------------------------------------------------------------------
+USB_INTR_VECTOR:
+ push YL ;2 push only what is necessary to sync with edge ASAP
+ in YL, SREG ;1
+ push YL ;2
+;----------------------------------------------------------------------------
+; Synchronize with sync pattern:
+;
+; sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
+; sync up with J to K edge during sync pattern -- use fastest possible loops
+;The first part waits at most 1 bit long since we must be in sync pattern.
+;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
+;waitForJ, ensure that this prerequisite is met.
+waitForJ:
+ inc YL
+ sbis USBIN, USBMINUS
+ brne waitForJ ; just make sure we have ANY timeout
+;-------------------------------------------------------------------------------
+; The following code results in a sampling window of < 1/4 bit
+; which meets the spec.
+;-------------------------------------------------------------------------------
+waitForK: ;-
+ sbis USBIN, USBMINUS ;1 [00] <-- sample
+ rjmp foundK ;2 [01]
+ sbis USBIN, USBMINUS ; <-- sample
+ rjmp foundK
+ sbis USBIN, USBMINUS ; <-- sample
+ rjmp foundK
+ sbis USBIN, USBMINUS ; <-- sample
+ rjmp foundK
+ sbis USBIN, USBMINUS ; <-- sample
+ rjmp foundK
+ sbis USBIN, USBMINUS ; <-- sample
+ rjmp foundK
+#if USB_COUNT_SOF
+ lds YL, usbSofCount
+ inc YL
+ sts usbSofCount, YL
+#endif /* USB_COUNT_SOF */
+#ifdef USB_SOF_HOOK
+ USB_SOF_HOOK
+#endif
+ rjmp sofError
+;------------------------------------------------------------------------------
+; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for
+; center sampling]
+; we have 1 bit time for setup purposes, then sample again.
+; Numbers in brackets are cycles from center of first sync (double K)
+; bit after the instruction
+;------------------------------------------------------------------------------
+foundK: ;- [02]
+ lds YL, usbInputBufOffset;2 [03+04] tx loop
+ push YH ;2 [05+06]
+ clr YH ;1 [07]
+ subi YL, lo8(-(usbRxBuf)) ;1 [08] [rx loop init]
+ sbci YH, hi8(-(usbRxBuf)) ;1 [09] [rx loop init]
+ push shift ;2 [10+11]
+ ser shift ;1 [12]
+ sbis USBIN, USBMINUS ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early)
+ rjmp haveTwoBitsK ;2 [00] [14]
+ pop shift ;2 [15+16] undo the push from before
+ pop YH ;2 [17+18] undo the push from before
+ rjmp waitForK ;2 [19+20] this was not the end of sync, retry
+; The entire loop from waitForK until rjmp waitForK above must not exceed two
+; bit times (= 20 cycles).
+
+;----------------------------------------------------------------------------
+; push more registers and initialize values while we sample the first bits:
+;----------------------------------------------------------------------------
+haveTwoBitsK: ;- [01]
+ push x1 ;2 [02+03]
+ push x2 ;2 [04+05]
+ push x3 ;2 [06+07]
+ push bitcnt ;2 [08+09]
+ in x1, USBIN ;1 [00] [10] <-- sample bit 0
+ bst x1, USBMINUS ;1 [01]
+ bld shift, 0 ;1 [02]
+ push cnt ;2 [03+04]
+ ldi cnt, USB_BUFSIZE ;1 [05]
+ push x4 ;2 [06+07] tx loop
+ rjmp rxLoop ;2 [08]
+;----------------------------------------------------------------------------
+; Receiver loop (numbers in brackets are cycles within byte after instr)
+;----------------------------------------------------------------------------
+unstuff0: ;- [07] (branch taken)
+ andi x3, ~0x01 ;1 [08]
+ mov x1, x2 ;1 [09] x2 contains last sampled (stuffed) bit
+ in x2, USBIN ;1 [00] [10] <-- sample bit 1 again
+ andi x2, USBMASK ;1 [01]
+ breq se0Hop ;1 [02] SE0 check for bit 1
+ ori shift, 0x01 ;1 [03] 0b00000001
+ nop ;1 [04]
+ rjmp didUnstuff0 ;2 [05]
+;-----------------------------------------------------
+unstuff1: ;- [05] (branch taken)
+ mov x2, x1 ;1 [06] x1 contains last sampled (stuffed) bit
+ andi x3, ~0x02 ;1 [07]
+ ori shift, 0x02 ;1 [08] 0b00000010
+ nop ;1 [09]
+ in x1, USBIN ;1 [00] [10] <-- sample bit 2 again
+ andi x1, USBMASK ;1 [01]
+ breq se0Hop ;1 [02] SE0 check for bit 2
+ rjmp didUnstuff1 ;2 [03]
+;-----------------------------------------------------
+unstuff2: ;- [05] (branch taken)
+ andi x3, ~0x04 ;1 [06]
+ ori shift, 0x04 ;1 [07] 0b00000100
+ mov x1, x2 ;1 [08] x2 contains last sampled (stuffed) bit
+ nop ;1 [09]
+ in x2, USBIN ;1 [00] [10] <-- sample bit 3
+ andi x2, USBMASK ;1 [01]
+ breq se0Hop ;1 [02] SE0 check for bit 3
+ rjmp didUnstuff2 ;2 [03]
+;-----------------------------------------------------
+unstuff3: ;- [00] [10] (branch taken)
+ in x2, USBIN ;1 [01] [11] <-- sample stuffed bit 3 one cycle too late
+ andi x2, USBMASK ;1 [02]
+ breq se0Hop ;1 [03] SE0 check for stuffed bit 3
+ andi x3, ~0x08 ;1 [04]
+ ori shift, 0x08 ;1 [05] 0b00001000
+ rjmp didUnstuff3 ;2 [06]
+;----------------------------------------------------------------------------
+; extra jobs done during bit interval:
+;
+; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs],
+; overflow check, jump to the head of rxLoop
+; bit 1: SE0 check
+; bit 2: SE0 check, recovery from delay [bit 0 tasks took too long]
+; bit 3: SE0 check, recovery from delay [bit 0 tasks took too long]
+; bit 4: SE0 check, none
+; bit 5: SE0 check, none
+; bit 6: SE0 check, none
+; bit 7: SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others
+;----------------------------------------------------------------------------
+rxLoop: ;- [09]
+ in x2, USBIN ;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed)
+ andi x2, USBMASK ;1 [01]
+ brne SkipSe0Hop ;1 [02]
+se0Hop: ;- [02]
+ rjmp se0 ;2 [03] SE0 check for bit 1
+SkipSe0Hop: ;- [03]
+ ser x3 ;1 [04]
+ andi shift, 0xf9 ;1 [05] 0b11111001
+ breq unstuff0 ;1 [06]
+didUnstuff0: ;- [06]
+ eor x1, x2 ;1 [07]
+ bst x1, USBMINUS ;1 [08]
+ bld shift, 1 ;1 [09]
+ in x1, USBIN ;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed)
+ andi x1, USBMASK ;1 [01]
+ breq se0Hop ;1 [02] SE0 check for bit 2
+ andi shift, 0xf3 ;1 [03] 0b11110011
+ breq unstuff1 ;1 [04] do remaining work for bit 1
+didUnstuff1: ;- [04]
+ eor x2, x1 ;1 [05]
+ bst x2, USBMINUS ;1 [06]
+ bld shift, 2 ;1 [07]
+ nop2 ;2 [08+09]
+ in x2, USBIN ;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed)
+ andi x2, USBMASK ;1 [01]
+ breq se0Hop ;1 [02] SE0 check for bit 3
+ andi shift, 0xe7 ;1 [03] 0b11100111
+ breq unstuff2 ;1 [04]
+didUnstuff2: ;- [04]
+ eor x1, x2 ;1 [05]
+ bst x1, USBMINUS ;1 [06]
+ bld shift, 3 ;1 [07]
+didUnstuff3: ;- [07]
+ andi shift, 0xcf ;1 [08] 0b11001111
+ breq unstuff3 ;1 [09]
+ in x1, USBIN ;1 [00] [10] <-- sample bit 4
+ andi x1, USBMASK ;1 [01]
+ breq se0Hop ;1 [02] SE0 check for bit 4
+ eor x2, x1 ;1 [03]
+ bst x2, USBMINUS ;1 [04]
+ bld shift, 4 ;1 [05]
+didUnstuff4: ;- [05]
+ andi shift, 0x9f ;1 [06] 0b10011111
+ breq unstuff4 ;1 [07]
+ nop2 ;2 [08+09]
+ in x2, USBIN ;1 [00] [10] <-- sample bit 5
+ andi x2, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for bit 5
+ eor x1, x2 ;1 [03]
+ bst x1, USBMINUS ;1 [04]
+ bld shift, 5 ;1 [05]
+didUnstuff5: ;- [05]
+ andi shift, 0x3f ;1 [06] 0b00111111
+ breq unstuff5 ;1 [07]
+ nop2 ;2 [08+09]
+ in x1, USBIN ;1 [00] [10] <-- sample bit 6
+ andi x1, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for bit 6
+ eor x2, x1 ;1 [03]
+ bst x2, USBMINUS ;1 [04]
+ bld shift, 6 ;1 [05]
+didUnstuff6: ;- [05]
+ cpi shift, 0x02 ;1 [06] 0b00000010
+ brlo unstuff6 ;1 [07]
+ nop2 ;2 [08+09]
+ in x2, USBIN ;1 [00] [10] <-- sample bit 7
+ andi x2, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for bit 7
+ eor x1, x2 ;1 [03]
+ bst x1, USBMINUS ;1 [04]
+ bld shift, 7 ;1 [05]
+didUnstuff7: ;- [05]
+ cpi shift, 0x04 ;1 [06] 0b00000100
+ brlo unstuff7 ;1 [07]
+ eor x3, shift ;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others
+ nop ;1 [09]
+ in x1, USBIN ;1 [00] [10] <-- sample bit 0
+ st y+, x3 ;2 [01+02] store data
+ eor x2, x1 ;1 [03]
+ bst x2, USBMINUS ;1 [04]
+ bld shift, 0 ;1 [05]
+ subi cnt, 1 ;1 [06]
+ brcs overflow ;1 [07]
+ rjmp rxLoop ;2 [08]
+;-----------------------------------------------------
+unstuff4: ;- [08]
+ andi x3, ~0x10 ;1 [09]
+ in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 4
+ andi x1, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for stuffed bit 4
+ ori shift, 0x10 ;1 [03]
+ rjmp didUnstuff4 ;2 [04]
+;-----------------------------------------------------
+unstuff5: ;- [08]
+ ori shift, 0x20 ;1 [09]
+ in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 5
+ andi x2, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for stuffed bit 5
+ andi x3, ~0x20 ;1 [03]
+ rjmp didUnstuff5 ;2 [04]
+;-----------------------------------------------------
+unstuff6: ;- [08]
+ andi x3, ~0x40 ;1 [09]
+ in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 6
+ andi x1, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for stuffed bit 6
+ ori shift, 0x40 ;1 [03]
+ rjmp didUnstuff6 ;2 [04]
+;-----------------------------------------------------
+unstuff7: ;- [08]
+ andi x3, ~0x80 ;1 [09]
+ in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 7
+ andi x2, USBMASK ;1 [01]
+ breq se0 ;1 [02] SE0 check for stuffed bit 7
+ ori shift, 0x80 ;1 [03]
+ rjmp didUnstuff7 ;2 [04]
+
+macro POP_STANDARD ; 16 cycles
+ pop x4
+ pop cnt
+ pop bitcnt
+ pop x3
+ pop x2
+ pop x1
+ pop shift
+ pop YH
+ endm
+macro POP_RETI ; 5 cycles
+ pop YL
+ out SREG, YL
+ pop YL
+ endm
+
+#include "asmcommon.inc"
+
+;---------------------------------------------------------------------------
+; USB spec says:
+; idle = J
+; J = (D+ = 0), (D- = 1)
+; K = (D+ = 1), (D- = 0)
+; Spec allows 7.5 bit times from EOP to SOP for replies
+;---------------------------------------------------------------------------
+bitstuffN: ;- [04]
+ eor x1, x4 ;1 [05]
+ clr x2 ;1 [06]
+ nop ;1 [07]
+ rjmp didStuffN ;1 [08]
+;---------------------------------------------------------------------------
+bitstuff6: ;- [04]
+ eor x1, x4 ;1 [05]
+ clr x2 ;1 [06]
+ rjmp didStuff6 ;1 [07]
+;---------------------------------------------------------------------------
+bitstuff7: ;- [02]
+ eor x1, x4 ;1 [03]
+ clr x2 ;1 [06]
+ nop ;1 [05]
+ rjmp didStuff7 ;1 [06]
+;---------------------------------------------------------------------------
+sendNakAndReti: ;- [-19]
+ ldi x3, USBPID_NAK ;1 [-18]
+ rjmp sendX3AndReti ;1 [-17]
+;---------------------------------------------------------------------------
+sendAckAndReti: ;- [-17]
+ ldi cnt, USBPID_ACK ;1 [-16]
+sendCntAndReti: ;- [-16]
+ mov x3, cnt ;1 [-15]
+sendX3AndReti: ;- [-15]
+ ldi YL, 20 ;1 [-14] x3==r20 address is 20
+ ldi YH, 0 ;1 [-13]
+ ldi cnt, 2 ;1 [-12]
+; rjmp usbSendAndReti fallthrough
+;---------------------------------------------------------------------------
+;usbSend:
+;pointer to data in 'Y'
+;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
+;uses: x1...x4, btcnt, shift, cnt, Y
+;Numbers in brackets are time since first bit of sync pattern is sent
+;We need not to match the transfer rate exactly because the spec demands
+;only 1.5% precision anyway.
+usbSendAndReti: ;- [-13] 13 cycles until SOP
+ in x2, USBDDR ;1 [-12]
+ ori x2, USBMASK ;1 [-11]
+ sbi USBOUT, USBMINUS ;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups)
+ in x1, USBOUT ;1 [-08] port mirror for tx loop
+ out USBDDR, x2 ;1 [-07] <- acquire bus
+ ; need not init x2 (bitstuff history) because sync starts with 0
+ ldi x4, USBMASK ;1 [-06] exor mask
+ ldi shift, 0x80 ;1 [-05] sync byte is first byte sent
+ ldi bitcnt, 6 ;1 [-04]
+txBitLoop: ;- [-04] [06]
+ sbrs shift, 0 ;1 [-03] [07]
+ eor x1, x4 ;1 [-02] [08]
+ ror shift ;1 [-01] [09]
+didStuffN: ;- [09]
+ out USBOUT, x1 ;1 [00] [10] <-- out N
+ ror x2 ;1 [01]
+ cpi x2, 0xfc ;1 [02]
+ brcc bitstuffN ;1 [03]
+ dec bitcnt ;1 [04]
+ brne txBitLoop ;1 [05]
+ sbrs shift, 0 ;1 [06]
+ eor x1, x4 ;1 [07]
+ ror shift ;1 [08]
+didStuff6: ;- [08]
+ nop ;1 [09]
+ out USBOUT, x1 ;1 [00] [10] <-- out 6
+ ror x2 ;1 [01]
+ cpi x2, 0xfc ;1 [02]
+ brcc bitstuff6 ;1 [03]
+ sbrs shift, 0 ;1 [04]
+ eor x1, x4 ;1 [05]
+ ror shift ;1 [06]
+ ror x2 ;1 [07]
+didStuff7: ;- [07]
+ ldi bitcnt, 6 ;1 [08]
+ cpi x2, 0xfc ;1 [09]
+ out USBOUT, x1 ;1 [00] [10] <-- out 7
+ brcc bitstuff7 ;1 [01]
+ ld shift, y+ ;2 [02+03]
+ dec cnt ;1 [04]
+ brne txBitLoop ;1 [05]
+makeSE0:
+ cbr x1, USBMASK ;1 [06] prepare SE0 [spec says EOP may be 19 to 23 cycles]
+ lds x2, usbNewDeviceAddr;2 [07+08]
+ lsl x2 ;1 [09] we compare with left shifted address
+;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
+;set address only after data packet was sent, not after handshake
+ out USBOUT, x1 ;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle
+ subi YL, 20 + 2 ;1 [01] Only assign address on data packets, not ACK/NAK in x3
+ sbci YH, 0 ;1 [02]
+ breq skipAddrAssign ;1 [03]
+ sts usbDeviceAddr, x2 ;2 [04+05] if not skipped: SE0 is one cycle longer
+;----------------------------------------------------------------------------
+;end of usbDeviceAddress transfer
+skipAddrAssign: ;- [03/04]
+ ldi x2, 1<<USB_INTR_PENDING_BIT ;1 [05] int0 occurred during TX -- clear pending flag
+ USB_STORE_PENDING(x2) ;1 [06]
+ ori x1, USBIDLE ;1 [07]
+ in x2, USBDDR ;1 [08]
+ cbr x2, USBMASK ;1 [09] set both pins to input
+ mov x3, x1 ;1 [10]
+ cbr x3, USBMASK ;1 [11] configure no pullup on both pins
+ ldi x4, 3 ;1 [12]
+se0Delay: ;- [12] [15]
+ dec x4 ;1 [13] [16]
+ brne se0Delay ;1 [14] [17]
+ nop2 ;2 [18+19]
+ out USBOUT, x1 ;1 [20] <--out J (idle) -- end of SE0 (EOP sig.)
+ out USBDDR, x2 ;1 [21] <--release bus now
+ out USBOUT, x3 ;1 [22] <--ensure no pull-up resistors are active
+ rjmp doReturn ;1 [23]
+;---------------------------------------------------------------------------