summaryrefslogtreecommitdiff
path: root/usbdrv/usbconfig.h
diff options
context:
space:
mode:
Diffstat (limited to 'usbdrv/usbconfig.h')
-rw-r--r--usbdrv/usbconfig.h16
1 files changed, 8 insertions, 8 deletions
diff --git a/usbdrv/usbconfig.h b/usbdrv/usbconfig.h
index 48d4a93..e4b61ff 100644
--- a/usbdrv/usbconfig.h
+++ b/usbdrv/usbconfig.h
@@ -74,7 +74,7 @@ section at the end of this file).
/* --------------------------- Functional Range ---------------------------- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT 0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
/* Define this to 1 if you want to compile a version with two endpoints: The
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
* number).
@@ -109,7 +109,7 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM.
*/
-#define USB_CFG_INTR_POLL_INTERVAL 10
+#define USB_CFG_INTR_POLL_INTERVAL 100
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
@@ -123,7 +123,7 @@ section at the end of this file).
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
-#define USB_CFG_IMPLEMENT_FN_WRITE 1
+#define USB_CFG_IMPLEMENT_FN_WRITE 0
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of
* bytes.
@@ -227,7 +227,7 @@ section at the end of this file).
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
-#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
+#define USB_CFG_DEVICE_ID 0xe8, 0x03 /* = 0x05dc = 1500 */
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise
@@ -251,8 +251,8 @@ section at the end of this file).
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
-#define USB_CFG_DEVICE_NAME 'F','l','o',' ','T','e','s','t'
-#define USB_CFG_DEVICE_NAME_LEN 8
+#define USB_CFG_DEVICE_NAME 'F','l','o',' ','H','i','d'
+#define USB_CFG_DEVICE_NAME_LEN 7
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
* you use a shared VID/PID.
@@ -266,12 +266,12 @@ section at the end of this file).
* to fine tune control over USB descriptors such as the string descriptor
* for the serial number.
*/
-#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */
+#define USB_CFG_DEVICE_CLASS 0 /* set to 0 if deferred to interface */
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
* Class 0xff is "vendor specific".
*/
-#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */
+#define USB_CFG_INTERFACE_CLASS 3 /* define class here if not at device level */
#define USB_CFG_INTERFACE_SUBCLASS 0
#define USB_CFG_INTERFACE_PROTOCOL 0
/* See USB specification if you want to conform to an existing device class or