added usbdrv (stock)

1 files changed, 345 insertions, 0 deletions

diff --git a/usbdrv/usbdrvasm16.inc b/usbdrv/usbdrvasm16.inc
new file mode 100644
index 0000000..25b84e6
--- /dev/null
+++ b/usbdrv/usbdrvasm16.inc
@@ -0,0 +1,345 @@
+/* Name: usbdrvasm16.inc
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2007-06-15
+ * Tabsize: 4
+ * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ */
+
+/* Do not link this file! Link usbdrvasm.S instead, which includes the
+ * appropriate implementation!
+ */
+
+/*
+General Description:
+This file is the 16 MHz version of the asssembler part of the USB driver. It
+requires a 16 MHz crystal (not a ceramic resonator and not a calibrated RC
+oscillator).
+
+See usbdrv.h for a description of the entire driver.
+
+Since almost all of this code is timing critical, don't change unless you
+really know what you are doing! Many parts require not only a maximum number
+of CPU cycles, but even an exact number of cycles!
+*/
+
+;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
+;nominal frequency: 16 MHz -> 10.6666666 cycles per bit, 85.333333333 cycles per byte
+; Numbers in brackets are clocks counted from center of last sync bit
+; when instruction starts
+
+USB_INTR_VECTOR:
+;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt
+    push    YL                  ;[-25] push only what is necessary to sync with edge ASAP
+    in      YL, SREG            ;[-23]
+    push    YL                  ;[-22]
+    push    YH                  ;[-20]
+;----------------------------------------------------------------------------
+; Synchronize with sync pattern:
+;----------------------------------------------------------------------------
+;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
+;sync up with J to K edge during sync pattern -- use fastest possible loops
+;The first part waits at most 1 bit long since we must be in sync pattern.
+;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
+;waitForJ, ensure that this prerequisite is met.
+waitForJ:
+    inc     YL
+    sbis    USBIN, USBMINUS
+    brne    waitForJ        ; just make sure we have ANY timeout
+waitForK:
+;The following code results in a sampling window of < 1/4 bit which meets the spec.
+    sbis    USBIN, USBMINUS     ;[-15]
+    rjmp    foundK              ;[-14]
+    sbis    USBIN, USBMINUS
+    rjmp    foundK
+    sbis    USBIN, USBMINUS
+    rjmp    foundK
+    sbis    USBIN, USBMINUS
+    rjmp    foundK
+    sbis    USBIN, USBMINUS
+    rjmp    foundK
+    sbis    USBIN, USBMINUS
+    rjmp    foundK
+#if USB_COUNT_SOF
+    lds     YL, usbSofCount
+    inc     YL
+    sts     usbSofCount, YL
+#endif  /* USB_COUNT_SOF */
+#ifdef USB_SOF_HOOK
+    USB_SOF_HOOK
+#endif
+    rjmp    sofError
+foundK:                         ;[-12]
+;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling]
+;we have 1 bit time for setup purposes, then sample again. Numbers in brackets
+;are cycles from center of first sync (double K) bit after the instruction
+    push    bitcnt              ;[-12]
+;   [---]                       ;[-11]
+    lds     YL, usbInputBufOffset;[-10]
+;   [---]                       ;[-9]
+    clr     YH                  ;[-8]
+    subi    YL, lo8(-(usbRxBuf));[-7] [rx loop init]
+    sbci    YH, hi8(-(usbRxBuf));[-6] [rx loop init]
+    push    shift               ;[-5]
+;   [---]                       ;[-4]
+    ldi     bitcnt, 0x55        ;[-3] [rx loop init]
+    sbis    USBIN, USBMINUS     ;[-2] we want two bits K (sample 2 cycles too early)
+    rjmp    haveTwoBitsK        ;[-1]
+    pop     shift               ;[0] undo the push from before
+    pop     bitcnt              ;[2] undo the push from before
+    rjmp    waitForK            ;[4] this was not the end of sync, retry
+; The entire loop from waitForK until rjmp waitForK above must not exceed two
+; bit times (= 21 cycles).
+
+;----------------------------------------------------------------------------
+; push more registers and initialize values while we sample the first bits:
+;----------------------------------------------------------------------------
+haveTwoBitsK:
+    push    x1              ;[1]
+    push    x2              ;[3]
+    push    x3              ;[5]
+    ldi     shift, 0        ;[7]
+    ldi     x3, 1<<4        ;[8] [rx loop init] first sample is inverse bit, compensate that
+    push    x4              ;[9] == leap
+
+    in      x1, USBIN       ;[11] <-- sample bit 0
+    andi    x1, USBMASK     ;[12]
+    bst     x1, USBMINUS    ;[13]
+    bld     shift, 7        ;[14]
+    push    cnt             ;[15]
+    ldi     leap, 0         ;[17] [rx loop init]
+    ldi     cnt, USB_BUFSIZE;[18] [rx loop init]
+    rjmp    rxbit1          ;[19] arrives at [21]
+
+;----------------------------------------------------------------------------
+; Receiver loop (numbers in brackets are cycles within byte after instr)
+;----------------------------------------------------------------------------
+
+; duration of unstuffing code should be 10.66666667 cycles. We adjust "leap"
+; accordingly to approximate this value in the long run.
+
+unstuff6:
+    andi    x2, USBMASK ;[03]
+    ori     x3, 1<<6    ;[04] will not be shifted any more
+    andi    shift, ~0x80;[05]
+    mov     x1, x2      ;[06] sampled bit 7 is actually re-sampled bit 6
+    subi    leap, -1    ;[07] total duration = 11 bits -> subtract 1/3
+    rjmp    didUnstuff6 ;[08]
+
+unstuff7:
+    ori     x3, 1<<7    ;[09] will not be shifted any more
+    in      x2, USBIN   ;[00] [10]  re-sample bit 7
+    andi    x2, USBMASK ;[01]
+    andi    shift, ~0x80;[02]
+    subi    leap, 2     ;[03] total duration = 10 bits -> add 1/3
+    rjmp    didUnstuff7 ;[04]
+
+unstuffEven:
+    ori     x3, 1<<6    ;[09] will be shifted right 6 times for bit 0
+    in      x1, USBIN   ;[00] [10]
+    andi    shift, ~0x80;[01]
+    andi    x1, USBMASK ;[02]
+    breq    se0         ;[03]
+    subi    leap, -1    ;[04] total duration = 11 bits -> subtract 1/3
+    nop2                ;[05]
+    rjmp    didUnstuffE ;[06]
+
+unstuffOdd:
+    ori     x3, 1<<5    ;[09] will be shifted right 4 times for bit 1
+    in      x2, USBIN   ;[00] [10]
+    andi    shift, ~0x80;[01]
+    andi    x2, USBMASK ;[02]
+    breq    se0         ;[03]
+    subi    leap, -1    ;[04] total duration = 11 bits -> subtract 1/3
+    nop2                ;[05]
+    rjmp    didUnstuffO ;[06]
+
+rxByteLoop:
+    andi    x1, USBMASK ;[03]
+    eor     x2, x1      ;[04]
+    subi    leap, 1     ;[05]
+    brpl    skipLeap    ;[06]
+    subi    leap, -3    ;1 one leap cycle every 3rd byte -> 85 + 1/3 cycles per byte
+    nop                 ;1
+skipLeap:
+    subi    x2, 1       ;[08]
+    ror     shift       ;[09]
+didUnstuff6:
+    cpi     shift, 0xfc ;[10]
+    in      x2, USBIN   ;[00] [11] <-- sample bit 7
+    brcc    unstuff6    ;[01]
+    andi    x2, USBMASK ;[02]
+    eor     x1, x2      ;[03]
+    subi    x1, 1       ;[04]
+    ror     shift       ;[05]
+didUnstuff7:
+    cpi     shift, 0xfc ;[06]
+    brcc    unstuff7    ;[07]
+    eor     x3, shift   ;[08] reconstruct: x3 is 1 at bit locations we changed, 0 at others
+    st      y+, x3      ;[09] store data
+rxBitLoop:
+    in      x1, USBIN   ;[00] [11] <-- sample bit 0/2/4
+    andi    x1, USBMASK ;[01]
+    eor     x2, x1      ;[02]
+    andi    x3, 0x3f    ;[03] topmost two bits reserved for 6 and 7
+    subi    x2, 1       ;[04]
+    ror     shift       ;[05]
+    cpi     shift, 0xfc ;[06]
+    brcc    unstuffEven ;[07]
+didUnstuffE:
+    lsr     x3          ;[08]
+    lsr     x3          ;[09]
+rxbit1:
+    in      x2, USBIN   ;[00] [10] <-- sample bit 1/3/5
+    andi    x2, USBMASK ;[01]
+    breq    se0         ;[02]
+    eor     x1, x2      ;[03]
+    subi    x1, 1       ;[04]
+    ror     shift       ;[05]
+    cpi     shift, 0xfc ;[06]
+    brcc    unstuffOdd  ;[07]
+didUnstuffO:
+    subi    bitcnt, 0xab;[08] == addi 0x55, 0x55 = 0x100/3
+    brcs    rxBitLoop   ;[09]
+
+    subi    cnt, 1      ;[10]
+    in      x1, USBIN   ;[00] [11] <-- sample bit 6
+    brcc    rxByteLoop  ;[01]
+    rjmp    overflow
+
+macro POP_STANDARD ; 14 cycles
+    pop     cnt
+    pop     x4
+    pop     x3
+    pop     x2
+    pop     x1
+    pop     shift
+    pop     bitcnt
+    endm
+macro POP_RETI     ; 7 cycles
+    pop     YH
+    pop     YL
+    out     SREG, YL
+    pop     YL
+    endm
+
+#include "asmcommon.inc"
+
+; USB spec says:
+; idle = J
+; J = (D+ = 0), (D- = 1)
+; K = (D+ = 1), (D- = 0)
+; Spec allows 7.5 bit times from EOP to SOP for replies
+
+bitstuffN:
+    eor     x1, x4          ;[5]
+    ldi     x2, 0           ;[6]
+    nop2                    ;[7]
+    nop                     ;[9]
+    out     USBOUT, x1      ;[10] <-- out
+    rjmp    didStuffN       ;[0]
+    
+bitstuff6:
+    eor     x1, x4          ;[5]
+    ldi     x2, 0           ;[6] Carry is zero due to brcc
+    rol     shift           ;[7] compensate for ror shift at branch destination
+    rjmp    didStuff6       ;[8]
+
+bitstuff7:
+    ldi     x2, 0           ;[2] Carry is zero due to brcc
+    rjmp    didStuff7       ;[3]
+
+
+sendNakAndReti:
+    ldi     x3, USBPID_NAK  ;[-18]
+    rjmp    sendX3AndReti   ;[-17]
+sendAckAndReti:
+    ldi     cnt, USBPID_ACK ;[-17]
+sendCntAndReti:
+    mov     x3, cnt         ;[-16]
+sendX3AndReti:
+    ldi     YL, 20          ;[-15] x3==r20 address is 20
+    ldi     YH, 0           ;[-14]
+    ldi     cnt, 2          ;[-13]
+;   rjmp    usbSendAndReti      fallthrough
+
+;usbSend:
+;pointer to data in 'Y'
+;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
+;uses: x1...x4, btcnt, shift, cnt, Y
+;Numbers in brackets are time since first bit of sync pattern is sent
+;We don't match the transfer rate exactly (don't insert leap cycles every third
+;byte) because the spec demands only 1.5% precision anyway.
+usbSendAndReti:             ; 12 cycles until SOP
+    in      x2, USBDDR      ;[-12]
+    ori     x2, USBMASK     ;[-11]
+    sbi     USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups)
+    in      x1, USBOUT      ;[-8] port mirror for tx loop
+    out     USBDDR, x2      ;[-7] <- acquire bus
+; need not init x2 (bitstuff history) because sync starts with 0
+    ldi     x4, USBMASK     ;[-6] exor mask
+    ldi     shift, 0x80     ;[-5] sync byte is first byte sent
+txByteLoop:
+    ldi     bitcnt, 0x35    ;[-4] [6] binary 0011 0101
+txBitLoop:
+    sbrs    shift, 0        ;[-3] [7]
+    eor     x1, x4          ;[-2] [8]
+    out     USBOUT, x1      ;[-1] [9] <-- out N
+    ror     shift           ;[0] [10]
+    ror     x2              ;[1]
+didStuffN:
+    cpi     x2, 0xfc        ;[2]
+    brcc    bitstuffN       ;[3]
+    lsr     bitcnt          ;[4]
+    brcc    txBitLoop       ;[5]
+    brne    txBitLoop       ;[6]
+
+    sbrs    shift, 0        ;[7]
+    eor     x1, x4          ;[8]
+didStuff6:
+    out     USBOUT, x1      ;[-1] [9] <-- out 6
+    ror     shift           ;[0] [10]
+    ror     x2              ;[1]
+    cpi     x2, 0xfc        ;[2]
+    brcc    bitstuff6       ;[3]
+    ror     shift           ;[4]
+didStuff7:
+    ror     x2              ;[5]
+    sbrs    x2, 7           ;[6]
+    eor     x1, x4          ;[7]
+    nop                     ;[8]
+    cpi     x2, 0xfc        ;[9]
+    out     USBOUT, x1      ;[-1][10] <-- out 7
+    brcc    bitstuff7       ;[0] [11]
+    ld      shift, y+       ;[1]
+    dec     cnt             ;[3]
+    brne    txByteLoop      ;[4]
+;make SE0:
+    cbr     x1, USBMASK     ;[5] prepare SE0 [spec says EOP may be 21 to 25 cycles]
+    lds     x2, usbNewDeviceAddr;[6]
+    lsl     x2              ;[8] we compare with left shifted address
+    subi    YL, 20 + 2      ;[9] Only assign address on data packets, not ACK/NAK in x3
+    sbci    YH, 0           ;[10]
+    out     USBOUT, x1      ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle
+;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
+;set address only after data packet was sent, not after handshake
+    breq    skipAddrAssign  ;[0]
+    sts     usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer
+skipAddrAssign:
+;end of usbDeviceAddress transfer
+    ldi     x2, 1<<USB_INTR_PENDING_BIT;[2] int0 occurred during TX -- clear pending flag
+    USB_STORE_PENDING(x2)   ;[3]
+    ori     x1, USBIDLE     ;[4]
+    in      x2, USBDDR      ;[5]
+    cbr     x2, USBMASK     ;[6] set both pins to input
+    mov     x3, x1          ;[7]
+    cbr     x3, USBMASK     ;[8] configure no pullup on both pins
+    ldi     x4, 4           ;[9]
+se0Delay:
+    dec     x4              ;[10] [13] [16] [19]
+    brne    se0Delay        ;[11] [14] [17] [20]
+    out     USBOUT, x1      ;[21] <-- out J (idle) -- end of SE0 (EOP signal)
+    out     USBDDR, x2      ;[22] <-- release bus now
+    out     USBOUT, x3      ;[23] <-- ensure no pull-up resistors are active
+    rjmp    doReturn