summaryrefslogtreecommitdiff
path: root/muse2/share/scoreglyphs/feta-original/README
diff options
context:
space:
mode:
authorFlorian Jung <flo@windfisch.org>2011-04-27 20:33:15 +0000
committerFlorian Jung <flo@windfisch.org>2011-04-27 20:33:15 +0000
commite2cec3f03fdee64da1c5080498476c1cdd43bbdb (patch)
tree2b373e4fafd3b015bc5c50fca77d67b3e5677e94 /muse2/share/scoreglyphs/feta-original/README
parentd8ac618f4dc9afd0731a9a3531d4641c9e7ea6fd (diff)
parent0f7a7ab47a2a7742fba2ea6af980ee5d950b8c37 (diff)
merged scoreedit branch into trunk
Diffstat (limited to 'muse2/share/scoreglyphs/feta-original/README')
-rw-r--r--muse2/share/scoreglyphs/feta-original/README125
1 files changed, 125 insertions, 0 deletions
diff --git a/muse2/share/scoreglyphs/feta-original/README b/muse2/share/scoreglyphs/feta-original/README
new file mode 100644
index 00000000..9d52194b
--- /dev/null
+++ b/muse2/share/scoreglyphs/feta-original/README
@@ -0,0 +1,125 @@
+
+This is a font of music symbols. All MF sources are original. Most of the
+documentation is in comments in the MF code.
+
+Non-square pixels are not supported; with other words, the horizontal and
+vertical resolution of the output device must be the same.
+
+Currently, outline fonts are created by using `autotrace', but we are
+already in the process of converting the MF code directly to PostScript code
+with a tool called `mf2pt1', which in turn calls `FontForge' to postprocess
+the output (mainly to remove outline overlaps and to add hints).
+
+The recommended calling sequence of mf2pt1 is
+
+ mf2pt1 --rounding=0.0001 <other options> <font>
+
+You need mf2pt1 version 2.1 or newer.
+
+
+Here some guidelines to assure a clean conversion.
+
+. Never use `---'. Replace it with `--' together with explicit path
+ directions (if necessary).
+
+. Don't use self-intersecting outlines in general since they can confuse
+ mf2pt1's algorithm to get the orientation of a closed path. Note that
+ MetaPost's implementation of the `turningnumber' primitive (which would
+ immediately give the orientation of a path) is severely broken before
+ version 1.0 of MetaPost, thus some hand-made code in mf2pt1.mp is used
+ to work around this bug.
+
+. If outlines intersect, avoid grazing intersections. In case two outlines
+ intersect in an explicitly defined point, include this point in both
+ intersecting paths to avoid problems due to rounding errors.
+
+. Don't use `draw' with a polygonal pen but for straight lines (consisting
+ of exactly two points). In most cases it is quite easy to emulate `draw'
+ with an explicit definition of the outline or with `penstroke'.
+
+. Don't apply transformations after calling `fill' -- for example, don't
+ mirror `currentpicture'. Instead, transform the path and call `fill'
+ afterwards. This ensures that mf2pt1 gets the correct outline directions
+ which is a necessary prerequisite for FontForge's algorithm to remove
+ overlaps.
+
+
+Some glyph name rules:
+
+. Most glyph names have the form <group>.<name>, where <group> is defined
+ with the `fet_begingroup' command, and <name> is given with
+ `fet_beginchar' (within a `fet_begingroup' block). Example:
+ `clefs.vaticana.fa'.
+
+. Sometimes it would be sensible to use negative numbers in glyph names.
+ However, the `-' character shouldn't be used in a glyph name. Replace it
+ with `M'. For example, write `rests.M3mensural' instead of
+ `rests.-3mensural'.
+
+. Glyphs which exist in both an `up' and `down' version should start the
+ <name> part with either `u' or `d', respectively. Example: `flags.d3',
+ `flags.u3'. Glyphs which are neutral w.r.t. the direction, and where
+ members of the glyph group exist which have `up' and `down' versions,
+ should start with an `s'. Example: `noteheads.s0re'.
+
+
+Some design rules:
+
+. Always use smooth curve transitions. Since this is difficult to see in
+ MetaFont proof sheets (which don't show the tangents) I recommend to call
+ mf2pt1 like this
+
+ FONTFORGE=foo mf2pt1 ...
+
+ (`foo' should be a non-existent program; this avoids the default
+ postprocessing). Then call FontForge to inspect the outlines.
+
+. Use rounded corners.
+
+
+Hints for stem attachment:
+
+. Stem attachment of glyphs is controlled by two special variables called
+ `charwx' and `charwy'. Stems can be regarded as (very oblonged)
+ rectangles with slightly rounded corners. For stems pointing upwards the
+ lower right corner of this rectangle is attached to the glyph at position
+ (charwx, charwy). For stems pointing downwards it works analogously but
+ with the upper left corner, where the position of the attachment point is
+ additionally reflected horizontally about the center of the glyph -- this
+ ensures that in most cases charwx and charwy can be set to the same values
+ for up and down stems even though these are attached at the right/left end
+ of the note, respectively. To make this more precise, the upper left
+ corner of a down stem is attached at position (charwd/2 - charwx, charwy),
+ where `charwd' is an internal metafont variable representing the glyph
+ width as specified by the `set_char_box' command.
+
+. In case different stem attachments for upward and downward pointing stems
+ are needed, two separate glyphs must be defined in the Metafont file; of
+ course, this also applies if two entirely different shapes are needed.
+ These have the same name but are prefixed by `u' and `d', respectively
+ (for `up' and `down', obviously). In each of these glyphs the variables
+ charwx and charwy must be set accordingly. If, on the other hand, the
+ attachment point is the `same' for both directions (with the
+ abovementioned horizontal reflection taken into account), then the prefix
+ `s' (for `symmetric') should be used. See the existing files for
+ examples. The numbers in the glyph names refer to the duration of the
+ note; e.g., `s0cross' in feta-bolletjes.mf defines the notehead for a
+ whole cross-shaped note (similarly, `s1cross' and `s2cross' are for half
+ and quarter notes, respectively).
+
+
+Finally, some rules to assure that rasterization at low resolutions gives
+good results. Today, this is a minor issue, but in some cases it might show
+design flaws.
+
+. Use `define_whole_pixels' and friends where appropriate.
+
+. Use `hround' and `vround' consistently. A lot of auxiliary macros are
+ defined in feta-macros.mf.
+
+. If a path element is duplicated or shifted, use an integer value for the
+ offset.
+
+. Add `eps' for mirrored paths to assure correct MetaFont rasterization.
+ See the comment and the variables at the end of `feta-params.mf' for
+ details how vertical symmetry should be achieved.