removed ladspa.h, use system header file instead

thanks, andy.

3 files changed, 2 insertions, 601 deletions

diff --git a/muse2/muse/dssihost.h b/muse2/muse/dssihost.h
index 46c9a07b..93038011 100644
--- a/muse2/muse/dssihost.h
+++ b/muse2/muse/dssihost.h
@@ -46,7 +46,7 @@
 #include "osc.h"
 #endif
 
-#include "ladspa.h"
+#include <ladspa.h>
 #include <dssi.h>
 
 #include <alsa/asoundlib.h>
diff --git a/muse2/muse/ladspa.h b/muse2/muse/ladspa.h
deleted file mode 100644
index d7e0e902..00000000
--- a/muse2/muse/ladspa.h
+++ /dev/null
@@ -1,599 +0,0 @@
-/* ladspa.h
-
-   Linux Audio Developer's Simple Plugin API Version 1.1[provisional,
-   LGPL].  Copyright (C) 2000-2002 Richard W.E. Furse, Paul
-   Barton-Davis, Stefan Westerfeld.
-
-   This library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public License
-   as published by the Free Software Foundation; either version 2.1 of
-   the License, or (at your option) any later version.
-
-   This library is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with this library; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
-   USA. */
-
-#ifndef LADSPA_INCLUDED
-#define LADSPA_INCLUDED
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*****************************************************************************/
-
-/* Overview:
-
-   There is a large number of synthesis packages in use or development
-   on the Linux platform at this time. This API (`The Linux Audio
-   Developer's Simple Plugin API') attempts to give programmers the
-   ability to write simple `plugin' audio processors in C/C++ and link
-   them dynamically (`plug') into a range of these packages (`hosts').
-   It should be possible for any host and any plugin to communicate
-   completely through this interface.
-
-   This API is deliberately short and simple. To achieve compatibility
-   with a range of promising Linux sound synthesis packages it
-   attempts to find the `greatest common divisor' in their logical
-   behaviour. Having said this, certain limiting decisions are
-   implicit, notably the use of a fixed type (LADSPA_Data) for all
-   data transfer and absence of a parameterised `initialisation'
-   phase. See below for the LADSPA_Data typedef.
-
-   Plugins are expected to distinguish between control and audio
-   data. Plugins have `ports' that are inputs or outputs for audio or
-   control data and each plugin is `run' for a `block' corresponding
-   to a short time interval measured in samples. Audio data is
-   communicated using arrays of LADSPA_Data, allowing a block of audio
-   to be processed by the plugin in a single pass. Control data is
-   communicated using single LADSPA_Data values. Control data has a
-   single value at the start of a call to the `run()' or `run_adding()'
-   function, and may be considered to remain this value for its
-   duration. The plugin may assume that all its input and output ports
-   have been connected to the relevant data location (see the
-   `connect_port()' function below) before it is asked to run.
-
-   Plugins will reside in shared object files suitable for dynamic
-   linking by dlopen() and family. The file will provide a number of
-   `plugin types' that can be used to instantiate actual plugins
-   (sometimes known as `plugin instances') that can be connected
-   together to perform tasks.
-
-   This API contains very limited error-handling. */
-
-/*****************************************************************************/
-
-/* Fundamental data type passed in and out of plugin. This data type
-   is used to communicate audio samples and control values. It is
-   assumed that the plugin will work sensibly given any numeric input
-   value although it may have a preferred range (see hints below).
-
-   For audio it is generally assumed that 1.0f is the `0dB' reference
-   amplitude and is a `normal' signal level. */
-
-typedef float LADSPA_Data;
-
-/*****************************************************************************/
-
-/* Special Plugin Properties:
-
-   Optional features of the plugin type are encapsulated in the
-   LADSPA_Properties type. This is assembled by ORing individual
-   properties together. */
-
-typedef int LADSPA_Properties;
-
-/* Property LADSPA_PROPERTY_REALTIME indicates that the plugin has a
-   real-time dependency (e.g. listens to a MIDI device) and so its
-   output must not be cached or subject to significant latency. */
-#define LADSPA_PROPERTY_REALTIME        0x1
-
-/* Property LADSPA_PROPERTY_INPLACE_BROKEN indicates that the plugin
-   may cease to work correctly if the host elects to use the same data
-   location for both input and output (see connect_port()). This
-   should be avoided as enabling this flag makes it impossible for
-   hosts to use the plugin to process audio `in-place.' */
-#define LADSPA_PROPERTY_INPLACE_BROKEN  0x2
-
-/* Property LADSPA_PROPERTY_HARD_RT_CAPABLE indicates that the plugin
-   is capable of running not only in a conventional host but also in a
-   `hard real-time' environment. To qualify for this the plugin must
-   satisfy all of the following:
-
-   (1) The plugin must not use malloc(), free() or other heap memory
-   management within its run() or run_adding() functions. All new
-   memory used in run() must be managed via the stack. These
-   restrictions only apply to the run() function.
-
-   (2) The plugin will not attempt to make use of any library
-   functions with the exceptions of functions in the ANSI standard C
-   and C maths libraries, which the host is expected to provide.
-
-   (3) The plugin will not access files, devices, pipes, sockets, IPC
-   or any other mechanism that might result in process or thread
-   blocking.
-
-   (4) The plugin will take an amount of time to execute a run() or
-   run_adding() call approximately of form (A+B*SampleCount) where A
-   and B depend on the machine and host in use. This amount of time
-   may not depend on input signals or plugin state. The host is left
-   the responsibility to perform timings to estimate upper bounds for
-   A and B. */
-#define LADSPA_PROPERTY_HARD_RT_CAPABLE 0x4
-
-#define LADSPA_IS_REALTIME(x)        ((x) & LADSPA_PROPERTY_REALTIME)
-#define LADSPA_IS_INPLACE_BROKEN(x)  ((x) & LADSPA_PROPERTY_INPLACE_BROKEN)
-#define LADSPA_IS_HARD_RT_CAPABLE(x) ((x) & LADSPA_PROPERTY_HARD_RT_CAPABLE)
-
-/*****************************************************************************/
-
-/* Plugin Ports:
-
-   Plugins have `ports' that are inputs or outputs for audio or
-   data. Ports can communicate arrays of LADSPA_Data (for audio
-   inputs/outputs) or single LADSPA_Data values (for control
-   input/outputs). This information is encapsulated in the
-   LADSPA_PortDescriptor type which is assembled by ORing individual
-   properties together.
-
-   Note that a port must be an input or an output port but not both
-   and that a port must be a control or audio port but not both. */
-
-typedef int LADSPA_PortDescriptor;
-
-/* Property LADSPA_PORT_INPUT indicates that the port is an input. */
-#define LADSPA_PORT_INPUT   0x1
-
-/* Property LADSPA_PORT_OUTPUT indicates that the port is an output. */
-#define LADSPA_PORT_OUTPUT  0x2
-
-/* Property LADSPA_PORT_CONTROL indicates that the port is a control
-   port. */
-#define LADSPA_PORT_CONTROL 0x4
-
-/* Property LADSPA_PORT_AUDIO indicates that the port is a audio
-   port. */
-#define LADSPA_PORT_AUDIO   0x8
-
-#define LADSPA_IS_PORT_INPUT(x)   ((x) & LADSPA_PORT_INPUT)
-#define LADSPA_IS_PORT_OUTPUT(x)  ((x) & LADSPA_PORT_OUTPUT)
-#define LADSPA_IS_PORT_CONTROL(x) ((x) & LADSPA_PORT_CONTROL)
-#define LADSPA_IS_PORT_AUDIO(x)   ((x) & LADSPA_PORT_AUDIO)
-
-/*****************************************************************************/
-
-/* Plugin Port Range Hints:
-
-   The host may wish to provide a representation of data entering or
-   leaving a plugin (e.g. to generate a GUI automatically). To make
-   this more meaningful, the plugin should provide `hints' to the host
-   describing the usual values taken by the data.
-
-   Note that these are only hints. The host may ignore them and the
-   plugin must not assume that data supplied to it is meaningful. If
-   the plugin receives invalid input data it is expected to continue
-   to run without failure and, where possible, produce a sensible
-   output (e.g. a high-pass filter given a negative cutoff frequency
-   might switch to an all-pass mode).
-
-   Hints are meaningful for all input and output ports but hints for
-   input control ports are expected to be particularly useful.
-
-   More hint information is encapsulated in the
-   LADSPA_PortRangeHintDescriptor type which is assembled by ORing
-   individual hint types together. Hints may require further
-   LowerBound and UpperBound information.
-
-   All the hint information for a particular port is aggregated in the
-   LADSPA_PortRangeHint structure. */
-
-typedef int LADSPA_PortRangeHintDescriptor;
-
-/* Hint LADSPA_HINT_BOUNDED_BELOW indicates that the LowerBound field
-   of the LADSPA_PortRangeHint should be considered meaningful. The
-   value in this field should be considered the (inclusive) lower
-   bound of the valid range. If LADSPA_HINT_SAMPLE_RATE is also
-   specified then the value of LowerBound should be multiplied by the
-   sample rate. */
-#define LADSPA_HINT_BOUNDED_BELOW   0x1
-
-/* Hint LADSPA_HINT_BOUNDED_ABOVE indicates that the UpperBound field
-   of the LADSPA_PortRangeHint should be considered meaningful. The
-   value in this field should be considered the (inclusive) upper
-   bound of the valid range. If LADSPA_HINT_SAMPLE_RATE is also
-   specified then the value of UpperBound should be multiplied by the
-   sample rate. */
-#define LADSPA_HINT_BOUNDED_ABOVE   0x2
-
-/* Hint LADSPA_HINT_TOGGLED indicates that the data item should be
-   considered a Boolean toggle. Data less than or equal to zero should
-   be considered `off' or `false,' and data above zero should be
-   considered `on' or `true.' LADSPA_HINT_TOGGLED may not be used in
-   conjunction with any other hint except LADSPA_HINT_DEFAULT_0 or
-   LADSPA_HINT_DEFAULT_1. */
-#define LADSPA_HINT_TOGGLED         0x4
-
-/* Hint LADSPA_HINT_SAMPLE_RATE indicates that any bounds specified
-   should be interpreted as multiples of the sample rate. For
-   instance, a frequency range from 0Hz to the Nyquist frequency (half
-   the sample rate) could be requested by this hint in conjunction
-   with LowerBound = 0 and UpperBound = 0.5. Hosts that support bounds
-   at all must support this hint to retain meaning. */
-#define LADSPA_HINT_SAMPLE_RATE     0x8
-
-/* Hint LADSPA_HINT_LOGARITHMIC indicates that it is likely that the
-   user will find it more intuitive to view values using a logarithmic
-   scale. This is particularly useful for frequencies and gains. */
-#define LADSPA_HINT_LOGARITHMIC     0x10
-
-/* Hint LADSPA_HINT_INTEGER indicates that a user interface would
-   probably wish to provide a stepped control taking only integer
-   values. Any bounds set should be slightly wider than the actual
-   integer range required to avoid floating point rounding errors. For
-   instance, the integer set {0,1,2,3} might be described as [-0.1,
-   3.1]. */
-#define LADSPA_HINT_INTEGER         0x20
-
-/* The various LADSPA_HINT_HAS_DEFAULT_* hints indicate a `normal'
-   value for the port that is sensible as a default. For instance,
-   this value is suitable for use as an initial value in a user
-   interface or as a value the host might assign to a control port
-   when the user has not provided one. Defaults are encoded using a
-   mask so only one default may be specified for a port. Some of the
-   hints make use of lower and upper bounds, in which case the
-   relevant bound or bounds must be available and
-   LADSPA_HINT_SAMPLE_RATE must be applied as usual. The resulting
-   default must be rounded if LADSPA_HINT_INTEGER is present. Default
-   values were introduced in LADSPA v1.1. */
-#define LADSPA_HINT_DEFAULT_MASK    0x3C0
-
-/* This default values indicates that no default is provided. */
-#define LADSPA_HINT_DEFAULT_NONE    0x0
-
-/* This default hint indicates that the suggested lower bound for the
-   port should be used. */
-#define LADSPA_HINT_DEFAULT_MINIMUM 0x40
-
-/* This default hint indicates that a low value between the suggested
-   lower and upper bounds should be chosen. For ports with
-   LADSPA_HINT_LOGARITHMIC, this should be exp(log(lower) * 0.75 +
-   log(upper) * 0.25). Otherwise, this should be (lower * 0.75 + upper
-   * 0.25). */
-#define LADSPA_HINT_DEFAULT_LOW     0x80
-
-/* This default hint indicates that a middle value between the
-   suggested lower and upper bounds should be chosen. For ports with
-   LADSPA_HINT_LOGARITHMIC, this should be exp(log(lower) * 0.5 +
-   log(upper) * 0.5). Otherwise, this should be (lower * 0.5 + upper *
-   0.5). */
-#define LADSPA_HINT_DEFAULT_MIDDLE  0xC0
-
-/* This default hint indicates that a high value between the suggested
-   lower and upper bounds should be chosen. For ports with
-   LADSPA_HINT_LOGARITHMIC, this should be exp(log(lower) * 0.25 +
-   log(upper) * 0.75). Otherwise, this should be (lower * 0.25 + upper
-   * 0.75). */
-#define LADSPA_HINT_DEFAULT_HIGH    0x100
-
-/* This default hint indicates that the suggested upper bound for the
-   port should be used. */
-#define LADSPA_HINT_DEFAULT_MAXIMUM 0x140
-
-/* This default hint indicates that the number 0 should be used. Note
-   that this default may be used in conjunction with
-   LADSPA_HINT_TOGGLED. */
-#define LADSPA_HINT_DEFAULT_0       0x200
-
-/* This default hint indicates that the number 1 should be used. Note
-   that this default may be used in conjunction with
-   LADSPA_HINT_TOGGLED. */
-#define LADSPA_HINT_DEFAULT_1       0x240
-
-/* This default hint indicates that the number 100 should be used. */
-#define LADSPA_HINT_DEFAULT_100     0x280
-
-/* This default hint indicates that the Hz frequency of `concert A'
-   should be used. This will be 440 unless the host uses an unusual
-   tuning convention, in which case it may be within a few Hz. */
-#define LADSPA_HINT_DEFAULT_440     0x2C0
-
-#define LADSPA_IS_HINT_BOUNDED_BELOW(x) ((x) & LADSPA_HINT_BOUNDED_BELOW)
-#define LADSPA_IS_HINT_BOUNDED_ABOVE(x) ((x) & LADSPA_HINT_BOUNDED_ABOVE)
-#define LADSPA_IS_HINT_TOGGLED(x)       ((x) & LADSPA_HINT_TOGGLED)
-#define LADSPA_IS_HINT_SAMPLE_RATE(x)   ((x) & LADSPA_HINT_SAMPLE_RATE)
-#define LADSPA_IS_HINT_LOGARITHMIC(x)   ((x) & LADSPA_HINT_LOGARITHMIC)
-#define LADSPA_IS_HINT_INTEGER(x)       ((x) & LADSPA_HINT_INTEGER)
-
-#define LADSPA_IS_HINT_HAS_DEFAULT(x)   ((x) & LADSPA_HINT_DEFAULT_MASK)
-#define LADSPA_IS_HINT_DEFAULT_MINIMUM(x)  (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_MINIMUM)
-#define LADSPA_IS_HINT_DEFAULT_LOW(x)      (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_LOW)
-#define LADSPA_IS_HINT_DEFAULT_MIDDLE(x)   (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_MIDDLE)
-#define LADSPA_IS_HINT_DEFAULT_HIGH(x)     (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_HIGH)
-#define LADSPA_IS_HINT_DEFAULT_MAXIMUM(x)  (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_MAXIMUM)
-#define LADSPA_IS_HINT_DEFAULT_0(x)        (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_0)
-#define LADSPA_IS_HINT_DEFAULT_1(x)        (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_1)
-#define LADSPA_IS_HINT_DEFAULT_100(x)      (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_100)
-#define LADSPA_IS_HINT_DEFAULT_440(x)      (((x) & LADSPA_HINT_DEFAULT_MASK)     \
-                                         == LADSPA_HINT_DEFAULT_440)
-
-typedef struct _LADSPA_PortRangeHint {
-
-  /* Hints about the port. */
-  LADSPA_PortRangeHintDescriptor HintDescriptor;
-
-  /* Meaningful when hint LADSPA_HINT_BOUNDED_BELOW is active. When
-     LADSPA_HINT_SAMPLE_RATE is also active then this value should be
-     multiplied by the relevant sample rate. */
-  LADSPA_Data LowerBound;
-
-  /* Meaningful when hint LADSPA_HINT_BOUNDED_ABOVE is active. When
-     LADSPA_HINT_SAMPLE_RATE is also active then this value should be
-     multiplied by the relevant sample rate. */
-  LADSPA_Data UpperBound;
-
-} LADSPA_PortRangeHint;
-
-/*****************************************************************************/
-
-/* Plugin Handles:
-
-   This plugin handle indicates a particular instance of the plugin
-   concerned. It is valid to compare this to NULL (0 for C++) but
-   otherwise the host should not attempt to interpret it. The plugin
-   may use it to reference internal instance data. */
-
-typedef void * LADSPA_Handle;
-
-/*****************************************************************************/
-
-/* Descriptor for a Type of Plugin:
-
-   This structure is used to describe a plugin type. It provides a
-   number of functions to examine the type, instantiate it, link it to
-   buffers and workspaces and to run it. */
-
-typedef struct _LADSPA_Descriptor {
-
-  /* This numeric identifier indicates the plugin type
-     uniquely. Plugin programmers may reserve ranges of IDs from a
-     central body to avoid clashes. Hosts may assume that IDs are
-     below 0x1000000. */
-  unsigned long UniqueID;
-
-  /* This identifier can be used as a unique, case-sensitive
-     identifier for the plugin type within the plugin file. Plugin
-     types should be identified by file and label rather than by index
-     or plugin name, which may be changed in new plugin
-     versions. Labels must not contain white-space characters. */
-  const char * Label;
-
-  /* This indicates a number of properties of the plugin. */
-  LADSPA_Properties Properties;
-
-  /* This member points to the null-terminated name of the plugin
-     (e.g. "Sine Oscillator"). */
-  const char * Name;
-
-  /* This member points to the null-terminated string indicating the
-     maker of the plugin. This can be an empty string but not NULL. */
-  const char * Maker;
-
-  /* This member points to the null-terminated string indicating any
-     copyright applying to the plugin. If no Copyright applies the
-     string "None" should be used. */
-  const char * Copyright;
-
-  /* This indicates the number of ports (input AND output) present on
-     the plugin. */
-  unsigned long PortCount;
-
-  /* This member indicates an array of port descriptors. Valid indices
-     vary from 0 to PortCount-1. */
-  const LADSPA_PortDescriptor * PortDescriptors;
-
-  /* This member indicates an array of null-terminated strings
-     describing ports (e.g. "Frequency (Hz)"). Valid indices vary from
-     0 to PortCount-1. */
-  const char * const * PortNames;
-
-  /* This member indicates an array of range hints for each port (see
-     above). Valid indices vary from 0 to PortCount-1. */
-  const LADSPA_PortRangeHint * PortRangeHints;
-
-  /* This may be used by the plugin developer to pass any custom
-     implementation data into an instantiate call. It must not be used
-     or interpreted by the host. It is expected that most plugin
-     writers will not use this facility as LADSPA_Handle should be
-     used to hold instance data. */
-  void * ImplementationData;
-
-  /* This member is a function pointer that instantiates a plugin. A
-     handle is returned indicating the new plugin instance. The
-     instantiation function accepts a sample rate as a parameter. The
-     plugin descriptor from which this instantiate function was found
-     must also be passed. This function must return NULL if
-     instantiation fails.
-
-     Note that instance initialisation should generally occur in
-     activate() rather than here. */
-  LADSPA_Handle (*instantiate)(const struct _LADSPA_Descriptor * Descriptor,
-                               unsigned long                     SampleRate);
-
-  /* This member is a function pointer that connects a port on an
-     instantiated plugin to a memory location at which a block of data
-     for the port will be read/written. The data location is expected
-     to be an array of LADSPA_Data for audio ports or a single
-     LADSPA_Data value for control ports. Memory issues will be
-     managed by the host. The plugin must read/write the data at these
-     locations every time run() or run_adding() is called and the data
-     present at the time of this connection call should not be
-     considered meaningful.
-
-     connect_port() may be called more than once for a plugin instance
-     to allow the host to change the buffers that the plugin is
-     reading or writing. These calls may be made before or after
-     activate() or deactivate() calls.
-
-     connect_port() must be called at least once for each port before
-     run() or run_adding() is called. When working with blocks of
-     LADSPA_Data the plugin should pay careful attention to the block
-     size passed to the run function as the block allocated may only
-     just be large enough to contain the block of samples.
-
-     Plugin writers should be aware that the host may elect to use the
-     same buffer for more than one port and even use the same buffer
-     for both input and output (see LADSPA_PROPERTY_INPLACE_BROKEN).
-     However, overlapped buffers or use of a single buffer for both
-     audio and control data may result in unexpected behaviour. */
-   void (*connect_port)(LADSPA_Handle Instance,
-                        unsigned long Port,
-                        LADSPA_Data * DataLocation);
-
-  /* This member is a function pointer that initialises a plugin
-     instance and activates it for use. This is separated from
-     instantiate() to aid real-time support and so that hosts can
-     reinitialise a plugin instance by calling deactivate() and then
-     activate(). In this case the plugin instance must reset all state
-     information dependent on the history of the plugin instance
-     except for any data locations provided by connect_port() and any
-     gain set by set_run_adding_gain(). If there is nothing for
-     activate() to do then the plugin writer may provide a NULL rather
-     than an empty function.
-
-     When present, hosts must call this function once before run() (or
-     run_adding()) is called for the first time. This call should be
-     made as close to the run() call as possible and indicates to
-     real-time plugins that they are now live. Plugins should not rely
-     on a prompt call to run() after activate(). activate() may not be
-     called again unless deactivate() is called first. Note that
-     connect_port() may be called before or after a call to
-     activate(). */
-  void (*activate)(LADSPA_Handle Instance);
-
-  /* This method is a function pointer that runs an instance of a
-     plugin for a block. Two parameters are required: the first is a
-     handle to the particular instance to be run and the second
-     indicates the block size (in samples) for which the plugin
-     instance may run.
-
-     Note that if an activate() function exists then it must be called
-     before run() or run_adding(). If deactivate() is called for a
-     plugin instance then the plugin instance may not be reused until
-     activate() has been called again.
-
-     If the plugin has the property LADSPA_PROPERTY_HARD_RT_CAPABLE
-     then there are various things that the plugin should not do
-     within the run() or run_adding() functions (see above). */
-  void (*run)(LADSPA_Handle Instance,
-              unsigned long SampleCount);
-
-  /* This method is a function pointer that runs an instance of a
-     plugin for a block. This has identical behaviour to run() except
-     in the way data is output from the plugin. When run() is used,
-     values are written directly to the memory areas associated with
-     the output ports. However when run_adding() is called, values
-     must be added to the values already present in the memory
-     areas. Furthermore, output values written must be scaled by the
-     current gain set by set_run_adding_gain() (see below) before
-     addition.
-
-     run_adding() is optional. When it is not provided by a plugin,
-     this function pointer must be set to NULL. When it is provided,
-     the function set_run_adding_gain() must be provided also. */
-  void (*run_adding)(LADSPA_Handle Instance,
-		     unsigned long SampleCount);
-
-  /* This method is a function pointer that sets the output gain for
-     use when run_adding() is called (see above). If this function is
-     never called the gain is assumed to default to 1. Gain
-     information should be retained when activate() or deactivate()
-     are called.
-
-     This function should be provided by the plugin if and only if the
-     run_adding() function is provided. When it is absent this
-     function pointer must be set to NULL. */
-  void (*set_run_adding_gain)(LADSPA_Handle Instance,
-			      LADSPA_Data   Gain);
-
-  /* This is the counterpart to activate() (see above). If there is
-     nothing for deactivate() to do then the plugin writer may provide
-     a NULL rather than an empty function.
-
-     Hosts must deactivate all activated units after they have been
-     run() (or run_adding()) for the last time. This call should be
-     made as close to the last run() call as possible and indicates to
-     real-time plugins that they are no longer live. Plugins should
-     not rely on prompt deactivation. Note that connect_port() may be
-     called before or after a call to deactivate().
-
-     Deactivation is not similar to pausing as the plugin instance
-     will be reinitialised when activate() is called to reuse it. */
-  void (*deactivate)(LADSPA_Handle Instance);
-
-  /* Once an instance of a plugin has been finished with it can be
-     deleted using the following function. The instance handle passed
-     ceases to be valid after this call.
-
-     If activate() was called for a plugin instance then a
-     corresponding call to deactivate() must be made before cleanup()
-     is called. */
-  void (*cleanup)(LADSPA_Handle Instance);
-
-} LADSPA_Descriptor;
-
-/**********************************************************************/
-
-/* Accessing a Plugin: */
-
-/* The exact mechanism by which plugins are loaded is host-dependent,
-   however all most hosts will need to know is the name of shared
-   object file containing the plugin types. To allow multiple hosts to
-   share plugin types, hosts may wish to check for environment
-   variable LADSPA_PATH. If present, this should contain a
-   colon-separated path indicating directories that should be searched
-   (in order) when loading plugin types.
-
-   A plugin programmer must include a function called
-   "ladspa_descriptor" with the following function prototype within
-   the shared object file. This function will have C-style linkage (if
-   you are using C++ this is taken care of by the `extern "C"' clause
-   at the top of the file).
-
-   A host will find the plugin shared object file by one means or
-   another, find the ladspa_descriptor() function, call it, and
-   proceed from there.
-
-   Plugin types are accessed by index (not ID) using values from 0
-   upwards. Out of range indexes must result in this function
-   returning NULL, so the plugin count can be determined by checking
-   for the least index that results in NULL being returned. */
-
-const LADSPA_Descriptor * ladspa_descriptor(unsigned long Index);
-
-/* Datatype corresponding to the ladspa_descriptor() function. */
-typedef const LADSPA_Descriptor *
-(*LADSPA_Descriptor_Function)(unsigned long Index);
-
-/**********************************************************************/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* LADSPA_INCLUDED */
-
-/* EOF */
diff --git a/muse2/muse/plugin.h b/muse2/muse/plugin.h
index 06e99564..39da5edf 100644
--- a/muse2/muse/plugin.h
+++ b/muse2/muse/plugin.h
@@ -34,7 +34,7 @@
 #include <QUiLoader>
 
 
-#include "ladspa.h"
+#include <ladspa.h>
 #include "globals.h"
 #include "globaldefs.h"
 #include "ctrl.h"