new branch muse2, first checkin

1 files changed, 3703 insertions, 0 deletions

diff --git a/muse2/ChangeLog b/muse2/ChangeLog
new file mode 100644
index 00000000..a5cd7d5e
--- /dev/null
+++ b/muse2/ChangeLog
@@ -0,0 +1,3703 @@
+09.10.2010
+      * Fixed: Gluing of midi track parts, over tempo changes, caused incorrect note times and lengths. (T356)
+        - Fixed Song::cmdGluePart().
+08.10.2010
+      * Disabled: Precount does not work, disabled function in gui (rj)
+      =======================================
+      * 1.1 tagged (rj)
+      =======================================
+      * added: missing headerfile in dssihost.cpp, required for building on Ubuntu Maverick (rj)
+21.09.2010
+      * Fixed: Mixers not restoring their size properly upon song load. (T356)
+        - Rearranged MusE::loadProjectFile1() slightly so mixer resizing done at end. Tested OK.
+      * Changed: Disabled some optimized code always enabled in Dsp::cpy(), for now, in case of 64-bit issues. (T356) 
+16.09.2010
+      * Created rc2 release for 1.1 (rj)
+      * Fixed: Delete track(s) not disconnecting track routes, causing routes to hang around and store in song file. (T356)
+        - Fixed major regressions (my fault) in Song::insertTrack2() and ::removeTrack2().
+      * Fixed: Dummy audio device: Crashes when Jack midi device created in device manager, or loaded from song. (T356)
+        - This allows to create Jack midi devices even when dummy audio driver is used.
+        - Tested OK loading complex Jack midi based songs with dummy audio driver.
+      * Fixed: AlsaTimer cannot start, with dummy audio device. (T356) 
+        - Reverted: Back to default SND_TIMER_GLOBAL_SYSTEM in AlsaTimer, for now until a better fix. 
+        - Also replaced pop-up warning in dummy loop with terminal output instead.
+      * Changed: MidiDevice <-> Track routes replaced with MidiPort <-> Track routes. (T356)
+        - This allows to change a port's device (even to <none> !) while keeping all the track channel routes.
+      * Changed: Single midi <-> track route with channel mask, instead of one route-per-channel. (T356)
+        - Potentially saving very many routes from memory and in song file.
+10.09.2010
+      * Fixed: regression with oR routing for Aux strips (rj)
+05.09.2010
+      * Fixed: shortcut for insert moved to Ctrl+Shift+X (rj)
+      * Added: Select all toggle for midi channels iR menu (rj)
+      * Added: Auto-route-connect old songs with obsolete midi input port/channel masks (before iR button added). (T356) 
+        - Added MidiTrack::setInPortAndChannelMask() and called it from MidiTrack::read().
+03.09.2010
+      * Changed: Updated German localizations muse_de.qm and muse_de.ts from <babarosa [at] gmx.at> (T356)
+      * Added: Instrument definitions and drum maps for Kurzweil SP2X, from <babarosa [at] gmx.at> (T356)
+28.08.2010
+      * Created rc1 release for 1.1 (rj)
+      * Added: Instrument definitions for AKAI SG01 and Waldorf-microQ from <babarosa [at] gmx.at> (rj)
+23.08.2010
+      * Added: Possibility to turn on/off move-armed-track with track selection in settings (rj)
+21.08.2010
+      * Renamed: Soft synth configuration changed to Synth configuration, as per patch from Geoff King (rj)
+      * Fixed: Shortcuts with modifier keys wasn't working for global shortcuts, should be now (rj)
+      * Added: Shortcuts for changing len of events, default Ctrl+Shift+Left/Right (rj)
+>>>>>>> .r459
+10.08.2010
+      * Fixed/Changed: Grid reacts to midi resolution change (rj)
+01.08.2010
+      * Added: Move track selection when part selection is moved, is this a good approach? (rj)
+      * Added: Backspace unarms all armed tracks (rj)
+24.07.2010
+      * Feature: Audio and midi routing popup menus now stay open, for making rapid connections. (T356)
+      * Fixed: Delete some objects hanging around upon close like song, audio, midiSeq, and prefetch. (T356)
+               TODO: Find a way to delete the 'muse' object without causing problems like seg faults.
+21.07.2010
+      * Improved: Note lanes in pianoroll and marking of C-notes (rj)
+20.07.2010
+      * Fixed: illegal shortcut no longer reported on startup (rj)
+18.07.2010
+      * Fixed: Handle errors during timer initialization more gracefully (rj)
+15.07.2010
+      * Added: Volume control for audio metronome (rj)
+12.07.2010
+      * Fixed: When wave files were edited allocation was on stack which caused crashes for larger selections, now done on heap (rj)
+      * Added: Print svn version in -v and About box. (rj)
+      * Fixed: Bug with RemoveShortEvents plugin script, would not remove anything due to index error (rj)
+10.07.2010
+      * Added: Insert measure, inserts empty space and moves everything after playpointer to the right and
+               Part-insert, pastes parts and moves everything after the paste point to the right
+               it's currently not possible to change the shortcuts for these, wip (rj)
+06.07.2010
+      * Added: Button in transport to enable/disable jack transport. (rj)
+      * Fixed: Dropdown Snap and Type in arranger toolbar no longer steal focus, annoyed the helloutame (rj)
+      * Fixed: Making edits to larger chunks in wave files no longer cause a crash, heap is used for allocation (rj)
+      * Improved: Part selection when navigating with keyboard, previously there was sometimes a need to use the mouse
+        to get a part selected, now the first one should be selected (rj)
+      * Added: some automation (very)wip stuff, not enabled, just to get it off my harddrive (rj)
+22.06.2010
+      * Fixed: Crashes loading a song while another is loaded. Or worse, it loads but saving corrupts the file! (T356)
+        - Song::clear(): Clear all midi port devices. Delete Jack midi devices, and remove all ALSA midi device routes.
+        - Route::read() Ignore bogus midi routes in med file if the device they refer to is not in use by the song (port is -1).
+        - MidiJackDevice::writeRouting(), MidiAlsaDevice::writeRouting(): Ignore and do not write midi routes if the device 
+           they refer to is not in use by the song (port is -1). This prevents bogus midi routes writing to med file.
+        - Fifo::~Fifo(): Free the buffers! Fifo::getWriteBuffer(), Fifo::put(): Verify allocation. Fifo::get(): Verify buffers.
+15.06.2010
+      * Fixed: Jack midi output: Sent pitch bend and program values were incorrect, if coming from midi keyboard. (T356)
+        - Reported by Pieter while using Hurdy Gurdy vst under fst. Tests OK now, here.
+      * Fixed: Drum editor: Controller graph not in current tool mode (pencil, eraser etc.), when first opened. (T356)
+        - Call setTool() in DrumEdit::addCtrl().
+      * Fixing: Drum editor: Velocity controller graph showing incorrect for selected drum, or showing for all drums, when first opened. (T356) 
+        - WIP. Still not quite correct, but at least now it doesn't show all drum velocities when first opened. 
+          (This is interesting! I will try to allow 'no drum' list selection, to show all drum velocities at once, just like piano roll.)
+13.06.2010
+      * Fixed: More fixes to marker list, selected item was still not right. (T356)
+03.06.2010
+      * Fixed: Time signature editing problems in master track list and gui. (T356)
+        - Fixed SigEdit::outOfRange(). Added Sig::isValid(), and check it in LMaster::returnPressed() to fix crash with 0 n or z.
+      * Fixed: Marker/list problems. Double entries. Pianoroll/arranger timescale 'shift-left/right-click-to-add/del-marker' fixed. 
+               Marker 'lock' (smpte/ticks) works now. Up/down buttons fixed. Marker list selection 'stays put' now 
+                when adding or deleting markers. (T356)
+      * Fixed: Graphics corruption in arranger and track list when vertically scrolling. (T356)
+        - Changed rectangle to full w/h in 'shift down' section of View::setYPos() and TList::setYPos().
+          Should not have to do this, but it cured my problems. No noticable change in speed.
+        - Arranger corruption occured on more than one machine with xorg nv, ati drivers. More severe arranger AND track list 
+           corruption occured with proprietary drivers. Corruption is also observed in several other windows (ex. ladspa browser) 
+           but there's not much I can do, the corruption is found in ordinary usage of QListView for example.
+      * Changed: Increased arranger vertical scroll step, was too slow to scroll. (T356)
+      * Possible fix: Auto-scroll in pianoroll and arranger take waaay too long to stop scrolling. (T356)
+        - Increased timer timeout from 40 to 80 ms in Canvas::scrollTimerDone(). Helped for me, on a 1.6Ghz P4...
+      * Changed: Ladspa plugin guis now have scroll bars. Helps when there are many controls. (T356)
+        - Still toying with the code a bit, please bear with me while I try to get it right.
+      * Started: Addition of MusE-native ladspa guis for dssi synths. (T356)
+        - No visible changes yet, just under the hood. Added class PluginIBase which is inherited by
+           DssiSynthIF and PluginI. Changed class PluginGui and DssiSynthIF to fit. 
+07.05.2010
+      * Fixed: Xml file trouble: Tag attributes not storing xml-friendly entities, trouble reloading song. (T356)
+        - Fixed all usages of Xml::nput, ::put, ::tag, and ::etag. Discovered by Geoff B.
+06.05.2010
+      * Fixed: Audio Input tracks: Loud noises or DC output with unconnected input routes. (T356)
+        - AudioInput::getData(): Do not get buffers of unconnected client ports. Causes repeating leftover data.
+      * Fixed: Audio Input tracks: Stereo processing not correct if both input routes connected to same port. (T356)
+        - AudioInput::getData(): Just copy the buffers always, don't set buffer pointer directly.
+      * Fixed: Effect rack plugins: Not saving correct number of plugin channels. Upon reload, channels are wrong. (T356)
+        - PluginI::writeConfiguration() and PluginI::readConfiguration(): Write and read the channels, not instances.
+        - Optimize TODO: Is xml plugin 'channel' really necessary? Well not now, but later if we optimize the effect rack
+           by not creating redundant plugin instances if the next plugin in the rack doesn't need them.
+          What I have changed is always make the number of plugin channels equal to the number of track channels.  
+          PluginI::setChannels() and PluginI::initPluginInstance() then sort out the details of how many instances to create.
+      * Fixed: Effect rack plugins: Some plugins crash MusE, for example plugins with no audio outputs. (T356)
+        - PluginI::setChannels() and PluginI::initPluginInstance(): Be more aware of different audio ins and outs. 
+      * Added: First draft help file README.effects-rack titled "Understanding the Effects Rack". (T356)
+        - Details how MusE uses plugins, especially now with these changes.
+27.04.2010
+      * Changed: Building: Separate --enable-dssi --enable-osc configure options. (T356) 
+        --enable-dssi (Enable dssi synths AND special handling of dssi-vst ladspa effect plugins. No guis if by itself.) and 
+        --enable-osc (Enable dssi guis. Useless by itself at the moment). 
+        Use both for best features. 
+      * Feature: If dssi and osc support are enabled, audio track effects rack dssi-vst plugins can now show their NATIVE guis. (T356)
+      * Fixed: Storing dssi synth states. Remembers current program, all configure strings, and control settings - for current program ONLY. (T356)
+        - With dssi-vst synths, some better are than others at remembering program.
+        - Todo: Ignore unwanted dssi-vst config strings/values like "guiVisible" "<name-of-fifo-file>" (gives non-fatal error on reload).
+      * Fixed: Dssi native synths (hexter, LTS etc.) should actually work now. Their gui controls operate the sounds now. (T356) 
+        - Todo: If using large audio buffers (Jack), my 'one-at-a-time-per-audio-process' osc control fifo streams kinda suck, 
+           with a delay in their processing. Want to try MULTIPLE 'run's or 'run-multiple's PER audio process, for SAMPLE accuracy and
+           better quicker message processing. Just need to add a timestamp to my osc fifo items, then all forms of change - whether
+           control, midi event, or program - have a timestamp with which we can SPLIT UP the runs into 'runs between changes'.
+      * Tip: Currently a patch to dssi-vst is required for their guis to update properly. (For now, ask about this on our lists.)
+21.04.2010
+      * Fixed: Shortcut for moving between tracks in arranger. Ctrl+Up/Down (rj)
+19.04.2010
+      * Patch: Fix for libdir bug causing synths to not be available on some 64bit systems. By Orcan Ogetbil (rj)
+      * Fixed: Drawing of grid when snaping to less than measure (rj)
+12.04.2010
+      * Fixed: LADSPA rack effects: Do not display LADSPA output controls (such as latency). (T356)
+      * Fixed: Bug when cancelling 'save as' operation, says 'file exists'. Caused by my earlier compressed save fixes. (T356)
+11.04.2010
+      * Fixed: DSSI requested midi mapped controls were not correct. (T356)
+      * Changed: Working on controllers, and saving their state. Synths like Organ should remember their state now. (T356)
+        - Working on DSSI controls... Working on OSC stuff...
+06.04.2010
+      * Fixed: Jack midi, and DSSI: Midi controller knobs, sliders, boxes etc. not updating with current values. (T356)
+        - Copied code in MidiPort::sendEvent() to JackMidi::processMidi() and DssiSynthIF::getData().
+      * Fixed: DSSI: Crashing with unkown controllers sent to synths. (T356)
+        - Ignore unkown controllers in DssiSynthIF::processEvent(). 
+05.04.2010
+      * Added: Rec enabled track moved with selection when only one track is rec enabled (rj)
+      * Changed: Made canvas show grid the default (rj)
+      * Added: Jack midi ports can now be renamed in the ports list dialog, by clicking on the name. (T356)
+        - Also cleaned up ports list behaviour and added tooltips.
+30.03.2010
+      * Major reworks: Jack midi, routing system, multichannel synth ins/outs, midi strips and trackinfo pane. (T356)
+        - WORK IN PROGRESS. Should be usable for current projects.
+        - ADVISORY: If opening current projects you are advised to "save as" or back up your med files (waves should be OK)
+           until all is deemed to be working OK. It is possible more changes to .med file structure are needed later.
+        - Some .med project file structures have CHANGED (like routing). I have tested opening large existing projects, 
+           then re-saving them. OK so far.
+          However, I have not added importing code for the old midi trackinfo panel 'input port' and 'input channel' boxes (gone now).
+          If you want to wait, I am planning to do that, but later... Otherwise you must re-enter them with the new midi input routing.
+        - ** Multichannel synth inputs and outputs: Fairly satisfied with popup menus, hopefully no major reworks... 
+          Routing system fully supports multichannel synth mono/stero paths but is NOT COMPLETE yet. 
+          When changing a connected track from stereo to mono, there is no coding yet to ensure the existing stereo routes are 
+           changed from stereo to mono (just like the audio input and output tracks have always done with Jack routes).
+          Also coding must be added to avoid simultaneous mono and stereo routes - make them mutually exclusive - although
+           there's nothing technically wrong with it, it's just not desirable. 
+        - ** Jack midi: You now create your own Jack midi ports. I have not added any means to delete them yet, but I believe
+           if you 'unselect' them in the midi ports list so that they are not used, then the saved .med file will ignore them.
+        - Multi-instances of MusE should work OK now - all ports should hopefully have unique names.    
+        - Number of midi ports increased from 32 to 128. It's a bit much for the ports list, was planning "create your own
+           midi port as needed" (like RG). Obstacles seem to have been cleared now, but it would be a big job (lots of places to change).
+        - Along the way various tweaks and fixes when I spotted them.
+18.02.2010
+      * Added: Separate Jack midi client ports per MusE port. (T356)
+        - For now, you will have to manually add further connections to those ports if desired, each session.
+        - Tested OK rec/play so far.
+      * Fixed: Some inconsistencies in midi controller number decoding. (T356)
+        - Everything now references the values listed in midictrl.h
+      * Fixed: Some Jack code was not calling free after calling certain functions. (T356)
+      * Changed: Midi priority now deaults to audio priority +1. (T356)
+        - Thanks to RJ for the convincing argument.
+14.02.2010
+      * Added: Jack midi input should be working now. Controllers, too. (T356)
+        - Tested with large 1024 frame buffer. Events are recorded with good sub-tick (frame) resolution,
+           as viewed in pianoroll with 64T snap grid. 
+13.02.2010
+      * Fixed: Jack midi output should now be frame-accurate, support variable length events (like sysex), 
+                and most controllers should work. (T356)
+        - TODO: No record yet. Just playback. 
+        - TODO: I have code in place for multiple device listing (like ALSA) with auto-connect, 
+           instead of single 'jackmidi' device, but it doesn't seem to want to actually connect. 
+          Simply enable the #define JACK_MIDI_SHOW_MULTIPLE_DEVICES in driver/jackmidi.h 
+           and it will magically switch. Shows port names as their alias #1 (with a rem'able line to 
+           revert to non-alias names - to be made configurable later). I swear it was working, 
+           then intermittent, then not at all. Hmm...
+06.02.2010
+      * Fixed: MusE hanging on close, with Jack driver. (T356)
+        - Unregister Jack midi ports on destruction of JackAudioDevice.
+05.02.2010
+      * Fixed: Top level windows: Do not open if there are no parts. Case: bogus -1 top-level part index stored in med file. (T356)
+        - Changed MusE::readToplevels() and stuff in listedit.cpp
+        - Was causing crash of list editor upon loading a song saved with the list editor open. 
+          Somehow a bogus -1 top-level part index can make it in to the .med file. Checking this...
+      * Changed: Preparations for audio processors: Moved stuff out of class Event and into class WavePart. (T356)
+        - WavePart needs a converter map to lookup events in the part's (shared) event list, in case clones exist !
+          Ughh, it's going to be tough to ensure the map is always correct because an event cannot tell what part owns it...
+04.02.2010
+      * Improved: Grid handling in arranger improved, it should now be actually usable (rj)
+01.02.2010
+      * Fixed: Jack midi output: Stuck or missing notes. (T356)
+        - Must only be one jack_midi_event_reserve() per event in handle_jack_midi_out_events().
+31.01.2010
+      * Changed: Midi sync window: Clock is now seperated from other real time commands (play/stop etc). (T356)
+31.01.2010
+      * Fixed: Midi sync in: Should be very solid and 'in time' now, play/stop/continue. (T356)
+        - Re-coded to begin incrementing immediately upon first-clock detection. Forbid MusE to send transport commands 
+           while in external sync mode - our sync router handles that. Was causing problems. 
+        - Tested OK: Ensoniq ESQ-1 KB (sends clocks ony between start and stop) and Roland TR-505 drums (clocks always running). 
+          The measured general timings were quite different, but (thankfully) clocks and events were not. 
+        - MusE responds better to the TR-505 than the ESQ-1 does with a direct midi cable connection! (ESQ gains ticks on continue).
+      * Added: Midi sync window: 'Rewind on start' column. (Also a 'Send first clock delay' box - not implemented yet). (T356)
+29.01.2010
+      * Feature: Dummy audio driver: Added global settings for sample rate and period size. (T356)
+        - The period size affects midi resolution, and the default was just too long. So this was added.
+27.01.2010
+      * Changed: Don't process audio prefetch, or getData() in Audio::copyData(), if track is 'Off'. (T356)
+      * Added: Arranger track list: Quick 'right-click' or 'ctrl-click' or 'ctrl-mouse-wheel' toggling of Track On/Off. (T356) 
+        - Note this includes midi tracks now! Remains to be seen whether allowing midi off is useful and will work, 
+           or should be filtered out. **TODO: Turn off remaining controls in midi strips, turn off actual midi playback and record.
+      * Feature: Initial Jack midi support. Imported from Larry Valkama's GIT repo. (T356)
+26.01.2010
+      * Fixed: Import midi 'replace' broken last fixes. (T356)
+      * Fixed: External midi sync: Wait until first clock after start to start transport, and >= second clock to increment ticks. (T356)
+24.01.2010
+      * Added: Midi sync: Added 'Jack timebase master' checkbox, removed requirement of MusE being tempo map master. (T356)
+      * Added: While on external sync and Jack timebase master, reports correct MusE BBT info to Jack. (Tempo not correct yet). (T356)
+      * Added: Midi import option: Whether to split imported tracks into multiple parts. (T356)
+23.01.2010
+      * Fixed: External midi sync in: MusE transport not rewinding upon reception of start. (T356)
+      * Added: Midi sync: MusE now transmits and receives some MMC commands, and displays some MTC and SMTPE info. (T356)
+        - No transmit MTC or receive MTC syncing yet, just transport control stuff.
+        - Tested OK with Rosegarden and Ardour, but they do not seem to have an option to sync to the input midi clock, 
+           only MTC or internally. Must test when MTC output added to MusE. 
+      * Improved: Midi sync editor window: Shows MMC and MTC activity and works with them now. (T356)
+21.01.2010
+      * Fixed: First tests: External midi sync in works now! Should be rock solid no matter what is thrown at it. (T356)
+        - All changes are labeled "p3.3.25"
+        - Switched to a 'direct drive' method instead of 'calculation of tempo' method.
+          Drift between source of master and slave is non-existant since the incoming midi clocks 
+           drive the midi engine directly. This is at the expense of exact 64th note resolution.
+          At MusE's fixed 24 midi clocks per quarternote, triplet 32nd notes are resolved (32nd note divided by three).
+          MusE's default 'division' (ticks per quarternote) is 384. 384/24 gives a division of 16 MusE 'ticks' per midi clock.
+        - Normally when using the tempo map (external sync is off), device play event times are in frames,
+           because the tempo map provides for that kind of sub-tick frame resolution.
+          But now, during external sync, device play event times are in ticks, not frames. 
+          Hence the compromise between exactness of note times, and master/slave drift.
+        - Tested heavily with a Roland TR-505 which has a variable 'analog' tempo knob.  
+          Combined that with a complete midi song, and other test 'tick' tracks driving external synth KB,
+           was rock solid going 'absolutely nuts' with the tempo knob up to 260BPM, surprisingly good resolution.
+        - TODO: Check safety of 'midiExtSyncTicks = 0' inside audio thread while midi thread is counting it up.
+          Also fix seek operations and check for any more place needing these 'tick'frame' alterations.
+      * Changed: Some more changes for compressed files operations. (T356)
+        - More to be done, but tests OK so far.    
+19.01.2010
+      * Fixed: Saving/loading compressed .gz/.bz2 MusE .med files, + loading compressed .mid/.kar files (save broken, off for now). (T356)
+        - Changed filedialog.cpp:getSaveFileName() and MusE::loadProjectFile1.
+        - Added seperate save file dialog filters in globals.cpp.
+        - Disabled exporting of compressed midi/karaoke files (.mid/.kar) for now because
+           a compressed file is opened as a pipe, and pipes can't seek, resulting in a 
+           corrupted midi file in MidiFile::writeTrack(). 
+18.01.2010
+      * Added: Piano roll and drum editor edit menus: "Select prev/next part". With default hotkeys Alt+Left/Right. (T356) 
+        - This is an easy way to switch parts when multiple part editing in one window (via Ctrl-E or Ctrl-D).
+          And it was absolutely essential, for multiple dedicated controller track editing since there are no notes,
+           and no (other) way to select another part to edit.
+17.01.2010
+      * Feature: MusE now has two mixers, with selectable track type display. (T356)
+        - Changes to .med file were needed. Tested OK so far with old and new song files.
+      * Fixed: Builtin freeverb and TAP reverb ladspa GUIs, or custom user GUIs not showing controls. (T356)
+        - Broken since removal of musewidgetsplugin library months ago.
+          Added PluginWidgetFactory class to handle local creation of controls.
+          (Custom user GUIs must be done by hand since the removal of musewidgetsplugin library).
+      * Fixed: Appearance settings red colour adjustment larger than others. (T356)
+      * Changed: Default controller graph foreground colour from blue to medium orange. (T356)
+        - Avoid clash with blue colour used by left and right markers.
+12.01.2010
+      * Release: 1.0.1 (rj)
+10.01.2010
+      * Fixed: python detection exchanged for script from http://libvirt.org/ (rj)
+09.01.2010
+      * Removed: Disabled watchdog thread. (T356)
+        - Tested OK (normally) without it, although behaviour needs to be tested if audio or midi thread
+           would stop unexpectedly.
+      * Changed/Fixed: Thread priorites: Added command line switches for audio (-P) and midi (-Y). (T356)
+        - Audio (-P) applies to dummy driver only. (Else audio priority is fixed by Jack).   
+        - Also changed default settings so that no two threads have same priority. May fix problem reported
+           by user GB, concerning high midi latency.
+      * Added: Enable/disable LASH command line switch (-L), (if LASH support is compiled in). (T356)
+        - Helps prevent some issues like auto-starting Jack, or automatically routing midi to fluidsynth (observed).
+07.01.2010
+      * Fixed: BUG ID: 2879426: *.med does not save meta event types. (T356)
+        - Changed midievent.cpp MidiEventBase::write(). Now saves value A, B, C and sysex/meta data. Tested OK.  
+      * Fixed: Midi meters now show for each track even if they're all on same device and channel. (T356)
+        - Oversight, long overdue. The meters AND automation control needed to be 'per-track'.
+      * Applied: muse-destdir.patch Scripts and utils packaging fix submitted by Orcan Ogetbil. (T356)
+06.01.2010
+      * Feature: Jack transport enable/disable in Midi Sync settings window. Stores setting per-song. (T356)
+        - Should be Ok to use and test. Needs a bit more work. See jack.cpp and jackaudio.h
+      * Fixed: Speedups of audio pre-fetch especially when moving the cursor around (seeking). (T356)
+23.12.2009:
+      * Added: DeicsOnze2 initial import. (ng)
+      * Fix: deicsonzepreset.cpp for Xml muse 1 API
+20.12.2009:
+      =======================================
+      * 1.0 tagged (rj)
+      =======================================
+19.12.2009:
+      * Feature/Fix: Audio metronome: Send output tracks now selectable in Settings->Metronome. Also fixed bad noises.(T356)
+15.12.2009:
+      * Patch: New patch for 64-bit memory issues, from Daniel Kobras (rj)
+      * Reworked: Output of configure script to point out deprecated stuff and list the interesting stuff (rj)
+      * Fixed: Old bug: WaveTrack muting slow to respond or odd behaviour. (T356)
+        - Removed track mute check in WaveTrack::fetchData(). Was causing 'delayed repeated muting' since the mute check is
+           done at a time when audio segments are fetched which are to played a few seconds into the future.
+          Tested OK so far, playing and bouncing wavetracks. Mute is now quick to respond and does not 'repeat' or 'delay'.
+14.12.2009:
+      * Fixed: Overhauled AudioTrack processing. Fixes noises if multiple output routes exist. Eliminates costly redundant
+                processing of audio tracks, and their effects racks. Waves, groups, inputs, outputs, synths etc. (T356)
+        - Made better use of AudioTrack::outBuffers, as a 'post-effect/pre-volume' caching mechanism if the track has more than one 
+           output route. WaveTrack was already using this scheme, but I moved it up 'higher' and now all tracks benefit from it.
+        - See AudioTrack::copyData() and ::addData(). Most changes there. (Comments included!)
+      * Fixed: Old songs made before recent synth changes were not loading their synths. (T356)
+        - In .med file, added synth 'label' tag to go with existing 'class' tag, to support synths like dssi-vst.
+        - Songs made recently after the changes might not load their synths and will simply have to be re loaded and re-saved.
+07.12.2009:
+      * Fixed: Add Synth popup menu: Show names AND descriptions. Now sorted, too. Also separate MESS, DSSI, VST, and Other. (T356)
+        - Added app.cpp:populateAddSynth() function.
+      * Fixed: Increased buffers for reading xml. Song files with large patchdata from vstis caused crashes (rj)
+      * Fixed: Self inflicted bug with setting inital song loading in general configuration (rj)
+06.12.2009:
+      * Fixed: List popup synths by description. Cleaned up soft synth main list. Added persistent names, descriptions, ver, etc. (T356)
+05.12.2009:
+      * Fixed: ddsi synths: Ticking or crackling when more than one output route path. (T356)
+        - The synths were being run more than once per process cycle, due to multiple out routes eventually calling getData.
+        - ** Work in progress - must also do MESS synths and other track types which should only process once per cycle. 
+      * Feature: SSE support configure build option and SSE enabled dsp routines added. (T356)  
+        - Currently none of the routines are actually used, yet... Borrowed from MusE-2.
+        - They appear to only be enabled for 64-bit CPUs. Investigating why not 32-bit...
+      * Feature: i386 optimized dsp float buffer copy routines. (T356)
+        - Should work on all i386 compatible CPUs (uses asm movsl). Borrowed from MusE-2
+        - I couldn't bear to add yet another unoptimized memcpy usage, so I added this.
+      * Changed: All audio buffers now allocated with 'posix_memalign' instead of 'new'. (T356)
+        - Borrowed from MusE-2.
+03.12.2009:
+      * Fixed: Support for initial vst chunk storage support if available in dssi-vst 
+        requires a patch to dssi-vst.
+      * Fixed: Better cleanup on closing MusE. (T356)
+        - Added Song::cleanupForQuit called from Muse::closeEvent. Disconnect gracefully from LASH before app quit.
+          Clean up memory. Make vst synth processes which were in undo or redo list at close go away.
+02.12.2009:
+      * Fixed: Do not send default midi values back to dssi synths. Let them handle their own default setting mechanisms. (T356)
+        - Also saves a bit of loading time for synths with hundreds of controls. See MidiPort::setMidiDevice(). 
+02.12.2009:
+      * Fixed: dssi: Crashes when loading most vst synths. (T356)
+        - All ports must be connected even if not used.
+          Made sure all audio in/out and control in/out ports are connected,
+           including latency control out port. Test Ok.
+30.11.2009:
+      * Added: Configuration option for vst plugin in-place processing, fixes ladspa vst plugins not working or loud feedback. (T356)
+        - Hmmm, they were working before when I upgraded OS. Now they're not. Extensive testing: It seems this is not MusE's fault.
+        - R.J. reports they weren't working too. Investigating...
+29.11.2009:
+      * Fixed: dssi: Loading of synths with more than 2 out channels. (T356)
+        - Currently only the FIRST TWO channels of the synth will be used.
+        - Tested ok so far with A.D. drumkit.
+28.11.2009:
+      * Fixed: dssi: List only synths found, not effect plugins. (T356)
+        - Does the exact opposite of what dssi-vst does for ladspa plugins,
+           therefore all plugins should be covered - effects will be listed 
+           in ladspa effect dialog, while synths will be listed as synths.
+27.11.2009:
+      * Fixed: dssi: Both native guis and vst guis should open now. Ooooh - pretty! (T356)
+        - ** But still: Keep an eye on your process list and manually kill any 
+           synth instances lying around after exit. For now try to 'politely' 
+           close dssi guis and delete any dssi synth tracks before exiting muse.
+        - Working on gui open-close-reopen-show-hide stuff. Kinda weird esp. with vsts right now...
+26.11.2009:
+      * Fixed: Loading dssi crash bug. Should at least load them now. (T356)
+        - Also some controller functionality via track controllers...
+25.11.2009:
+      * Feature: Dis.. Dis.. Disposable wha? (T356)
+        - dssi support. Work in progress. 
+        - ** VERY IMPORTANT Currently you must manually 'kill' any synth instances lying around after exit !!!
+        - Should work OK for tests and fun...
+22.11.2009:
+      * Added: Support for reading ogg files through libsndfile (rj)
+18.11.2009:
+      * Fixed: Audio and synth tracks not processing when output path ultimately leads nowhere. (T356)
+        - ALL tracks now always animate meters, and process audio 'quietly', and synth tracks
+           process their gui messages, if output path leads nowhere.
+        - This fixes a few problems: For example fluidsynth was not allowing loading of soundfonts.
+          And synths would suddenly 'dump' any backlogged events when processing was turned back on.
+          And during play, when disconnecting and reconnecting the track outputs, the audio would be 
+           out of sync because it was not processed during that time.
+        - See Audio::process1() to understand the changes more. Follow from there to SynthI, SynthIF etc.  
+      * Fixed: Minor issue with port 0 display in track list port column for synths, from previous fix. (T356)  
+17.11.2009:
+      * Changed again: Arranger: Track list: Left click synth track's port column now lets you choose a port. (T356)
+      * Fixed: Do not list synths as instruments in ports/synths settings window. (T356)
+16.11.2009:
+      * Added: Script functionality moved from PianoRoll to song class, available in main menu (under 'Midi') 
+        and drum editor (mg)
+      * Added: 'Add synth' sub-menus now automatically assign the instance to a free midi port. (T356)
+15.11.2009:
+      * Added: Added 'Add synth' sub-menu to main 'Edit menu' and Mixer 'Create' menu. (T356) 
+      * Changed: All audio track types now start with two channels and 0db volume. (Input tracks remain muted as usual). (T356)
+      * Fixed: Organ synth: Drawbar harmonics and sustain midi controllers were not working. (T356)
+        - Applied auto-bias corrections.
+14.11.2009:
+      * Added: DoubleSpeed plugin script for PianoRoll (mg)
+      * Fixed: Disable Python ifdefs (mg)
+13.11.2009:
+      * Feature: Mixer labels: Auto-Font-Size(TM) using Appearance Settings font # 6. Word wrap (only with spaces) supported. (T356)
+        - The mixer labels will try to fit the text, trying font size from font #6 point size down to point size = 5.
+      * Feature: Arranger: Track list: Right-click 'Add ...' now lists soft synths ! (T356)
+      * Feature: Arranger: Track list: Left/right click synth track's output port column now shows synth gui ! (T356)
+      * Changed: Midi track info: Removed redundant track name box, changed label to behave like mixer strip. (T356)
+      * Fixed:   Appearance Settings: Manual entry into font name boxes now works. (T356)
+      * Fixed:   Appearance Settings: Added tooltips to font #0 - #6. Explains which font does what. (T356)
+12.11.2009:
+      * Fixes: Some Python API refcount code added (mg)
+10.11.2009:
+      * Added: Effect disable/enable + add/remove track to Python API (mg)
+09.11.2009:
+      * Feature: Added 'Echo recording to output' button to midi track info panel. (T356)
+        - Turns on or off echoing of incoming record events to output device.
+      * Fixed: Midi tracks not recording when no output device selected. (T356)
+        - Now tracks will record with no output device selected.
+      * Fixed: Problems since increasing number of midi ports from 16 to 32 several months ago. (T356)
+        - Added Xml::parseUInt() and ::uintTag(), utils.cpp:u32bitmap2String() and string2u32bitmap().
+        - Fixed saving and loading of input port mask in med files.
+        - Fixed display of input port mask in track info panel.
+08.11.2009:
+      * Added: First test shot at part managing app in Python (mg)
+      * Added: Python api functions for selected track + import of part file (mg)
+06.11.2009
+      * Fixed: Python configure.ac problems. (T356)
+      * Removed: musewidgetsplugin (QT3 Designer widgets plugin) which may cause CVS build to fail with libtool2. (T356)
+        - Infamous '-o' trick no longer required to build from CVS. Removed until further notice. 
+04.11.2009
+      * Added: Shortcuts to drumeditor + pianoroll: goto current pos, scroll left + right (mg)
+      * Fixed: Added command line switch (-y) for enabling Python control - disabled as default (mg)
+      * Added: Shortcut keys added to pianoroll and drumeditor (mg)
+      * Added: Startup dialog showing 'good to know' info, can be disabled (rj)
+      * Added: Song info dialog, can be used to record song related arbitrary text information (rj)
+      * Changed: the output limiter is now configurale, and by default off (rj)
+      * Fixed: Midi loop recording now honours the transport cycle record mode setting. (T356)
+        - Cycle mode REPLACE: Only record notes in current loop. Erase any previous loop notes from rec stop pos to loop end.
+        - Cycle mode NORMAL: Same as REPLACE, but don't erase any previous loop notes from rec stop pos to loop end.
+        - Cycle mode MIX: Keep all recorded notes from all loops.
+        - Use the transport record mode OVERDUB or REPLACE as usual to either mix with or replace existing track notes.
+      * Fixed: Midi record (incl. new part, looping, part auto-extend) now honours the arranger snap selection. (T356)
+        - Previously the left and right ends of the part would always be 'snapped' to bars, and any new notes recorded 
+           past the end would not snap the part.  
+      * Changed: muse/mpevent.h: Changed MREL list from using audioRTalloc to midiRTalloc. (T356)
+        - This must have been a mistake? midiRTalloc was not even being used anywhere before. The comment lines gave clues. 
+      * Fixed: Multiple copies of wave events appearing in wave parts after resizing part. (T356)
+        - Changed EventList::find() to respect wave or midi. D'oh! Missed this obvious one from changes I made many months ago.
+      * Fixed: Audio loop recording now respects arranger snap setting. (T356)
+        - Previously the left and right ends of the part would always be 'snapped' to bars.
+      * Fixed: Audio recording now respects punchin and punchout points. (T356)  
+      * Fixed: Audio loop recording now works (currently replace mode only). (T356)  
+        - WORK IN PROGRESS: Only overwrite (replace) mode supported. Working on overdub mode...
+        - If recording is started INSIDE the loop points, then allowed to loop, the
+           'zeroth loop' wave contents will be 'shifted' back to the left loop point.
+          This may have to change if mix mode is to be supported. In other words 
+           keep that 'zeroth' portion of wave in place. May change it anyway. 
+02.11.2009
+      * Added: Midi track controller + audio track volume to Python interface (mg)
+28.10.2009
+      * Fixed: No, or badly shifted wave recording, since libsndfile 2008-05-11 (T356)
+        - Fix for recorded waves being shifted ahead by an amount equal to start record position.
+        - Removed _recFile->seek() in AudioTrack::record(). Since libsndfile 2008-05-11, "seeking past 
+           end of file during write" is allowed, which caused problem with the line seeking the record
+           file to an absolute frame which *included* the recording start position.
+25.10.2009
+      * Added: Mute functionality to Python interface (mg)
+      * Fixed: Midi mixerstrip mute update issues (mg)
+      * Fixed: initialization in pandelay ladspa plugin (rj) 
+21.10.2009:
+      * Added: functions for looping to Python interface (mg)
+19.10.2009:
+      * Added: more functions to Python interface: deletePart, set position of locators, get/set song 
+      length, get division, set midi track parameters (mg)
+      * Added: now possible to create and modify parts via Python bridge (mg)
+18.10.2009
+      * Added: backported ladspa plugins doublechorus and pandelay from svn-muse (rj)
+      * Fixed: Mixer was not updating when a midi track's channel was changed. (T356)
+        - Created a new song changed flag SC_MIDI_CHANNEL and used it to only update mixer midi strips,
+           not the whole mixer. Changed AudioMixerApp::songChanged() and ::updateMixer().
+      * Fixed: Mixer was not shrinking enough when a track was removed, leaving space between strips. (T356)
+        - Added a couple of lines to AudioMixerApp::updateMixer() STRIP_REMOVED section.
+      * Fixed: Bug with reading soundfonts from song dir fixed (rj)
+17.10.2009
+      * Examples: added some example scripts, DoNothing and RemoveShortEvents (currently requires PyQt4) (rj)
+      * Added: more tags to plugin format in pianoroll, see readme in dist: share/scripts (rj)
+      * Added: Updates to Python API, now possible to modify part data. Needs a lot of testing (mg)
+16.10.2009
+      * Added: Added a few functions to Python remote API (start/stop playback + location queries)
+      * Feature: Each drum instrument listed in the drum map now has a playback 'volume' setting. (T356)
+        - Currently it affects playback only. I am looking to maybe add record level, too.
+      * Changed: Default drum map velocity level 3 (110) and 4 (127), now 127, 110. (T356)
+        - To allow easy (no key hold) drawing of default 110 velocity notes.
+          (Hold shift = 127, ctl= 90, shift+ctl = 70)
+      * Fixed: Drum editor controller graphs now align perfectly with editor canvas. (T356)
+        - Changed DrumEdit::newCanvasWidth().
+        - Tested OK with various appearance themes, and various vertical splitter positions.
+      * Fixed: Drum map length, velocity level, and volume columns rapid mid-/right- clicks causing left double-clicks. (T356)
+        - Now the columns can be quickly mid and right clicked (decrement/increment).
+      * Fixed: Fluidsynth now realizes that a soundfont was located in the song-dir and then omitts 
+        the path in the configuration data. (rj)
+      * Changed: Changed the format of the datafile for the automation option in the pianoroll
+        Mathias, we can wrestle about it later ;-)   (rj)
+15.10.2009
+      * Feature: First version of MusE remote Python control (mg)
+      * Fixed: Drum canvas 'select' functions not updating, can't copy/cut etc. (T356)
+        - Added updateSelection() to the end of DrumCanvas::cmd(). Tested OK.
+12.10.2009
+      * Feature: External scripting functionality added via PianoRoll menu: (mg)
+         PianoRoll scans INSTPREFIX/share/muse/scripts and ~/.muse/scripts for executables, which modify part 
+         data via data stored in temporary file
+
+25.08.2009
+      * Proposal: new default colors for various stuff (rj)
+12.08.2009
+      * Fixed: bug 2811156, soft synth and marker window no longer appear when hidden for XFCE window manager (rj)
+15.07.2009
+      * Patch: from bug 2819312 (by Gerardo Exequiel Pozzi) added. Allows muse to launch with never glibc. The fix is
+        perhaps not fully understood but it looks harmless. (rj)
+09.07.2009
+      * Changed: Track info program, vol, and pan spinboxes now lose focus with one enter press instead of two. (T356)
+05.07.2009
+      * Fixed: Small fix on behalf of T356, Jack should not be started if running -a (rj)
+      * Fixed: Help menu -> Report a Bug: Set address to current muse org bug address. (T356)
+01.07.2009
+      * Fixed: Dropdown menus in transport no longer grab focus, make space start/stop work again (rj)
+      * Fixed: Dropdown in Mastertrack editor no longer grabs focus (rj)
+      * Feature: Added denormal protection, by default on, can be turned off in global config (rj)
+25.06.2009
+      * Fixed: Recording of midi sysex was not working. (T356)
+        - My fault since recent midi sync changes. Fixed the last few lines in alsaProcessMidiInput().
+      * Fixed: Segfault when certain movements are done in track list. (T356)
+        - Added valid track check to RESIZE section of TList::mouseMoveEvent(), 
+           and a few other places.
+23.06.2009
+      * Testing: A fix for some Jack-2 net problems...  (T356)
+        - Added missing break statements, and JackTransportNetStarting detection 
+           (hard-coded as '4' for now so that muse will build with Jack 1 and 2 - we need 
+           config detection of Jack version!) to processSync(), and JackAudioDevice::getState().
+21.06.2009
+      * Feature: Added Jack freewheel mode. (T356)
+        - Dramatically speeds up bounce to file and bounce to track operations.
+          With freewheel enabled, you don't have to wait for Muse to play the song 
+           at normal speed while bouncing - it goes as fast as possible.
+        - Added configuration option for it. See 'Global Settings -> Audio'.
+20.06.2009
+      =======================================
+      * 1.0rc3 tagged (rj)
+      =======================================
+      * Feature: Jack transport master functionality added. (T356)
+        - Allows other Jack client apps to properly disply Muse's current bar, beat, and tick.
+        - Especially useful for songs with tempo and time signature changes.
+        - It is activated / deactivated by clicking on Muse's transport 'Master', 
+           or Muse's graphic Mastertrack window 'Enable'.
+17.06.2009
+      * Fixed: Segfault after creating simpledrums instance, then adding a midi track. (T356)
+        - Return non zero in SimpleSynth::getPatchName().
+15.06.2009
+      * Removed: Some code in jack driver which may cause shutdowns or static noise with Jack version 1 (T356)
+        - Tested several hours here, no shutdowns or sudden static noise. Thanks to the Jack team for that one...
+13.06.2009
+      * Fixed: New midi right-click popup menu 'add/set event' and 'erase event' not working for drum controllers. (T356)
+        - Also, on 'add/set', added check and ignore if an existing event value is already equal. 
+      * Fixed: Midi track info vol, pan, prog 'Rec' buttons were allowing duplicate events. (T356)
+        - Added check for existing event in Song::recordEvent().
+        - Also added check and ignore if event value is already equal.
+10.06.2009
+      * Fixed: Link error concerning libmidiedit.a and CtrlEdit.a (T356)
+        - Somehow the list of link libraries was out of order. Reordered, tested OK.
+05.06.2009
+      * Fixed: Users in some locales reported audio automation save/load corruption. (T356)
+        - Changed CtrlList::read() to use QString and QLocale instead of strtol() and strtod().
+        - Checked: Other places using QString::toDouble() work OK because QString will fallback 
+           to 'C' locale if formatting using current locale fails. (Hmm... But is it a speed hit?)
+      * Fixed: When linking, get errors concerning uuid functions not found. (T356)
+        - Added a section in configure.ac to test for uuid.h and libuuid.
+        - Added uuid lib to list of linked libs.
+      * Fixed: Midi port controller values not erased upon song load. (T356)
+        - There were leftover ghost values in the controller graphs between song loads.
+        - Added MidiCtrlValListList::clearDelete(), called from Song::clear().
+      * Added: Right-click automation popup menu to all midi controller knobs/sliders. (T356)
+        - Contains add/set event, and erase event.
+        - When activated by the muse mixer midi controls, it 'prefers' selected parts on the track
+           over unselected parts, otherwise it chooses the first part found. If no part is found, 
+           it creates a new one to contain the event.
+        - When activated by pianoroll or drum editor controller graph, it uses the currently 
+           selected part (within the editor).
+        - Adding 'previous event', 'next event', 'erase range' and 'clear automation', just like
+           the audio automation popup menu, will take more time. Not implemented yet.
+      * Disabled: Midi mixer strip automation type button. (T356)
+        - There is no midi automation recording mechanism (yet). Disabled to avoid confusion with users.
+      * Added: Some new instrument .idf files submitted by MST (Michael). (T356) 
+        - Akai SG01v, Korg MS2000R, Korg X5DR, Korg X50, Waldorf MicroQ.
+02.06.2009
+      * Applied: Some patches by Mandriva packagers. (T356)
+        - muse-1.0-fix-str-fmt.patch for deicsonze printf fix.
+        - muse-1.0-linkage.patch fixes compiler hang up at deicsonze.cpp.
+01.06.2009
+      * Fixed: Instrument editor 'Save as' was not working right. (T356)
+        - Was overwriting existing instrument.
+        - Now prompts for new instrument name.
+      * Added text in ctrl view to explain how to add controller values (rj)
+
+24.05.2009
+      * Fixed: Missing uuid header in two files. (T356)
+        - My fault. Added include uuid/uuid.h to songfile.cpp and pcanvas.cpp.
+      * Fixed: Bounce to track: Wrong message "Select one audio output track", to "Select one target wave track". (T356)
+        - My fault. Message is displayed when there is one output and one or more wave tracks, and the user has clicked 
+           on the output but not a track, too.
+      * Added: Start 'Wave editor' edit menu item, with configurable shortcut key. (T356)
+        - This will handle mutiple wave part editing. The existing right-click wave part popup menu
+           'wave edit' item did that too, but now has been reverted back to opening a single 
+           wavepart only, just like midi parts. 
+      * Streamlined: All reading of 'part' xml is now done by a new routine. (T356)
+        - Replaced new PartCanvas::readClone(), and existing Part::read(), with standalone readXmlPart(),
+           in order to block creation of parts with mis-matched type, which don't belong on a track.
+        - Allowed mixed part .mpt files (midi and wave), and made a new clipboard type 'text/mixedpart'.
+        - Mixed part files can be dragged, imported or pasted to either a wave or midi track, and only the 
+           relevant parts will be created. 
+        - Added warning dialog showing how many, of how many total, parts couldn't be created.
+        - Added a parameter to Event::write() and EventBase::write() to force full wave file paths to be stored.
+          Used for copying, pasting, dragging, importing, exporting parts, but not for the song file itself.
+       * Added: Right-click wave part popup menu now has 'export', just like midi parts. (T356)
+        - As mentioned above, the full wave path is stored so there's minimum confusion when re-loading 
+           the export, unless of course the file moved or was deleted etc.
+       * Fixed: Some issues with clones, controller events, and port controller values. (T356)
+        - It means "What you see on the controller graph is what you get, when you move the play cursor."
+          Port controller values are used when moving the cursor, they make the knobs move and send
+           values to the midi port. However, during play, they are not used, the song's controller events
+           themselves are used. Synchronizing these two mechanisms is what this is all about.
+          Fortunately, during play, "What you see on the controller graph" is ALWAYS correct, and is sent 
+           to the midi port. 
+        - TODO: Not quite done yet. Some functions may not update port controller values properly still,
+           like splitting or gluing clone parts.
+06.05.2009
+      =======================================
+      * 1.0rc2 tagged (rj)
+      =======================================
+
+02.05.2009
+      * Feature: Right-click popup menu on a clone part now has "Select N clones", where N is number of clones. (T356)
+        - Major addition: Part "clone chaining system". (See part.cpp for new functions). Speeds up searches for clones.
+      * Feature: Added 'Paste clone' to arranger edit menu. Pastes clones of copied parts. (T356)
+        - 'Paste' will behave as always, only making a fresh copy of non-clone parts, while cloning clone parts.
+        - 'Paste clone' will always make a clone no matter if the parts are clones or non-clones.
+      * Feature: Added 'Paste to track' and 'Paste clone to track' to arranger edit menu. (T356)
+        - 'Paste' (and 'Paste clone') now attempt to paste to the original track(s) which the parts belonged to, 
+           or if the original track has been deleted, then the current track. 
+          'Paste to track' and 'Paste clone to track' paste all copied parts to the currently selected track, 
+           which was the previous behaviour of 'Paste'.
+        - Much work went into making sure that all scenarios work with these features, like copy/paste, drag/drop, 
+           drag/drop .mpt part files, drag/drop between different instances of muse etc.
+      * Fixed: Importing or dragging midi part file (.mpt) into muse now supports multiple parts in the file. (T356)
+        - Changed MusE::importPartToTrack().  
+      * Fixed: Midi record into existing part past part end, in 'Replace' record mode, works now. (T356)
+        - Finished an erase events 'TODO' block in Song::cmdAddRecordedEvents.
+      * Fixed: Midi record into existing part, past part end, was decreasing part aref count, causing de-clone of clones. (T356)
+        - Removed extra "part->events()->incARef(-1)" from Song::cmdAddRecordedEvents().
+      * Changed: Number of midi ports from 16 to 32. (T356)     
+      * Added: Muse application desktop file, and added installation of it plus the muse icon, upon 'make install'. (T356)
+        - Desktop file submitted by Orcan Ogetbil.
+        - Note if muse is installed to /usr/local, the desktop file might not find the icon.
+      * Fixed: "-mcpu= is deprecated" compiler warnings. (T356)
+        - Changed configure.ac to use -mtune and -march.
+      * Speedups: Some heartBeat routines (such as Meter) were constantly drawing, wasting time and causing flicker. (T356)
+        - Also fixed Track Info midi detect light, and Midi Sync lights.
+      * Fixed: Midi strip vu meters now have a peak indicator. (T356)
+      * Fixed: Audio mixer strips now update when config minimum meter/slider value changed. (T356)
+        - Also fixed blocky 'aliased' drawing at low signals / low minimum meter settings.
+        - Changed Track::_meter and ::_peak from ints to doubles for more accuracy, eliminate 'false' draw update triggers.
+      * Added: Configurable shortcut key: "Transport: Goto start". Default 'W' key (as in reWind to start). (T356)
+      * Added: Appearance configuration button: Clear background picture. (T356)
+        - Also fixed Appearance::apply() to clear the string if <none> selected.
+        - Also fixed Arranger::configChanged() to set canvas null background QPixmap.
+        - This means clearing the filename in the 'select picture' dialog also works now. 
+      * Changed: Selected cloned parts now draw (inverted) dashed border, just like unselected parts. (T356)
+      * Changed: Part drag-clone key from Shift-Ctrl back to Alt. (T356)
+        - My fault. Was changed to Shift-Ctrl, but Ctrl is for selecting all items in a row or limiting movement to x or y. 
+        - Still not a good thing. Some desktops even reserve Alt, Shift-Alt etc. for window move, snap etc.
+        - TODO: Must find a way to override desktop setting. Without Alt, we don't have enough keys to work with!
+          Don't want user to have to disable setting.
+      * Cleanups: Moved some methods outside of Part and Track classes which I had put inside them. (T356)
+        - Methods like addPortCtrlEvents() deletePortCtrlEvents() etc.
+      * Changed: Muse wants qt >= 3.2, but some .ui files had version 3.3. (T356)
+        - Changed editinstrumentbase, editgainbase, aboutbox, configmidifilebase, gensetbase, midisync, 
+           fluidsynthguibase, and vamguibase .ui files.
+      * Fixed: Midi Track info panel was allowing track name change to an already existing name. (T356)
+        - Fixed Arranger::iNameChanged() to warn. Changing the name in the arranger Track List already warns OK.
+      * Fixed: Crash or bizarre behaviour when undoing a track rename operation. (T356)
+        - Replaced default simple Track class assignment operator with custom method. Added a flag parameter to 
+           Track::clone and Track copy constructors to indicate partlist is simply assigned, not parts cloned. 
+           Also removed the lines reassigning each part's track (!). Can get away with this since track rename 
+           is the only operation to use that, but something better would be needed if more 'normal' behaviour 
+           was needed in copy constructor and assignment operator !
+05.04.2009
+      * Fixed: Arranger part cloning works now! (Hold shift-ctrl while moving part - note dashed border on cloned parts). (T356)
+        - In Song::cmdChangePart() do not call "oldPart->events()->incARef(-1)" if new part is clone of old part,
+           (that is, old/new parts' eventlists point to same eventlist).
+        - Changed from 'alt' to 'Shift-Ctrl' button combo to activate cloning in Canvas::viewMousePressEvent().
+          Alt is reserved for moving the whole window (on my machine), so most people probably never knew about cloning? 
+        - This also fixes a reference count problem when renaming a part, ref count was being dec'd past 0. 
+          Quite possibly fixes some other issues, too. Testing...
+      * Fixed: Transport window was disappearing by itself. (T356)
+        - Removed WStyle_Tool from Transport constructor. Seems to test Ok now.
+        - Gave it a caption "Muse: Transport", to appear on task bar.
+      * Fixed: Big time display now shows MTC minutes, seconds, frames, and subframes. (T356)
+      * Fixed: Wave editor MTC cursor time readout was not right. (T356)
+        - Use samplepos to set pos2 value in WaveEdit::setTime().
+03.04.2009
+      * Followup: Track info panel program, volume, and pan were not allowing editing values. (T356)
+        - Fixed the track info heartBeat function.
+      * Followup: Some more changes to respect MidiDevice open flags, set in midi config window. (T356)
+        - Strangely, midi config 'write enable' lights still weren't stopping events from being played, 
+           even though the port was clearly unsubscribed successfully for writing (!) 
+          Also, strangely, only if Jack Midi was disabled, some device putEvent() error messages were appearing.
+          I expected the messages to ALWAYS occur but it didn't happen, even though events were always played. 
+        - Added MidiDevice::_writeEnable and ::_readEnable, set when the device is opened or closed. 
+        - Changed the various ::putEvent methods to respect _writeEnable. (_readEnable not used yet, because
+           port unsubscribtion for reading IS working - events stop arriving).
+      * Added: Instrument definition file for playing to an Emu 4MBGSMT SoundFont. (T356)
+01.04.2009
+      * Fixed: Midi config window: Clicking on green in/out enable lights was not actually dis/enabling in/out. (T356)
+        - As initiated from MPConfig::rbClicked(), MidiAlsaDevice::close() was seeing the NEW flags, not the old.
+          So, in MidiAlsaDevice::close(), removed _openFlags check, and added snd_seq_get_port_subscription() check.
+        - Tested Ok disabling/enabling ins/outs, and clearing/setting port's device.
+      * Fixed: Muse was not storing midi port 'openFlags' in the song files. (T356)
+        - Muse could read the old 'record' flag and the new 'openFlags' tags, but only stored the 
+           old 'record' tag (well, it was actually storing rwFlags by mistake).
+        - Added the necessary tag to file write. (Related to the fix above - now it stores the port in/out enable).
+01.04.2009
+      * Fixed: Compile problem with muse widgets plugin "undefined reference to `main'". (T356)
+          - Added -c to musewidgetsplugin_so_CPPFLAGS in muse/widgets/Makefile.am
+          - Re-ran automake, configure, built, tested ok.
+          - To be tested by users...
+      * Fixed: Compile error: "editctrlbase.cpp:53: error: invalid use of incomplete type 'struct PosEdit'" (T356)
+          - Added a <customwidget> section to editctrlbase.ui
+          - To be tested by users...
+31.03.2009
+      * Feature: Midi file export: Configuration options added for 2 or 4 byte time signatures + note off optimizations. (T356)
+        - For 4 byte timesigs: Add fixed "metronome" value of 24 (once per quarter-note), and "32nd notes per quarter-note" value of 8. 
+        - For note off optimizations: Replace note offs with zero velocity note ons.   
+      * Fixed: Midi track info panel now updates when external changes occur, such as keyboard program changes. (T356)
+        - Changed track info window from songChanged based updates to periodic heartBeatTimer based updates.
+      * Feature: Added midi input detect indicator to track info panel. (T356)
+        - Detects all note on-off, controller, aftertouch, program change, and pitchbend (but not sysex or realtime) 
+           events on the selected channels, on the selected midi ports.  
+      * Fixed: Midi program adjustment controls now respond when external program changes occur. (T356)    
+        - Added a section to handle ME_PROGRAM in MidiPort::sendEvent(), so that visual controls can update,
+           such as trackinfo 'program' , and pianoroll 'program' controller adjustment knob.
+      * Fixed: Some issues with 'Follow Song' setting and position cursor position/visibility. (T356)
+        - Added 'xorg' in ppos calculations in Canvas::setPos() (and others like WaveView, but that still isn't quite right.)
+        - For windows which have an appreciable x origin (space at the left of the contents), the play cursor was 
+           too far right or not visible sometimes, especialy with large horizontal zoom, particularly the arranger.
+          With 'Follow Continuous', the play cursor should now stay about in the middle of the windows. 
+          With 'Follow Page', the view should now more or less always move in full 'pages'. 
+27.03.2009
+      * Fixed: Track info 'instrument patch' list box was not correct when selecting another track with unknown patch. (T356)
+        - Broken last fixes.
+      * Improved: Support for & < > \ " characters in xml files. (T356)
+        - Fixed xml.cpp
+        - Many places in muse can now use them (ex. track name, instrument names/patches/controllers etc.)
+        - TODO: Writing: Must still check for places which manually use Xml::nput, put etc, but at least muse 
+           should now read them all without trouble.
+      * Fixed: Instrument Editor was still asking to save sometimes even if user clicked save already. (T356)
+        - Call instrumentNameReturn() patchNameReturn() and ctrlNameReturn() from various places, to force update.
+      * Feature: Redesigned Midi Sync Editor and sync system. To allow multiple inputs/outputs, and more. (T356)
+        - See tooltips or click on What's This to see detailed explanations of each item.
+        - TODO: Only realtime MC events are tested at the moment. MMC and MTC are not tested, or not working yet. 
+        - TODO: Fix midi sync clock input. Observed problems: wandering, even reversing(!) song cursor time.
+          Can be stored in .med file that way (tempomap->fix is negative number!) making a bad file which won't play.
+12.03.2009
+      * Fixed: Global configuration dialog 'Displayed Resolution', and added 'Midi Resolution' boxes. (T356) 
+        - Separate midi/gui configurations were allowed, but not implemented. 
+        - TODO: Now make the 'Displayed Resolution' setting actually do something.
+          The 'Midi Resolution' currently sets BOTH what should be separated into midi and gui.
+          Only config.division is used throughout muse, not config.guiDivision.
+          Also, now that these settings are working, they reveal some issues with drawing, such as
+           not enough pianoroll zoom-out ability with high resolution.
+      * Improved: Midi Clock output. Was improper, causing external devices to misbehave. (T356)
+        - Changed MidiSeq::processTimerTick().
+        - Tested: With RTC resolution at 8192, the target device slowly drifted out of phase with muse after 
+          about 20 bars. With RTC resolution at 1024 it was actually more stable (100 bars or more), despite 
+          more clock jitter.
+          Used an equalization scheme to balance the time out. Must test if stability improves without this scheme. 
+          MidiSeq::processTimerTick() still needs some tweaking. 
+        - You may see severe phase difference if moving the cursor around and playing. Try playing from the song start.  
+19.02.2009
+      * Patch: Patch to find best available ALSA timer. (T356)
+        - Submitted by Pedro Lopez-Cabanillas. Patch was named "muse_alsatimer_2nd.patch".
+        - "This patch adds selection logic to ALSA timer initialization, trying to find 
+            the best available ALSA timer (a non slave timer with lowest resolution).
+           Currently muse uses only the ALSA system timer, even when the system has an 
+           ALSA RTC or ALSA HPET drivers available, which are probably better for many users."
+      * Patch: Patches for printf%zd/size_t, and grepMidi/gcc4.4 issues, and fix some compiler warnings. (T356)
+        - Submitted by Orcan Ogetbil.
+        - Patches were named muse-size_t.patch, muse-gcc44.patch, and muse-fix-some-compilation-warnings.patch
+      * Fixed: Some more issues with manipulating drum tracks and underlying controller events. (T356)
+        - Changing a drum track's output port, (and allowing muse to change the whole drum map),
+           was not changing existing port controller values.
+        - Also changing a track from 'midi' <-> 'drum' was not changing the port controller values properly.   
+        - NOTE: I still observed occasional 'ghost' midi port controller values. Tracking this issue...
+      * Fixed: Seek or Init Instrument with XG instrument caused double loading of controller init values. (T356) 
+        - Moved controller init code from MidiPort::sendGm/XgOn() to a new MidiPort::sendGm/Gs/XgInitValues() 
+           and changed Audio::initDevices() to call them.
+      * Added: 'Value' readout on menu toolbar (beside 'Cursor' readout), in Drum Editor. (T356)
+        - Just like pianoroll, except it only shows controller values. 
+        - Now you can read the values you are drawing on the Drum Editor controller graph.
+      * Fixed: Some issues with configuration, and appearance window. (T356)
+        - Muse now remembers configured 'selected track foreground/background' colours. 
+        - Added "Midi Editor -> controller graph" colour configuration option (default navy blue).
+        - Fixed Arranger and Style/Fonts windows not showing current values.
+      * Fixed: Segfault with Appearance configured to show events, with a part tick > 0 on part canvas. (T356)
+        - Added limit checks on from/to variables in PartCanvas::drawItem().
+      * Fixed: Midi controller graphs were displaying 'quantization' vertical lines instead of 'snap' lines. (T356)
+        - Changed CtrlCanvas::draw() to use raster instead of quant value.
+        - Also changed gray background colour to darkGray, so 'major' snap lines can be seen.
+      * Added: Send 'null' midi controller parameters after each RPN/NRPN controler event. (T356)
+        - Symptom: After muse sends any RPN/NRPN controller event, operating the 'data' (MSB/LSB) 
+           midi controllers affects that RPN/NRPN controller.
+        - Cause: The RPN/NRPN parameters are still active, open to any subsequent data adjustments.
+        - Cure: Send 'null' parameters after each RPN/NRPN event, so that subsequent data adjustments
+           are sent there instead.
+        - Added adjustable 'null' parameter numbers to the instrument editor. Typically they should 
+           be '127/127', but they are adjustable (select an unused controller number) if desired.
+          They can also be turned off, if desired, by selecting 'off/off', so that muse will NOT send
+           them. Turning them off is useful for instruments which do not use RPN/NRPN controllers.
+      * Changed: GS/XG instrument patches high banks from 18 to 128, 17 to 127, and 5 to 65. (T356)
+        - Was it a typo? XG specifications say high banks should be 128, 127, 65 etc.
+        - Also, in instrument editor, reorganized XG Drum patches into Drum Kits and Sound FX.
+        - TODO: Other instruments may have to be changed, too.
+      * Fixed: Track info 'Rec' button: If new part was created, it was too short even to see. (T356)
+        - Changed Song::recordEvent to round (tick + 1) up one bar.
+        - Added separate record buttons for program (and bank), volume, and pan.
+18.02.2009
+      * Added: Missing midi program controller to pianoroll/drum edit controller graph and adjustment knob. (T356)
+        - Since the range is limited to 1-128, this only edits the program byte, NOT the program MSB or LSB!
+        - Since only the program byte is edited, adding new values to the graph uses the CURRENT 
+           program MSB and LSB, as shown in the track info pane (H-Bank/L-Bank). 
+           If the current program is 'unknown' (all off), then the graph uses MSB=off, LSB=off if the song type 
+            is GM, and MSB=1, LSB=1 if not.  
+        - I considered using the 'previous value' on the graph for the MSB/LSB, but then there would be 
+           no way to quickly set the MSB/LSB when adding new values to the graph.
+        - The only other way is to draw on the graph, and then use the midi event list editor to change 
+           the program MSB/LSB values.
+        - TODO: Fix the track info H-Bank/L-Bank/Program behaviour. Do not allow program to be 'off' 
+           if H-Bank/L-Bank are not 'off'.
+      * Changed: Instrument editor behaviour. Allow a 'user' instrument directory PLUS the 'built-in' directory. (T356)
+        - Muse now looks first in the MUSEINSTRUMENTS directory (default MUSEHOME/muse_instruments, where MUSEHOME  
+           is default HOME/), then looks in the 'built-in' instrument directory (/usr/share/muse etc.)
+        - Instruments found in the user directory OVERRIDE instruments with the SAME NAME in the 'built-in' directory.
+        - This allows users to quickly experiment with existing instruments while keeping the same instrument name.
+        - TODO: add a 'Delete' button to the instrument editor.
+      * Added: Pitch bend sensitivity controller to fluidsynth. (T356) 
+      * Fixed: Organ synth: Volume not working. (T356)
+        - There is no volume gui control to return proper min/max values.
+        - Added a trap for CTRL_VOLUME in Organ::getControllerInfo() and
+           set min/max to 0/127.
+      * TODO: Fix some broken VAM synth midi controllers with improper range. (T356)     
+09.02.2009
+      * Fixed: Drum map: Grey vertical lines not proper when map header rearranged. (T356)
+        - Used header->mapToSection when drawing grey vertical lines in dlist.cpp.
+08.02.2009
+      * Fixed: Drum map - Changing ANote, Channel, Port now updates controller graph and knob. (T356)
+        - Changing ANote, Channel, or Port of a drum map item now updates the controller graph 
+           and adjustment knob. Useful for XG/GS drum controllers.
+        - TODO: Fix 'Undo' changing ANote, Channel, Port.
+      * Fixed: Drum map - List item drag and drop works properly now. (T356)
+        - Was not manipulating events properly, although port controller values were still OK.
+          Useful for XG/GS drum controllers.
+        - TODO: Fix 'Undo' of drag and drop.
+      * Changed: All calls to some new message sending routines with direct calls. (T356)
+        - Replaced all calls to msgSetTrackOutChannel, msgSetTrackOutPort, msgRemapPortDrumCtlEvents,
+           and msgChangeAllPortDrumCtrlEvents, with direct calls (song->remapPortDrumCtlEvents etc.),
+           bracketed by audio->msgIdle(true) and audio->msgIdle(false).
+        - For complex operations, 'msgIdle' technique seems to be preferred over sending messages.
+        - Tested such operations while in stop mode, and while playing. Tested OK.
+06.02.2009
+      * Changed: Hard coded LADSPA paths in plugin.cpp and ssplugin.cpp to include /usr/lib64/ladspa  
+           and /usr/local/lib64/ladspa. (T356)
+        - Suggested by Orcan Ogetbil    
+        - Note that the environment variable LADSPA_PATH still overrides these hard-coded paths.
+06.02.2009
+      * Patch applied: Removes duplicate implementation of fast_log*() functions in ssplugin.h (T356)
+        - Submitted by Orcan Ogetbil 
+05.02.2009
+      =======================================
+      * 1.0rc1 tagged (rj)
+      =======================================
+04.02.2009
+      * Fixed: Track info panel 'Rec' button not changing existing values on controller graph. (T356)
+        - Name changes: MidiCtrlValList::add, ::del, ::find to ::addMCtlVal, ::delMCtlVal, ::findMCtlVal 
+           to make it easier to spot all usages of them.
+        - Simple fix in MidiCtrlValList::addMCtlVal: Return false if the value is already found for the part.
+        - TODO: It takes three 'undos' to undo the 'Rec' button push. It is because prog, vol, and pan
+           are changed. This should be unified into one undo...
+
+01.02.2009
+      * Fixed: Compile error on 64-bit systems, in audiotrack.cpp at cacheJackRouteNames(). (T356)
+        - Changed from unsigned int pair key, which required pointer conversion, to AudioTrack* pair key. 
+        - Test OK (on my 32-bit system). ** Need 64-bit users to test it. **
+      * Fixed: Segfault when playing a note in a drum map, when the note's port says 'none'. (T356)
+        - Added a line in the 'don't echo controller changes back to software synthesizer' block of
+           Audio::processMidi(), to check valid device.
+      * Fixed: Missing or stuck notes or events on recording (or rec-armed only) midi track. (T356)
+        - Symptom: Playing live (rec-armed only), or recording, on a midi track gives stuck or 
+           missing notes and other events. Very annoying bug!
+        - Cause: A single list was used for recording midi events, while muse was also reading from that list.
+        - Employed a 'flipping' two-list technique for MidiDevice::recordEvents().
+        - In Audio::processMidi(), process one list while MidiDevice::recordEvent() writes to the other.
+      * Fixed: Manipulating controller events in midi track parts was not changing midi port controller values. (T356)
+        - Symptom: Change a part's midi controller events, or move or delete a part, or delete a track, then the underlying
+           midi port's controller values are not altered, leading to 'phantom' or 'ghost', or duplicate controller values,
+           even where there is no part or no track, or no controller values where there should be !
+        - Oops, how did this major bug go unnoticed so long?...   
+        - Major rewrite: Created a struct MidiCtrlVal{int val, Part* part}, and changed class MidiCtrlValList from
+           std::map<int, int>  to  std::multimap<int, MidiCtrlVal>
+          Changed MidiCtrlValList::add(int tick, int value) to MidiCtrlValList::add(int tick, int value, Part* part),
+           and MidiCtrlValList::del(int tick) to MidiCtrlValList::del(int tick, Part* part),
+           and added MidiCtrlValList::find(int tick, Part* part).
+          Changed Song::addEvent(), Song::changeEvent(), Song::deleteEvent(), Song::addPart(), Song::changePart(), 
+           Song::removePart(), Song::insertTrack2(), and Song::removeTrack2() to make sure port controller values 
+           are added/removed properly.
+          Changed a few other things to make it all work. 
+          Reasons: The Part* member was added to each controller value item in the list, so that the system can 
+           know exactly which part was responsible for putting a value in the list.
+          This helps when we have overlapping controller values from events of different parts on the same port and the same channel - 
+           if one of the parts is deleted or moved, the overlapping values from the events of the other part are NOT disturbed
+           within the port's controller value list. 
+          The list was changed from 'map' to 'multimap' to accommodate the multiple values from events of different parts.
+         - NOTE: When there are overlapping values from events of different parts, the system will arbitrarily choose the
+           first value it finds at a given time. I considered 'mixing' the overlapping values together
+           (by averaging, or maybe highest/lowest value), but I felt it would just cause more confusion for the user.
+          Therefore it is up to the user to be aware of overlapping controller events and deal with them.
+          If you are looking at a controller graph and it shows a particular value at some time, but the 
+           midi knobs/sliders and actual midi output does NOT correspond to what you are seeing, then 
+           most likely ANOTHER part on the same port and channel has an event at that same time, and that 
+           event's value is likely the one that is being used by the system.
+      * Fixed: Changing a midi track's out port or channel was not updating the ports' controller values. (T356)
+        - Changed MidiTrack::setOutPort() and MidiTrack::setOutChannel() calls to new MidiTrack::setOutPortAndUpdate() 
+           and MidiTrack::setOutChanAndUpdate(), which make sure the port's controller value list is properly updated.
+        - Part of the larger fixes above.   
+      * Fixed: Midi adjustment knob on controller canvas was not working after moving the part to another track. (T356)
+        - Added some code to CtrlCanvas::songChanged() to set curPart and curTrack and update the knob,
+           upon SC_PART_MODIFIED.
+      * Fixed: Clear midi input transforms when song cleared. Update transform dialog when song changed. (T356)
+        - Symptom: Repeated loading of songs causes duplication of midi transforms, causing .med song files to grow big !
+        - Added clearMidiInputTransforms() to midiitransform.cpp, called by Song::clear().
+        - Added updatePresetList() and slot songChanged() to MidiInputTransformDialog, triggered by Song::songChanged.
+        - Added some code to readMidiInputTransform() to **auto-eliminate** duplicate transforms in existing .med files.
+        - Still some 'quirkiness' with the dialog buttons, but it works better now.
+        - ALSO: Applied those same fixes to midi transforms and the midi transform dialog.
+      * Fixed: Notes not recorded to track for a drum map 'instrument item' having non-default (track) port. (T356)
+        - Changed to drumRecEvent.setPort(port) in 'Track::DRUM' section of 'if(recording)' section of Audio::processMidi()
+           so that buildMidiEventList() would accept the notes.
+      * Fixed: Removed jack midi port names from audio in/out port lists. (T356)
+        - Added JACK_DEFAULT_AUDIO_TYPE to jack_get_ports calls in JackAudioDevice::inputPorts and ::outputPorts.
+      * Fixed: Notes were being mixed up when switching a track type between midi and drum. (T356)
+        - Changed to drumMap[pitch].enote in 'Drum -> Midi' section of TList::classesPopupMenu().
+      * Completed: Moving multiple events from multiple parts when editing in pianoroll or drum editor. (T356)
+        - Work had begun several commits ago. Completed.
+        - Now you can select and move multiple events from different parts in the editors.
+      * Feature: When editing multiple parts in the pianoroll or drum editor, controller graphs are now overlaid! (T356)
+        - When you are editing more than one part at a time in the editors, the controller graph will overlay
+           all of the graphs together!
+        - The currently selected part will show its controller as normal blue columns, as before, but the other 
+           unselected parts will draw their controllers as a gray 'ghost' outline on top.
+        - TODO: Add menu items, hot keys etc. to cycle through each part (in case there are no notes to select in a part!)
+      * Improved: Support for GS/XG midi drum controllers. (T356)
+        - Added MidiPort::drumController(). Tells if an event is a drum controller event, according to the port's instrument.
+          Does it by looking up the event in the instrument's controller list.
+          Would prefer a 'marker flag', eg use the event 'dataA' high bit to mark as drum controller event, but it's too risky!
+          Used MidiPort::drumController() a dozen or so places where drum controller events needed remapping/manipulation etc.
+          May be a speed hit with many/large controller graphs? Test further...
+        - Added code to update port controller values when changing drum map ANote, channel, or port.
+        - KNOWN BUGS: Still a few loose ends to tie up: Port controller values (but not track events) may not be correct when: 
+           'Swapping' (by dragging) items in the drum map, and
+           loading a song with a drum map which had 'swapped' (by dragging) items.
+          Some stuff (midi value adjustment knob) is not updated when changing drum map ANote, channel, or port. 
+          Workaround: Be sure to select another drum map item, then reselect the changed item again, after such operations.
+      * Changed: All softsynth midi controllers now have default initial values. (T356)
+        - Added default initial values to all softsynth controllers such as fluidsynth's controller map.
+        - Added 'initval' argument to all ::getControllerInfo() methods, which is passed to the newly created 
+           controller (new MidiController) in SynthI::initInstance().
+        - These initial values will then show on the various gui midi adjustment controls, knobs etc.
+      * Changed: Fluidsynth master gain and reverb initial settings. Gain was too loud and there was too much reverb. (T356)
+      * Fixed: Follow up - some issues with instrument editor. (T356)
+        - Instrument editor was sometimes falsely detecting instrument had changed. 
+        - Also, do not list 'internal' instruments like generic midi, soft synths, vst etc.
+        - Also, upon 'Save As', prompt for a new instrument name if the user hasn't changed it, to avoid duplicates.
+        - Remove any unsaved (new) instrument when moving to another instrument, closing etc.
+        - Fixed up tab order of instrument editor controls.
+        - TODO: When muse wants to close, trap it in the instrument editor so we can save.
+      * Fixed: Problem in xml parser. '&amp', '&quot' etc were being read as '&&', '""' etc. (T356)
+        - Added a couple of lines, and removed one, in Xml::stoken().
+      * Fixed: Zero bias midi controllers (with a negative minimum value, like 'pan') weren't working right. (T356)
+        - Broken after last changes. Added an updateBias() line to MidiController::read() 'controller' tag end section.
+      * Added: Send all instrument controller initial (default) values to all of a port's midi channels, 
+           except where explicitly initialized by the song. (T356)
+        - Added some code to MidiPort::setMidiDevice to initialize controllers from instrument, if needed.
+        - When setting a midi port's device (such as in Settings->Midi Ports, or simply when loading a song),
+           then any specified controller initial values in the instrument are sent to ALL of the port's channels, 
+           EVEN if the controller is NOT in the song. This ensures better consistency between songs, so that 
+           chosen controllers are not left in undesirable 'leftover' states. 
+          (Taken from important comments in MidiPort::setMidiDevice(): )
+          For example: A song is loaded which has a 'reverb level' controller initial value of '100'.
+          Then a song is loaded which has no such controller (hence no explicit initial value).
+          The 'reverb level' controller would still be at '100', and could adversely affect the song,
+           but if the instrument has an available initial value of say '0', it will be used instead.
+        - It is desirable to have defaults for some controllers, but it is wise to have NO default for certain 
+           other controllers, like the 'reset all controllers' and 'sustain' controllers (actually, zero would be OK).
+      * Changed: Clicking Midi->InitInstrument (or moving to song position 0) now initializes controllers
+          from instrument controller initial values, if they exist, or previously hard coded values if not. (T356)
+        - sendGmOn() and sendXgOn(), which are called via Audio::initDevices(), now use instrument controller
+           initial values if they exist, or the previously hard coded values if not.
+      * Changed: Non-softsynth non-GM drum tracks: Patch popups now show all drum AND melodic patches on ANY channel. (T356)
+        - For drum tracks, if the song type is not GM, and the track's port is not a softsynth, then all patches
+           including drum AND melodic are shown for ALL channels when 'select instrument patch' popup is clicked,
+           regardless of the patches' 'drum' flag setting (in the instrument editor). 
+           (Softsynths handle their own patch popup lists).
+        - Added a 'bool isDrum' parameter to all populatePatchPopup() methods, which is passed 'true' only
+           if it's a drum track, and changed a couple of lines in the only class which uses the drum flag - MidiInstrument.
+        - Previous behaviour was to show drum patches ONLY on channel 10 of drum tracks. 
+        - Reasons for change: 1): A midi device might have a non-standard drum channel(s), so drum patches 
+           as well as melodic patches are shown for all channels. 2): Since any channel can be used in the drum map,
+           melodic patches are shown as well as drum patches so that any patch can be selected for any channel.
+          NOTE: Each of a drum track's channels which are used in the drum map should be set to a patch number, 
+           otherwise it doesn't work right ! (**) This is true for softsynth devices too ! (**). 
+          So it was imperative that the user be able to select ANY patch on ANY channel, to suit their setup, 
+           for flexibility.
+          (If that same flexibility were applied to regular midi tracks (non-drum tracks), it might make the
+           'drum' flag for patches obsolete, since there would be no reason to filter them from the list !)
+      * Changed: All midi controller event values sent to a midi port are now constrained (limited) to the port's
+          instrument controller's range (if that instrument controller exists). (T356)
+        - Example: Incoming events from a midi keyboard's pitch wheel range from -8192 to 8191, but it is
+           desired to limit that range to, say -200 to 8191. One could use the midi input transformer to
+           accomplish this, but instead now you can simply adjust the chosen instrument's pitch controller range
+           (in the instrument editor), and then the pitch wheel's range will be limited to that range.
+        - This only affects playback events (and therefore 'live' incoming events), but does NOT affect
+           actual recorded data, so that by simply readjusting the instrument controller's range, 
+           or by changing instruments, the range can be restored with no loss of recorded data range.
+      * Fixed: Cleaned up all .idf files and changed ranges of all 'zero-bias' controls (-64/63 'pan' etc). (T356)
+        - Many .idf files had bare '&' characters in them, causing corruption of names and values when reading.
+        - Also turned on the 'drum' flag for ALL drum patches in MANY .idf instrument files.
+          Some .idf's I was uncertain about, and did not change : AlesisQS6, Waldorf Q.
+      * Changed: Fluidsynth pan controller range from 0/127 to -64/63. (T356)
+        - To be consistent with .idf file changes.
+      * Replaced: All direct calls to MidiPort::setHwCtrlState() from GUI thread, with new Audio::msgSetHwCtrlState(). (T356)
+        - My fault, I was not paying attention to iter-thread communications.
+      * Optimizations: Optimized MidiPort::setHwCtrlState(), MidiPort::sendEvent(), and calls to MidiPort::setCtrl(). (T356)
+        - Optimized MidiPort::sendEvent().
+        - Replaced code in MidiPort::setHwCtrlState() with more optimized code.
+        - Replaced several clumsy calls to MidiPort::setCtrl(), which checked for and created the controller,
+           with a new optimized MidiPort::setControllerVal(). 
+06.01.2009
+      * Fixed simpledrums/ssplugin.cpp to build with recent Ubuntu 8.10 (FN)
+17.08.2008
+      * Feature: Muse now has an instrument editor, complete with a midi controller editor! (T356)
+        - Click on the menu "Midi->Edit Instrument".
+        - You will see a sysex editor there too, but it is non-functional. (Use the midi event editor instead).
+        - >>> Tooltips and "What's This?" are provided with IMPORTANT information. <<<
+          >>> If you want to understand how to use instruments, patches, and controllers in your song, <<< 
+          >>>    READ THEM!    <<<
+      * Added: Environment variable MUSEINSTRUMENTS, so a (writable) instrument directory can be chosen
+         instead of default /usr/share/muse/instruments etc. (T356)
+        - Also added display of environment variables recognized by muse to command line help (muse -h).
+      * Fixed: Popup displays of instrument patches to filter according to GM, GS, XG song type, and whether
+         on drum channel 10. (T356)
+        - Use the new instrument editor to set these GM, GS, XG, and drum filters.
+      * Changed slightly: Creation of a new drum track - initialize to channel 10 instead of 1. (T356) 
+      * Fixed: Force audio prefetch seek when play is pressed. (T356)
+        - In Audio::seek, changed the call of audioPrefetch->msgSeek to force a prefetch,
+           to ensure the most recent data. Things can happen to a part before play is pressed  
+           such as part muting, part moving etc. Without a force, the wrong (old) data was being played.
+        - If you perform those same operations while playing, there may be a few seconds delay before you
+           hear the changes (the play cursor must move a certain distance before they're heard).
+        - TODO: How to make the same thing happen when transport is externally started, such as from qjackctl.
+            OR: How to force a prefetch at specific places like when a part is muted, and when it is moved,
+                 instead of just before play is started. That way the operations can be done quickly while playing.
+      * Fixed hangup: Upon loading of songs with fluidsynth soundfonts which can't be found. (T356)
+        - (!) Removed error message box from FluidSynthGUI::processEvent causing freezeup.
+        - You can still read fluidsynth errors by running muse on a command line. I figured it was 
+           better to be able to load the song and to see errors, instead of just letting it freeze.
+        - This should now allow you to share fluidsynth songs with other people (without the soundfonts).
+      * Fixed: Audio aux tracks not working, intermittent. (T356)
+        - Aux functionality was intermittent depending on whether the aux had out routes,
+           and whether any tracks feeding the aux had out routes, and other factors.
+        - In Audio::process1, rearranged, and added, some code to make aux work all the time now.   
+      * Speedups: To some songChanged() functions. Ignore unnecessary flags. (T356)
+        - For example simply adjusting midi gui controls would cause costly and
+           unnecessary rebuilding/redrawing of certain areas, like parts of trackinfo, and controller graphs.
+        - Noticeably less 'slugglish' when adjusting controls now.
+      * Fixed: Midi controller events not being added to midi port controller, after record with no part. (T356)
+        - Symptom: If you record midi controllers without first creating a part, muse creates the part 
+           for you and creates the controller graph OK, but when you move the play cursor around, the graphs
+           have no effect. This doesn't happen if you first create the part to record into, or manually edit a graph.
+        - Symptom: As above, the graph is OK, but the controllers don't show up in the list when you click 'ctrl'.
+        - Changed a line in song::cmdAddRecordedEvents() to use addEvent() instead of adding directly to list.
+      * Fixed: Automatic detection of pitch bend wheel not working. (T356)
+        - Added some code to MidiPort::sendEvent to detect ME_PITCHBEND events.
+        - Note: There appears to be a sound system bug (using ALSA 1.0.15): The system will NOT deliver any pitch 
+           bend events to muse until ANOTHER controller is detected, ex. move the modulation wheel THEN the pitch wheel.
+          Verified with another app - RG - and with a real midi hardware to hardware connection (not my KB's fault).
+      * Observed: Stuck or missing midi notes when recording or even just 'record armed only' 'live' playing. (T356)
+        - The sound system appears to be having occasional trouble detecting midi events, including note-off ! 
+          Verified with muse and RG (using ALSA 1.0.15). Not sure why or when this started, seems early this year...
+      * Linked: All midi knobs and sliders with their labels. (T356)
+        - Now they work together when displaying and adjusting.
+        - After careful consideration of the meaning of 'off' in those
+          labels, you now double click the label to turn the midi control on/off.
+          Off does not mean 'zero'. Rather, it means:
+          'Don't save this current value in the song file'.
+          When a midi control is 'off', loading the song won't initialize the controller with a value.
+          'Off' means the current value is set at 'unknown'. 'Unknown' means the actual 
+           'behind the scenes' hardware value is the last value that was set. The knob or slider still 
+           shows this value, or a default initial value, or if both of those are unknown, then 0.
+      * Changed: Midi and audio level slider/knob labels to show '---' for infinite attenuation. (T356)
+        - As mentioned above, the midi level slider labels can also show 'off'.
+      * Fixed: The new midi controller knob in pianoroll and drum editor. (T356)
+        - It was not adjusting anything.
+      * Fixed: Midi vu meters again. Now they should work! (T356)
+        - They were not responding to play events with an off velocity other than zero.
+      * Fixed: Marker view window doesn't remember if it is open or closed. (T356)
+        - Add a markerClosed function to app.
+      * Reverted: Back to audioRTalloc in mpevent.h (T356)
+        (!) - I had changed it to midiRTalloc, but that may have been causing problems like 
+               midi shutdown (audio OK) after a few hours, and crash soon afterwards. 
+              Verifying... No more midi shutdowns after a few hours, so far...
+            Ooops, not so fast, happened again...
+30.04.2008
+      * Fixed bug in drum editor. Dragging the splitter too far left causes runaway resize, stuck in loop. (T356)
+        - Tried several different arrangements, but QSplitter won't behave the way I need it to. Best I could do, so far. 
+        - You may notice some strangeness, like the controller graph not aligning with the matrix, if the right edge 
+           of the window is offscreen.
+      * Added 'add/set event' to audio automation right-click popup menus. Ancient request by R.J. (T356)
+      * Fixed arranger midi strip and arranger top controls not giving up keyboard focus after adjustment/entry. (T356)
+        - Further request by user G.B. Changed all relevant QSpinBoxes to custom SpinBox, which behaves like this:
+           Click up/down, or mousewheel, or hit enter with un-modified text (which means enter TWICE for modified text), 
+            and the control will give up focus, thereby allowing you to use global shortcut keys afterwards. 
+            Up/down keys still keep the focus.
+        - TODO: Piano roll and drum editor.
+      * Fixed major problem with lost jack routes upon file save, when save causes a jack shutdown. (T356)
+        - Symptom: You click save, but jack shuts down during the save, causing lost jack routes in the file.
+        - Fix: Cached the jack route names before file save, then used them during AudioTrack::writeRouting() xml code.
+          Note this doesn't actually stop shutdowns from happening - now it just saves your files without losing jack routes.
+      * Fixed mysterious intermittent wave part muting, as mentioned in 11.03.2008 (T356)
+        - !!! PartList and EventList are now sorted by frame instead of tick, for wave parts only. Because fetchData() 
+           didn't like sorting by ticks. This is a radical change. So far, no other areas found requiring further coding, but...
+      * Overlapping wave parts and events now mix together, instead of one part or event taking priority over others ! (T356)
+        - Virtually no speed hit, since muse was already cycling through all the wave parts/events, 
+           just not mixing them together. So the very LAST wave part/event in the part/event lists was 
+           taking priority over others.
+      * Fixed default instrument midi controller min/max values. (T356)
+        - Symptom: Some pianoroll midi controller graphs much too small or too big, vertically.
+        - Cause: You added these controllers to your track as a midi instrument, ex. General Midi (GM), then you 
+           changed the instrument, ex. to 'Generic Midi' or another instrument without those controllers,
+           which set improper min/max values.
+        - Fix: Added code to MidiPort::midiController() to set proper min/max values based on standard controller type.
+          However, if the original instrument used CUSTOM min/max values, the graph may still be distorted.
+      * Fixes to midi event list editor. (T356)
+        - Added true sorting of event list. Now you can click on column headers to sort as desired! 
+        - Added formatted program number display (like 1-1-120) for 'Val B' column.
+        - Fixed Poly After Touch events display in list. They were being listed as Channel After Touch.
+        - Fixed crash when 'Delete events' clicked with no actual items selected.
+        - 'Edit Contoller Event' dialog:
+          - Fixed 'Create New Controller' popup list: Now it actually creates the selected controller.
+          - Fixed 'Program' controller not showing correct program after selecting other controllers in list.
+          - Fixed too high initial value displayed for controllers without an initial value in the instrument file.
+        - 'Enter Poly After Touch' dialog:
+          - Fixed uneditable note box. Switched from PitchLabel to PitchEdit. 
+      * Feature added - Pianoroll and drum editor controller graphs now have a static manual adjustment knob ! (T356)
+        - Now you don't have to enter controller graph values to adjust a setting, just turn the knob.
+      * Changed 'Create New Controller' in event editor 'Edit Contoller Event' dialog, and 'add new...' controller popup 
+         list in piano roll. (T356)
+        - Now they only list controllers not already added, instead of all of them. 
+      * Fixed 'Position Edit' controls (0001.01.000 + up/down buttons) - click 'down' nothing happens. (T356)
+        - Added updateButtons() call to PosEdit::setValue(). 
+      * Fixed Mixer midi strip variation, reverb and chorus send knobs not enabled after controllers added. (T356)
+        - Now you only need to create the controller to enable the knobs, allowing you to set a manual value without  
+           having to actually create one or more controller events first.
+      * Fixed midi trackinfo pan value not the same as midi mixer strip pan value. (T356)
+        - Trackinfo pan now goes from 'off' (-65) to -64 to +63.
+      * Fixes to fluidsynth. Would crash when getting patch names from an 'unspecified' soundfont. (T356)
+        - In fluidsynti.cpp, various places check for FS_UNSPECIFIED_FONT only. Added check for FS_UNSPECIFIED_ID.
+        - Not sure if FS_UNSPECIFIED_FONT is redundant and unnecessary, but left it there anyway.
+      * Fixed old bug - IntLabel control - right click causes popup and runaway increment. (T356)
+        - Fixed NEntry widget. Same fix as for double entry widget (DEntry), somewhere way down on this change log...
+      * More fixes to wave part gluing/splitting/drawing/playing. (T356)
+        - Now all splitting/gluing of wave parts, even overlapping ones, even multiple times, should work.
+        - Fixed problem in WaveTrack::fetchData causing it to read too many samples of wave events.
+      * Fixes and changes to bounce functions. (T356)
+        - Fixed garbled target track or file. processWrite() was writing ALL the Audio Outputs to the file or track, instead of just one.
+        - Feature: Bounce to track (from menu): You now first select any single Audio Output track, and any single target Wave track.
+        - Feature: Bounce to file (from menu): You now first select any single Audio Output track.
+      * Fixed some problems with Mastertrack window. (T356)
+        - Mastertrack window was causing tempos to be inserted into tempo list, if window open when project loaded.
+        - Added signature list change event handling - to update signature value box.
+        - Fixed drawing of signature scale after signature list change.
+      * Fixed wave editor 'reverse' function crashing. (T356)
+      * Fixed track list not highlighting wave tracks (default green) when selected in the arranger window. (T356)
+      * Fixed midi VU meters, again. (T356)
+        - Borrowed idea from Muse 2. Self-decay the meters in midi strip code, rather than the midi thread code.
+        - The midi VU meters self-decay at a rate determined by the GUI update rate in the configuration.
+11.03.2008
+      * Fixed arranger controls not giving up keyboard focus after adjustment/entry. Requested by user G.B. (T356)
+      * Fixed gluing/splitting of waveparts. (Known bug of 02.02.2008 is gone now). (T356)
+      * Fixed playing, and arranger/waveeditor drawing, of glued waveparts. (T356)
+        - 'Working on' of 26.01.2008 is done.
+        - Drawing of waveparts, even 'glued' ones, now fully respects tempo changes.
+      * Fixed 'glued' mono + stereo wavepart drawing. Was drawing outside track if track height small. (T356)
+      * Fixed soloed/muted wavetrack audio 'bleeding' into other wavetracks. fetchData() was not checking isMute(). (T356)
+      * Fixed part colour popup to change unselected clicked item colour if no parts selected. (T356)
+      * Fixed recent possible accidental(?) change of tracklist xml tag 'header' to 'header1'. (T356)
+        - Muse was complaining: Tlist: unknown tag <header> at line 32
+      * Fixed MREventList in mpevent.h, to use midiRTalloc instead of audioRTalloc. (T356)
+        - Possible accidental(?) coding error since there is no other usage of midiRTalloc at all in muse.
+        - If it does help at all, it might just ease RT congestion a bit.
+      * Working on MIDI VU meters. They're too fast to see with jack, but should be OK with dummy driver. (T356)
+      * KNOWN PREEXISTING BUGS
+        - If you move waveparts around AFTER the current play position, then play, muse actually plays the same
+           arrangement as if you had not moved the waveparts at all, just one time - rewind the play position and
+           it corrects itself. This is because muse does not prefetch the audio again after the movement of the parts.
+          Workaround - After moving waveparts, be sure to rewind the play position to a point AT LEAST before those parts.
+        - Wave parts will sometimes mysteriously go silent for no reason. Move the parts slightly, or reload, or do
+           certain other operations, then the sound comes back. Working on this important issue!  
+02.02.2008
+      * Fixed a slight error in BigTime absolute display. Now shows proper absolute tick and frame values. (T356)
+      * Added an extra arranger wavepart right-click popup menu item - "file info". 
+        Shows what wave file(s) are used by the wavepart event(s). 
+        TODO: Either remove duplicate file names or list the files by event number. 
+              Spice up with more info like wave starting/ending points etc.             (T356)
+      * Removed some debug output lines from dummy driver - may have been causing intermittent crashes when moving position. (T356)
+      * Some more fixes to arranger partcanvas wavepart drawing - speeded up and tightened code.
+        KNOWN BUG: Does not correctly display more than one wave 'event' (file) per wavepart. (For ex. two waveparts 'glued' together).
+                   Working on this issue ! (T356)
+27.01.2008
+      * Fixed MIDI mixer strip VU meters. Let there be light! Not the best solution, a choice between two so-so methods. 
+        Looking at how to improve it... (T356)
+26.01.2008
+      * Pianoroll and drumedit now open at the current cursor position. (T356)
+        (The cursor position is that moving black vertical line on the time scale). 
+        This means you just click on an arranger midi part where you want to open the editor.
+      * Arranger, pianoroll, drumedit and waveedit now stay at their current (left-side) position when you use the scale bar. (T356)
+      * Fixed 'end of part' drawing problems - now you are guaranteed to see about 1+1/4 extra bar after the end 
+         of a pianoroll/drumedit (also compensating for drumedit drummap/canvas splitter), allowing you to 
+         add/move/clone notes past the end and allowing muse to properly auto-extend the part (to the right).  
+        TODO: Auto-extend parts to the left when necessary. (T356)
+      * Added vertical, and fixed horizontal, lasso/parts/events auto-scroll - even past the end of parts.  (T356)
+      * Fixed drawing of wave parts in arranger. Now you can rely on the 'picture' of the wave inside the part 
+         lining up correctly with the time scale, regardless of tempo/timesig changes in the song. (T356)
+      * More fixes to wave editor. Fixed drawing of markers - they were much too close together.
+        Added songChanged synchronization with arranger (you move/resize a wave part and the wave editor readjusts, etc.)
+        WORKING ON: In the arranger, if you move a wave part to the left, the wave editor will readjust but the
+         wave may be chopped off at the end. Investigating...  (T356)
+      * Corrected the drawing order of items from ALL parts in pianoroll and drumedit. For multiple-part viewing.
+        WORK IN PROGRESS: Added ability to select items from different parts at once, and to move them. 
+                          For now, only items from the currently selected part actually move. (T356)
+      * Added small checkbox to Big Time display. Now you can switch between formatted or absolute time display.
+        Absolute is handy for syncing with another app, or just knowing, absolutely, where you are in the song. Absolutely.
+        Added ToolTip popups describing each 'group' of numbers (bars, beats, ticks etc). (T356)
+20.01.2008
+      (ml)
+      * Added function for deleting note overlaps in piano roll (usually makes fluidsynth grumpy - silencing the following note). 
+      * Some work on opening the editor at current position and selecting the leftmost item
+      (ws)
+      * fixed hanging note when editing multiple parts in midieditor and
+        switching part
+19.01.2008 (ws)
+      * fixed Song::changeEvent(): part tick offset was not used
+      * fixed removing of controller events in Song::deleteEvent(); this affects midi recording
+        in replace mode and controller editing
+12.10
+      * Fixed automation right-click popup menu 'prev/next event' not working after a tempo change. (T356)
+        - Now you are guaranteed to be able to navigate the automation events, regardless
+           of how many tempo or time signature changes are in the song, or if you change the tempo/sig(s)
+           AFTER adding automation events.
+12.06
+      * Fixed softsynths 'Fluidsynth', 'Deicsonze', and 'Fluid' to allow pitch wheel changes. (T356)
+      * Fixed softsynths 'Fluidsynth' and 'Deicsonze' to allow MIDI patch changes. (T356)
+        Note that I included MIDI patch change code in 'Fluid', but fluid is slightly broken
+         and still doesn't respond. 'Fluid' should be removed from muse. It's obsolete. Use Fluidsynth.
+11.22
+      * Fixed LASH loading and saving. (T356)
+        - Symptom - Muse fails building with error about 'lash_get_fqn' not declared in scope.
+        - Cause - You are building muse with LASH > 0.5.1, where certain header files have been removed.
+        - Fix - Replaced both calls to lash_get_fqn with QString manipulations instead.
+      * NOTE! I encountered a muse segfault when you use LASH to close the project.
+        It says 'received unknown LASH event of type 10' (which is LASH_Server_Lost), then it says
+         'received unknown LASH event of type <<some big random number>>, then segfault and
+         a glibc backtrace due to 'double free or corruption'. Not a big deal, but this will need to be fixed.
+      * Tested OK saving and loading projects with LASH 0.5.4
+
+09.02
+      =======================================
+             * 0.9 final tagged (rj)
+	     no changes from pre3
+      =======================================
+
+08.22
+      =======================================
+             * 0.9pre3 tagged (rj)
+      =======================================
+
+08.20
+      * Fixed bug 1650953 - select and move segfault  (T356)
+        - Symptom - In piano roll, select some notes and move them past the end of the part,
+          then muse crashes. Also occurs when pasting or adding notes past part length.
+        - Cause - Canvas was not adding the new resized part to the midi editor. Also a bunch
+          of other stuff needed to be fixed for it all to work OK.
+      * Fixed broken master list editor. Should also cure bug 1687166 (T356)
+        - Symptom - Open master list and nothing is listed (should be at least one default
+          tempo and one default time signature). Click to add new tempo or sig and muse crashes.
+        - Cause - Some code was added to lmaster.cpp: LMaster::updateList() which broke it.
+      * Added auto part resizing to drum canvas  (T356)
+        - Symptom - In drums editor, there is no auto part resizing, like in piano roll.
+        - Cause - Missing all part resizing code. Added.
+      * Fixed intermittent crash when cutting a part. Improper 'delete while iterate' STL operation. (T356)
+      * Fixed arranger part selection - selected parts now draw on top of non-selected parts. (T356)
+      * Fixed arranger part operations (move etc.) to use selected part. (T356)
+      * Fixed arranger keyboard left and right previous/next part selection. (T356)
+        - Now you can use left/right arrow keys to cycle through parts in a track,
+           expecially useful for overlapping parts!
+      * Regarding part selection - A remaining problem is that there is no 'z-order' drawing
+         scheme. The part item list has no such ordering support.
+        - This means a selected part will (now) appear on top of others, but when unselected,
+           it will not stay on top. Adding that support could be messy.
+        - Best to leave it alone for now. At least you can (now) cycle through overlapped parts...
+      * Tested arranger part operations with worst case scenario - multiple tempo changes
+         and multiple parts. Test OK. All should be OK now. (T356)
+      * Added tooltip to song length box in arranger with text 'song length in bars'. (T356)
+      * Fixed wave editor - Black selection bar intermittent drawing. (T356)
+        - Symptom - In wave editor selecting a portion of the wave caused intermittent drawing
+          of the black selection bar.
+        - Cause - Unsure of exact cause or a permanent cure, but it's better now.
+          But it still draws intermittently if you zoom in (x magnify) very very close.
+          Working on this issue.
+      * Added feature - Wave editor now allows you to open multiple selected wave parts and
+         will display only those parts and you can edit them. Tested wave editor 'functions'
+         menu and it works OK on some or all selected portions of the multiple wave parts.
+        - This is in preparation for a possible automation viewer and/or editor.
+        - Work in progress. Some rough parts still to clean up. (T356)
+      * Fixed intermittent arithmetic exception crash in wave viewer. (T356)
+      * Fixed bad wave drawing above certain zoom level in wave editor. (T356)
+      * Enabled serial numbers in my deltaTick2Frame and deltaFrame2Tick routines, and
+         merged code. Makes it a bit faster. (T356)
+=======
+08.16 * Reverted change in synth.cpp, realtime playback of softsynths did not work (rj)
+      * fix for sustain pedal to work as suspected when looping. (rj)
+      * Above involved adding "managed-controllers", whenever a controller is found
+        time will tell if this is the right solution (rj)
+02.13
+      * Feature request: 1650957 space bar should start/stop playback fixed by
+        adding this possiblity, old style is possible with property setting in
+  configuration. (rj)
+02.09
+      * Fixed bug 1645575 - Eraser tool causes segfault in drum editor (T356)
+      * Added the project AUTHORS        (whooo are you... who who...) (T356)
+01.27
+      * Fixes to remove lots of warnings and potential errors in the code (WillyFoobar)
+        (rj by proxy)
+      * Fix for bug #1074808 "NRPN - still 128 values?" from Sebastian Gutsfeld (rj)
+01.06
+      * Changed 'exit' to 'return' when plugins are invalid (rj)
+01.05
+      =======================================
+            * 0.9pre2 tagged (rj)
+      =======================================
+
+2007.01.03
+      * Fixed some major issues with undo/redo. (T356)
+        - Symptom - Delete track(s), then undo, muse crashes.
+        - Symptom - Rename a track, then undo, muse crashes.
+        - Cause - 'Delete' destroyed the track(s), so undo would attempt to restore
+          non-existent object. Other problems caused rename crash. Still more undo/redo code
+          was causing problems, like left-over synth instances hanging around after loading a new song,
+          or crashing upon loading a new song if certain redo items were still in the redo list...
+        - Known bugs - DON'T rename a synth track then undo, muse still crashes. Not sure why yet.
+          After 'un-deleting' a synth track, you will have to open the 'MIDI Ports/Soft Synth' window
+          and manually restore its MIDI port.
+          Don't do anything too crazy like deleting multiple tracks while playing, might possibly crash.
+          After undeleting an audio wave track, its sound might not be sync'd with the rest of the song -
+          simply hit the fast-forward or rewind button to cure that.
+      * Prevented saving, and segfault upon loading, of routes in med file with empty names. (T356)
+        - Symptom - Jack shuts down, so instead of attempting to restart audio, you save your work,
+          but when you try to reload your song, muse crashes.
+        - Cause - Upon Jack shutdown, all audio in and out Jack routes were erased, and muse saved
+          the song like that. Upon reload, muse would crash due to the empty routes in the .med file.
+        - Note that this does not cure the original cause of this (Jack routes erased), so although you
+          can now re-load the song without muse crashing, you must manually restore all the audio in/out
+          Jack routes. So please try to restart the audio first. (Trying to fix this issue...)
+      * Add new soloing system. Check it out! (T356)
+        - Symptom - You click solo on a track but you hear nothing, and all other tracks are muted.
+        - Cause - Wasn't really broken, you just had to solo all other tracks in that routing path
+          to make sure whatever you were attempting to solo made its way to its destination so you
+          would hear it.
+          Inconvenient, yes. Especially with a large song with a lot of tracks, groups etc.
+          With this new system, this is done automatically for you. Even MIDI tracks driving synth
+          tracks, too.
+        - Known bug - If a MIDI track drives some external MIDI device which you feed the audio
+          back into muse, there's no way for muse to know how to couple the MIDI and audio in
+          tracks together. Sorry you'll have to manually solo both.
+          BUT - I'm CONSIDERING adding this - If an audio in track's name BEGINS WITH the name
+          of a MIDI track, I could couple them that way. For example - MIDI track named 'Track1' and
+          an audio in track named 'Track1 Input', then muse could mutually solo both tracks properly...
+      * Enabled MIDI mixer strip solo buttons. (T356)
+      * Some other minor fixups here and there. (T356)
+        - Other known bugs - Due to an earlier oversight, if you use your own custom LADSPA plugin
+          GUI's (see README.ladspaguis), QCheckbox and QCombobox controls may not automate quite right.
+          Note that this includes just one built-in custom GUI - for the 'TAP Reverberator' plugin.
+21.11
+      * Fixed loading of .med files, with plugins, created before muse-0.9pre1. (t356)
+        They will load, then save, correctly now.
+        - Symptom - Load an old song with plugins and some of the plugin controls can't be moved.
+        - Cause - Controller id's in med file mixed up, not save correctly, because of moving rack
+          plugins around, which never properly switched the id's before muse-0.9pre1.
+      * Fixed soloing (again). (t356)
+        - Symptom - Delete a soloed track, then soloing is messed up - other tracks may be muted but don't show it,
+          only way out is to reload. Speaking of which, loading also did not set track soloing correctly.
+        - Cause - Upon deleting a track or loading a song, track solo ref count was not updated.
+      * Added infrastructure for an improved soloing system, much more intuitive. (Not done yet!...) (t356)
+      * Fixed spelling mistake - Freeverb "Rooom" size. (t356)
+13.11
+      * By T356
+      * More automation fixes. Everything should be working now, check it out!
+      * Although still no automation editor, all of these changes so far should help
+         manipulate and navigate the events.
+      * Fixed touch mode events storing, was not right.
+      * Fixed a couple of stray signal connects which may have caused wacky controls.
+      * Sliders, knobs and labels now respond to mousewheel and paging properly.
+      * Linked slider/knob labels with sliders and knobs so paging or mousewheeling
+         a label works smoothly and linearly, even with logarithmic controls.
+      * Fixed integer controls (like Glame Bandpass 'stages').
+      * Fixed external plugin gui's to look like the built-in freeverb. This means
+         they now scale properly with different fonts. :)
+      * Hopefully the last of major automation conceptual changes - making sliders, knobs,
+         labels and checkboxes work together with the four automation modes, barring any fixes,
+         and a few tweaks to follow (like shift key for label mousewheeling, and how to make
+         a label stop updating so values can be entered). Some more right-click menu options
+         may follow (like store event, enable automation, enable interpolation).
+         Automation readme to come (need it!).
+      * Still to fix - Controls' right-click automation menu still a bit confused upon tempo changes.
+10.11
+      * reworked mute, old solution caused problems for solo
+      * solo is now united between midi and audio, they were previously
+        interdependant. This has the downside that if a soft synth is
+        soloed both the midi and the audio needs to have solo enabled (rj)
+      * fixed issue with hanging notes for softsynths when stop is pressed (rj)
+      * Backported fix from HEAD for using a file descriptor from two different
+        threads, should make it work somewhat better with SMP (rj)
+      * fixed faulty off value for aux when set to max (rj)
+      * Allow wheeling of tracks from track list (rj)
+08.11
+      * reenabled mute for outputs (rj)
+07.11
+      * Fixed timing bug causing MusE to depend on jack buffer setting
+        this needs testing, it involved uncommenting some code that might
+        have been commented for a reason (rj)
+05.11
+      * Added support for auto-scroll for other drag operations but
+      rubberband (rj)
+04.11
+      =======================================
+      * 0.9pre1 tagged (rj)
+      =======================================
+04.11
+      * Adopted RT locking method from 1.0 branch. (rj)
+      * Preparations for 0.9pre1 (rj)
+31.10
+      * By T356
+      * Fixed old bug - DoubleLabel right click causes popup and runaway increment.
+      * Currently the increment/decrement is fixed at 1, so that's why it doesn't
+         work for pan or other controls with 1.0 or less max.
+        - So fixes to that are next...
+29.10
+      * By T356
+      * Changing global tempo now updates things. (Like resizing wave tracks).
+      * Fixed segfault upon lengthening a blank new wave track part.
+      * Removed some thread-unsafe code from my first patch
+      * Fixed ladspa plugin automation not working until plugin displayed.
+      * Improved automation and ladspa plugin automation behaviour.
+        - While stopped and in touch mode, clicking an automateable control immediately
+           writes the value to the list, so you don't have to press play then stop
+           just to store one value.
+        - Smoother slider transitions from last touched value to previous stored values,
+           so that they don't suddenly 'jump' to previous stored values when you let go.
+        - Checkboxes now automated. Their behaviour in touch mode is slightly
+           different than sliders - they remain 'touched' until you stop, but store
+           only up to the last toggle done.
+        - Checkboxes now check as soon as you click them.
+        - Sliders now have 'mouse cursor capture (tm)' so you can actually grab onto
+           the thumbs even if they are moving too quickly due to automation. Paging can
+           still be done with right button.
+        - Sliders and knobs now work properly if you 'page' them (click outside the thumb
+           or dial).
+        - Added right-click popup menu on all automateable controls with
+            previous event    (seek)
+            next event        (seek)
+            erase event       (if cursor is on one)
+            erase range       (between left and right markers)
+            clear automation  (clear all events)
+          Known bug: Becomes slightly confused if tempo is changed after doing automation.
+          Workaround for now: Press play to update the cursor to a new position.
+04.10
+      * Select the right item when items are stacked on top of each other, for pianoroll
+        and arranger (rj)
+      * Do not display resize cursor when last track cannot be resized (rj)
+03.10
+      * Apply effect rack before sending aux, changed after discussion with Thorsten Wilms (rj)
+      * Auto assign internal softsynths upon creation (rj)
+      * New method for pasting parts. If several parts are pasted they are now spaced
+        according to their original spacing. This only works reliably when the copied parts
+        are all on one track. (Possibly copying parts from several tracks should be
+        disallowed), fixes bug #1516294 (rj)
+      * Muting of midi-tracks no longer mute input, bug #1092343 (rj)
+01.10
+      * Fixed issue with playing of controllers when moving playhead. basically
+        all events from all parts where played at the beginning, fixes bug #1316542 (rj)
+30.09
+      * Cached peak files are now updated when wave files are more recent, bug #1469177(rj)
+      * Fixed bug with recording notes to existing part, bug #1552783 (rj)
+29.09
+      * MusE now asks when imported wave file has differing samplerate, bug #1428248 (rj)
+28.09
+      * Always restore sequencer configuration even when song
+        is loaded without config, fixes bug #1092289, midi mixer settings not restored (rj)
+27.09
+      * Optimizations and fixes to rubberband scrolling (rj)
+      * Aux changed to be affected by volume and pan (rj)
+      * Aux now affected by mute (rj)
+26.09
+      * Fix for pianoroll selection of events in/outside loop with respect to part offset (ml)
+      * Added lasso/rubberband scrolling in arranger, drumedit and pianoroll, bug #1057732 (rj)
+24.09
+      * Followups by T356
+      * Fixed rack plugin change not clearing automation
+      * Fixed moving an empty rack position
+      * Fixed moving a plugin onto itself
+      * Changed colours of audio output and wave track
+         strip names to match icon colours
+20.09
+      * Fixed aux sending (rj)
+      * Patch from terminator356 to fix logarithmic feedback to plugin sliders (rj)
+19.09
+      * Various fixes from Torsten Duwe (rj)
+        - deicsonze undefined returnvalue
+        - vam uninitialized value
+        - 64bit fix for calling external wave editor
+      * Fixed multiple part undo for move,drag and copy in arranger, bug #1516298 (rj)
+      * Fixed multiple note undo for move and drag in pianoroll (rj)
+      * Fixed cursor placement in List Editor upon deleting events bug #1417718 (rj)
+16.09
+      * Following changes by   { terminator356 [at] users [dot] sourceforge [dot] net }
+      * The changes can be applied to muse-0.7.2preX or muse-0.8.1 and work fine in both.
+      * Fixed soloing. Also multiple soloing now allowed.
+        - TODO: Soloing of tracks which feed a group. Workaround for now: Solo the tracks AND the group.
+      * Enabled solo buttons on the mixer strips.
+      * Fixed major issues with rack plugin moving, saving and loading.
+      * Fixed problems with multiple tempo changes and incorrect wave part lengths.
+      * Changed plugin code to use double instead of float to stop certain errors, and consistency.
+      * Fixed some minor spelling mistakes.
+      * Fixed issues with audio track automation.
+      * Fixed very 'jumpy' volume sliders and pan knobs under automation.
+      * Fixed several other small problems. For example a duplicate define in song.h
+      * Changed the way audio track automation works.
+        - For ease of use, the current mode now remains selected, even after a file write and re-open.
+        - To reduce the chance of accidental changes, for added visual warning, Touch and Write modes
+           colour the automation mode box red.
+        - Write and Touch modes: Only if the controls were touched, changes will be stored when
+           the transport is stopped. Since the current mode remains active, you can move to
+           another part and do some more automation.
+        - Write mode: The controls are updated with stored values until you touch them, then they
+           store from the time you hit play to the time you hit stop. If you touch the controls AFTER
+           you hit play, you may get unexpected results so remember to initialize that 'first value'
+           (at the time when you hit play), since muse will NOT 'fill in' from the time you hit play
+           to the time you first touched the control, with the value of that first touch. (Maybe support
+           this later).
+        - If you load a plugin preset, if the control values don't seem correct, try setting the track's
+           automation to 'Off', because the track will usually be on 'Read' - reading stored values.
+        - TODO: Muse really needs an automation editor/viewer! Perhaps integrate with wave viewer.
+                Also, add one more automation mode: 'Instant mode'.
+      * Hmmm, oh yes - added full LADSPA plugin automation. Check it out!
+        Compatibility with existing med files' Plugin section should be OK, but if you open an
+         existing med file with plugins, and the plugins' control values are no longer correct,
+         let me know. See comments (with these changes applied) audiotrack.cpp around line 557.
+        - TODO: Checkbox automation not working right. We need a better checkbox - one which checks
+                 as soon as you press down! Also would like to add bypass and mute automation.
+05.08
+      * Fixed build without fluidsynth (rj)
+14.07
+      * fluidsynth: fixed pitchbend events, fixes bug #1404212 (ml)
+
+13.04
+      * Editing volume and pan with keyboard on audio strip now works (rj)
+      * Fixed issue with recording audio, fifo could overflow when
+        when running with small jack sizes (rj)
+      * fixed storing of wave files with relative path when located
+        "under" the project path (rj)
+28.03
+      =======================================
+      * retagged app.cpp and Yamaha-Motif-Rack.idf (rj)
+      =======================================
+      * fixed build bug in app.cpp (rj)
+      * fixed bug with Yamaha-Motif-Rack.idf (rj)
+27.03
+      =======================================
+      * 0.8.1 tagged (rj)
+      =======================================
+      * some lash fixes (rj)
+26.03
+      * Added next/prev marker, keyboard shortcut (rj)
+25.03
+      * Reverted fix for silent softsynths, synths were not silenced
+        upon [stop], gah! (rj)
+      * Added LASH support (patch from evermind @ gentoo) (rj)
+21.03
+      * Added Motif-Rack idf from europeen (rj)
+19.03
+      =======================================
+      * retagged dummyaudio.cpp (rj)
+      =======================================
+      * Fixed build bug in dummyaudio.cpp (rj)
+18.03
+      =======================================
+      * 0.8 tagged (was 0.7.2) (rj)
+      =======================================
+      * Added idf files from linux chaos
+        Waldorf-Q, Yamaha-01v,Yamaha-Motif, Yamaha-P100 (rj)
+05.03
+      * Arranger no longer performs "seek" while editing
+        when in ext-sync mode (rj)
+      * Play/Stop disabled for all when in ext-sync mode (rj)
+02.03
+      * more work on extern sync, loop works better (rj)
+      * no-audio + extern sync does not hang anymore (rj)
+      * muse now starts even if jack is not found (rj)
+      * fixed a number of divide by zero errors mainly affecting zoom (rj)
+11.02
+      * Added menu alternative for storing plugin preset (rj)
+06.02
+      * Updated/improved swedish translation. (rj)
+04.02
+      * Fix for softsynths going silent under load. Sometimes events arrive
+        with time=0, this is now handled. Why it happens is yet unknown.(rj)
+02.02
+      * check audioDevice and _client for validity (rj)
+13.01
+  * amd64 fix in driver/rtctimer.cpp (ws)
+09.01
+      * Added patch for vam from mane_grotesk (rj)
+07.01 * On drumtracks, there was no check for non-existing ports. If a drum
+        instrument was configured to output to a port other than standard for
+        the track, there was a segfault. Now output to non-existing ports are
+        simply ignored (ml)
+
+05.01
+      * Added updated french translation from Intent (rj)
+      * Fixed crash bug in pianoroll when moving several
+        events outside part. (rj)
+      * Fixed esc key in drumeditor name edit (rj)
+
+03.01
+      ========================================
+      * 0.7.2pre5 (final!) tagged (rj)
+      =======================================
+
+02.01
+      * Added popup when enabling rec for a track unable to create it's
+        wave file (rj)
+2006.01.01
+      * Enlarged listeditor dialog (FR:1392090) (rj)
+      * Changed preset file extension of vam presets to .vam (rj)
+      * No longer translates dir name for drummaps (rj)
+      * Fixed crash bug when arrowing left in an empty editor (rj)
+      * Added F2 name edit in drum editor (rj)
+      * Added up/down arrowing in drum editor (rj)
+30.12
+      * Fixed bug in detection of RTC (rj)
+      * Removed ugly printouts from probeing for browser (rj)
+29.12
+      * Reawoken Organ: (rj)
+           - read/write current settings
+           - automation of all parameters
+      * Reawoken VAM: (rj)
+           - read/write current settings
+           - automation of all parameters
+           - preset dialog
+28.12
+      * Changed audio prefetch buffer to be dynamically sized after the
+        jack buffers (rj)
+27.12
+      * Fixed allocation of wave memory when reading and writing sound files
+        fixes problems with audio-operations (rj)
+      * Fixed problem when external wave editor was not correctly defined (rj)
+26.12
+      * Race condition between threads caused lockup upon quit and load project.
+        Fixed by checking if sequencer is actually running before making
+        internal IPC call, made major difference (rj)
+21.12
+      ========================================
+      * 0.7.2pre4 tagged (rj)
+      =======================================
+
+      * Now dynamically extends parts if events continue after end and
+        ignores pastes before part, fixes bug:1363066 Paste outside segment (rj)
+18.12
+      * ExtSync improvements, handles relocation of playhead during stop
+        (on my gear atleast), does not work during play (rj)
+      * fixed bug building synths (introduced during last checkin) (rj)
+14.12
+      * fast_log10 exchanged for HEAD version (old version doesn't work with
+        gcc4), fixes problem with meters and sliders not working (rj)
+      * Added patch from Martin Habets fixes core dump problem while
+        building with LADCCA (rj)
+      * Added patch from LarryL autoconf changes to synth building (rj)
+      * Fixed drag in effect rack that it does not start directly (rj)
+      * Adapted optimization parameters for gcc4 (rj)
+13.12
+      * Possibly fixed issue with crashes during load of projects
+        by putting delays between start/stop of sequencer and actual load
+        operation. This should make sure that the process loop is idle. (rj)
+      * now tries both RTC and Alsa (in that sequence) for main timer (rj)
+      * added checks if alsaDevice is valid (fixes several crash bugs when
+        muse goes zombie). Should be done in more places. (rj)
+      * added check if audio is really running when jack calls process.
+        Sometimes it's called when it should not. (rj)
+12.12
+      * updated muse_ru.ts from Alexandre Prokoudine (ws)
+11.12
+      * removed assert, fixes bug:1376783, deleting track with pianoroll open
+        crashes muse
+09.12
+      * Added patch from Daniel Cobras regarding compatibility with 64-bit
+        systems (rj)
+      * fixed crash bug when muse tried to show plugin-guis when the
+        plugin did not exist (rj)
+29.11
+      * fixed seg fault when deleting last note in pianoroll editor (ws)
+13.11
+      ========================================
+      * 0.7.2pre3 tagged (rj)
+      ========================================
+      * Changed back to AlsaTimer (rj)
+8.11
+      * fixed typo in share/locale/Makefile.am
+7.11
+      * removed some dubious locks in thread start (ws)
+19.10
+      * Fixed bug 1329537 (User defined fonts not updated) (rj)
+13.10
+      * added emuproteus200.idf from Piotr Sawicki (ws)
+      * updated polish translation
+12.10
+      * added polish translation from Piotr Sawicki (ws)
+26.9
+      * Handle restart of Jack and restart of audio (rj)
+21.8
+      * Added new timer classes from Jonathan Woithe. (rj)
+14.8
+      * Solo for audio tracks improved by removing the possibility to mute Output tracks (rj)
+      * Implemented REPLACE for midi recording (seems to sometimes miss notes though...) (rj)
+      * Fixes for Appearance dialog, background pic, event display (rj)
+      * Marker window now toggling (rj)
+      * Added "raise" to more dialog windows (rj)
+      * compress event display in parts somewhat (rj)
+      * reverted pipeline again...bah...think before you change (rj)
+      * bounce now stops correctly (rj)
+
+
+13.7
+      * Fixed position of import of wave files, inserted at cursor, now inserts at mouse (rj)
+      * Added drag&drop support to plugin racks in mixer, internal and to/from disk (rj)
+      * Changed the plugin pipeline depth to 5.. four is too little.. though it should be runtime extendable, wip (rj)
+      * Added patches from Daniel Kobras that correct errors in EditMetaDialog
+      and old html docs. (rj)
+      * Added uppercase filters to midi import (rj)
+
+12.7
+      * Added quick search to LADSPA plugin dialog (rj)
+11.7
+      ========================================
+      * 0.7.2pre2 tagged (rj)
+      ========================================
+10.7
+      * Added possibility to edit selection of wave in external editor (ml)
+9.7
+      * Added gain modification functions + misc to waveedit (ml)
+8.7
+      * Updates to wavefile modification, implemented normalize, fade in, fade out and reverse of wavefile selection.
+        Removal of wavefile undo data on shutdown (ml)
+7.7
+      * Added undo/redo handling for modifications of wavefiles + mute of selection in waveedit. expect updates. (ml)
+6.7
+      * Added selection to waveeditor + ignore unhandled keyevents in waveeditor (ml)
+4.7
+      * Implemented resize of waveparts (ml)
+      * Added Idf files by Steve D for Roland FantomXR, SRX-02 and SRX-09 (rj)
+2.7
+      * Fixes for waveedit: offset problem fixed (no more empty waveedit windows), initial zoom value to
+        roughly match size of part (ml)
+01.7
+      * Fixed bug with loading of background pixmaps (rj)
+28.6
+      * Only send MMC continue message when in playback state when seeking (rj)
+22.6
+      * Fixed bug 1199171 (Time change: a part does not completely fit into 4 bars), part
+        resize problem (ml)
+21.6
+      * Added scrollwheel support for vertical scrolling in arranger, pianoroll and drumeditor (ml)
+      * Fixed bug 1056996: Multiple selection, but single paste. Possible to copy several parts in arranger (ml)
+20.6
+      * Fixed bug 1092424: bug in reposition of instruments in drumeditor (ml)
+19.6
+      * Added recall of last entered directory in filedialog for global and user mode + recall of
+        opening mode (global, user or project) (ml)
+18.6
+      * Fix for drumtracks and part export/import
+      * Fix for opening Midi port/softsynth dialog when already open (now raised and set to active window)  (ml)
+13.6
+      * Added export/import of midi parts (.mpt-files), drag & drop also possible (ml)
+05.6
+      * Fix for generating midi clock, needs field testing. (rj)
+04.6
+      * Added fixes to AlsaTimer and DummyAudio from Jonathan Woithe (rj)
+      * Added fix so AudioPrefetch is initialized upon starting the sequencer,
+        which for instance happens when loading a song (rj)
+24.5
+      * Added Roland E-28 idf file from Jonathan Woithe (js)
+16.5
+      * Updated ladspa-gui for newer version of tap-reverb (rj)
+15.5
+      * Allows for several midi devices with the same name, they are now renamed
+        internally so they have a unique name. This is a partial fix for synths
+        that do not correctly give each instance a new name. (rj)
+12.5
+      * s1 softsynth added square wave with parameter (rj)
+11.5
+      * Fix for bug 1198747, tests for fluidsynth and rtcap in configure.ac (rj)
+      * Fix for bug 1198744, added patch for reading browser setting from config
+        without crashing, from Philip Nelson (rj)
+      * Fix for bug 1188767, downmix won't stop playback until reaching the
+        right marker (rj)
+08.5
+      * the instrument list in the drumeditor now has fixed width when resizing the window (finally, it made me nuts) (ml)
+      * added nudge event position left/right w keyboard (ctrl+left/rightarrow as default) to pianoroll and drumeditor (ml)
+      * added fixed length command to pianoroll, uses snap-to value (ml)
+07.5
+      * added snap/quantize patch from Petr Mazanec (snap of notes in pianoroll+drumeditor is now controlled by
+        snap, not quantize) (ml)
+      * simpledrums: added save/load of setup to file, bugfixes.
+        simpledrums version is now 1.0 (go figure! ;) (ml)
+06.5
+      * No longer crashed when enabling audio metronome when there's an aux (rj)
+
+      ========================================
+            * 0.7.2pre1 tagged ! (rj)
+      ========================================
+04.5
+      * extern sync algorithm "reworked" (rj)
+1.5
+      * simpledrums: backported fixes for channel number + memory deallocation,
+        fixed issue with clearing of sampledata, I hope (ml)
+30.4
+      * fluidsynth: bankno is saved to project, switched to hbank from lbank (ml)
+      * Now really runs libtoolize in autogen.sh (rj)
+29.4
+      * make sleep() in watchdog thread non interruptible to avoid
+        watchdog timeouts at startup (ws)
+      * added vst preallocation of memory "fix" (rj)
+      * More fixes to filenames containing dots (for instance wca files) (rj)
+      * Added Yamaha-PSR275 instrument file by Petr Mazanec (rj)
+27.4
+      * fixed patch-info issue in Fluidsynth (bug 1191214) (ml)
+25.4
+      * fixed bug w paste in drumeditor, 1189267, patch from P Mazanec
+18.4
+      * removed file ltmain.sh; this file is now created by "libtoolize"
+        command in autogen.sh (ws)
+16.4
+      * Fixed bug 1152441, filename can now have several dots (ml)
+      * Fixed bug 1183980: fluidsynth pitch controller wasn't given to MusE from the synth (ml)
+15.4
+      * Added a redundant test that makes midi input work on PPC for some
+      reason. (will research a better fix for 0.8) (rj)
+10.4
+      * Added an error popup when importing wave files fails. (rj)
+30.3
+      * [DONE] midi -> edit instrument is not implemented -> remove it (js)
+      * [DONE] same for random rythm gen -> is not implemented -> remove it (js)
+      * [DONE] BUG: pianoroll editor -> tools resize wrong, they should stay on max they need instead of width fit (js)
+      * have to go to the dentist on 7.3.2005, god help me, i fear this will kill me (js)
+29.3
+      * README changed some links (js)
+      * README added some icons to arranger (js)
+      * added support for german localisation (30% translated, still quite bad) (js)
+      * help: changed muse homepage location (js)
+      * more to come (js)
+28.3
+      * Fix for overflow when importing midi (rj + ml)
+6.3
+      * Added some fixed on dialog handling, mainly "esc" will close the widget now. (js)
+      * As usual added the icons which i forgot to add in the last release
+      * Corrected the drums icon which was a wave icon (in the dropdown, arranger)
+26.2
+      * Added Roland-SCD70.idf from Emiliano Grilli (rj)
+09.2
+      * fixed bug with sending start play w/ midi-clock (rj)
+01.20
+      * Added RT support and better working timing to DummyAudio backend (rj)
+      * New version of MC505.idf from Wim VW (rj)
+01.18
+      * Added script to convert MusE 0.6 songs to 0.7 format (rj)
+01.17
+      * Midi clock sync first test, unstable (ml)
+01.14
+      * patch from Erwin Scheuch-Heilig to allow for libtool >= 1.4 (ws)
+01.10
+      ========================================
+            * 0.7.1 tagged ! (rj)
+      ========================================
+      * ZynAdd instrument def file added (ml)
+      * Now the length is updated when importing a midi file to a project,
+        fixes bug: 1056994 (rj)
+      * Disabled freewheeling for bounce functions (song.cpp:_bounce) (rj)
+01.09
+     * Fixed bug: 1094622, MidiTransform now uses new controller types (ml)
+     * Fixed bug with custom plugin guis that caused them to be
+       uninitialized (rj)
+     * fixed just introduced jack graphChanged problem (rj)
+     * Fixed a crash issue with Thread class (only did happen when you mess around) (rj)
+     * Synti tracks don't crash when being renamed (rj)
+01.04
+     * Fixed a crash problem when using several fluidsynths (rj)
+     * Now fluidsynth restores most memory upon deletion
+       (but not all it seems) (rj)
+     * fluid disabled when fluidsynth disabled (we should probably
+       disable it all together) (rj)
+     * Fixed mixdown clash with auto-rec enable (rj)
+     * Fixed crash / hang when closing connected jack apps (rj)
+2005.01.02
+      ========================================
+            * 0.7.1pre3 tagged ! (rj)
+      ========================================
+
+31.12
+      * Mastertrack list editor updates (add sigevent + misc) (ml)
+30.12
+      * Insertion of tempo events in list mastereditor added (ml)
+29.12
+      * Added support for changing time signature in list master editor (ml)
+27.12
+      * Added support for changing tempo + position of tempoevents in list mastereditor (ml)
+      * Backported auto rec-enable from HEAD branch (rj)
+      * Added visual feedback of marker addition in ruler as well as
+        possibility to remove markers with shift+rmb (rj)
+      * Made it easier to resize the last track (bug: 1041798) (rj)
+      * Fixed bug: 966005, new projects are now called "untitled" (rj)
+      * fixed bug: 1085791, no more crashes with delete + drag (rj)
+26.12
+      * Listedit bugfixes. Consideration of part offset used for events (ml)
+20.12
+      * Fix for bug #1085796 (when renaming channel by doubleclicking it
+        in tracklist and a part is selected, pressing return opens editor for part) (ml)
+17.12
+      * -a (No Audio) flag added, improved Dummy audio backend (rj)
+      * alsa timer bugfix (rj)
+      * added deicsonze patch from Alex Marandon to fix QT<->STL
+        problems on affected platforms (rj)
+
+14.12
+      * Disable of fluidsynth works (rj)
+      * Added test for libsamplerate (rj)
+      * Reenabled --enable-suid-install (rj)
+      * Added <iostream> to simpledrums.h (rj)
+      * Added -no-rtti to simpledrums (ml)
+
+13.12
+      ========================================
+      * 0.7.1pre2 tagged ! (rj)
+      ========================================
+      * SimpleDrums 0.2 softsynth added (ml)
+12.12
+      * Removed -no-rtti from configuration (rj)
+      * Extern sync (codename: it_works_for_me__sometimes) is back! (rj)
+      * Changes to midi-input, events to softsynths vanished (rj)
+      * bounce to file now limits output to +/- 0.99 (rj)
+      * crash bug on missing event in sig.cpp fixed (rj)
+      * Changed default timer resolution to 1024 (rj)
+      * Applied fix from Levi D. Burton to allow midi thread to run
+        realtime allthough Jack is not (rj)
+      * New version (0.22) of DeicsOnze from Alin Weiller (rj)
+
+9.12
+      * Now autogen.sh requires libtool = 1.4, 1.5 does not generate
+        softsynths correctly (rj)
+4.12
+      * Added another IDF from Christoph Eckert for Alesis QSR,QS7 and QS8 (rj)
+01.12
+      * fixed import of type 0 midi files (ws)
+      * Added updated DeicsOnze (0.21) from Alin Weiller (rj)
+      * added a branch of new icons, changed default colors of
+        wav/audio output track in arranger (js)
+      * changed changelog (js)
+30.11
+      * Added IDF files from Christof Eckert for Access Virus,
+        Hammond XB and Waldorf Microwave (rj)
+      * backported fix from 0.8 so listing patches for synths
+        works again (rj)
+29.11
+      * fix midi import: tick values of tempo/signature
+        and marker events are now properly converted to internal
+        resolution (backport from 0.8) (ws)
+      * some make system changes to better handle precompiled headers (ws)
+      ========================================
+      * 0.7.1pre1 tagged ! (rj)
+      ========================================
+      * LADCCA was incorrectly disabled in config, now fixed (rj)
+      * Changed URL of homepage to www.muse-sequencer.org (rj)
+28.11
+      * Partial support for "input only" midi devices. (rj)
+
+27.11
+      * Added Alsa Timer as a new timing device, RTC is still
+        available, though not easily selectable yet. (rj)
+      * Made some changes to how threads are created, for systems
+        where thread creation has been erratic, linux2.6 in various
+        configurations. Not yet verified if it makes any differance. (rj)
+08.11
+      * Backported audio metronome (rj)
+      * Backported open/save dialog improvements (rj)
+      * Added -r parameter to allow MusE to start without RTC
+        not the right thing to do, but it seems necessary on PPC,
+        it's a start. (rj)
+      * Added patch from CK to allow getopt to work on PPC (rj)
+
+02.11
+      * Added icon stuff to tlist.cpp (js)
+01.11
+      * Added Alin Weiller's DeicsOnze synthesizer (ws)
+      * add dummy call to process() in Audio::start() to warm up caches
+        to avoid "JACK - zombified" during startup (ws)
+23.08
+      * fix crash in list editor - create new controller (ws)
+      * increase required JACK version to 0.98.0 (ws)
+20.07
+      * updated muse/muse.pro and share/locale files (ws)
+18.07
+      ========================================
+      * 0.7.0 tagged ! (rj)
+      ========================================
+      * output fifo warning only if cmd line "-D" switch is set (ws)
+17.07
+      * fixed separate handling of recorded events vs played events (ml)
+15.07.
+      * do not start the disk helper thread in realtime mode (ws)
+      * check for JACK thread really running in SCHED_FIFO mode, if not
+        (as on my system with kernel 2.6.7 and nptl) try to set it. (ws)
+      * removed some exit() and abort() calls to react somewhat more gracefully to
+        to internal errors (ws)
+14.07.
+      * fixed -V (no vst instruments) option (ws)
+      * do not save midi controller information in ~/.MusE file  (ws)
+      * another try to fix midi loop handling: Loop len now should be
+        sample accurat. The loop is shifted left at most one audio
+        cycle to meet the requirement of loop end matching audio cycle
+        end. When JACK transport is in "JackTransportStarting" mode,
+        MusE internally continues rolling, so there are no repeated
+        cycles anymore (ws)
+      * Added message boxes when alsa and jack fails to initialize (rj)
+      * Disabled solobuttons in mixer (rj)
+13.07.
+      * added new icons for the mixer solo/mute (js)
+      * added refresh for the solo/mute icons (rj)
+      * added icons for drum-/listeditor in the arranger on rightclick (js)
+12.07.
+      * fixed typo in loop handling (ws)
+      * added patch from Daniel Schmidt to be able to configure
+        MusE without X being available (rj)
+      * Removed geometry data etc from templates (rj)
+11.07.
+      * disabled midi mtc sync as its not implemented; disabled
+        midi sync slave modes as they are currently not working (ws)
+      * enabled sending midi clock (ws)
+28.06.
+      * splitted removeTrack()/insertTrack() into three phases: pre realtime
+        actions - realtime actions - post realtime actions; this allows
+        to move memory allocations out of realtime task (ws)
+      * changed undo/redo of tracks: synti instances are now really deleted on
+        delete track (ws)
+      * jack connection changes with qjackctrl are now recognized by MusE (ws)
+27.06.
+      * applied patch from John Check to add a panic button to pianoroll
+        editor (ws)
+28.06.
+      ========================================
+      * 0.7.0pre4 tagged - one more (rj)
+      ========================================
+26.06.
+      * Some packaging additions, icon, spec files.
+        (only mdk at the moment) (rj)
+25.06.
+      * fixed midi timing bug (ws)
+19.06.
+      * don't catch SIGCHLD, this interferes with vstInit() (ws)
+      * "givertcap" was not found when not in current directory (ws)
+      * impl. "all notes off" for organ synti (ws)
+18.06.
+      * disabled buttons for not implemented functions (ws)
+      * added muse/wave/solo button in the trackinfo ;-) (js)
+15.06.
+      * enabled some midi sync code (ws)
+14.09.
+      * dialogs for change of drummap when converting miditrack to drumtrack
+        or changing port. redirection of keyevents from tlist to canvas (ml)
+13.09.
+      * save/restore parameter for VST synthesizer (ws)
+      * automatic trackchange in tracklist when selecting parts in arranger (ml)
+      * added modify velocity to drumeditor + bugfix for modify velocity (ml)
+      * save/restore parameter for VST synthesizer (ws)
+12.09.
+      * fixed backup command when filename contains spaces (ws)
+      * fixed midi step recording (ws)
+      * fixed bug in arranger: pressing enter after renaming part started
+        editor (ws)
+09.06.
+      * added support for VST/windows software synthesizer (ws)
+      * delayed loading for software synthesizer: syntis are loaded, when
+        they are instantiated the first time (ws)
+08.06.
+      * fixed --enable-rtcap configuration option (ws)
+07.06.
+      * increased "dimension" in memory.h to make MusE work on 64 bit
+        architectures as requested from Simone Piunno (ws)
+      * added aux send for syntis (ws)
+      * added info box which explains why when MusE gets kicked by Jack (rj)
+06.06
+      * added instrument definition for roland MC-505 from Wim VW (ws)
+05.06
+      * Added backup creating save patch from Levi D.Burton (rj)
+01.06
+      * transpose + grid patch added (alin weiller)
+      * fixed moving events in drum editor (ws)
+      * added new config option: disable splash screen (ws)
+31.05
+      * fixed crash in pianoroll when using shortcuts for selecting
+        quant values when quant was set to 1 (no quant) (ws)
+      * fixed a crash when moving an event to tick positions < 0 (ws)
+      * fixed: selecting a note in pianoroll editor and changing a value
+        with note-info toolbar crashed MusE (ws)
+      * bugfix arranger: fix for selecting part -> ignore global accelerators (ml)
+      * bugfix for arranger selection of part above/below when using keyboard (ml)
+      * added pianoroll velocity variation patch (alin weiller)
+30.05
+      * hopefully a fix for drum in & outmap-issues in midi.cpp (ml)
+25.05.
+      * shortcuts for "arrowing around" in arranger added (ml)
+      * 0.7.0pre3 tagged - the last!!! I hope (rj)
+24.05.
+      * fixed a crash on new -> load template (ws)
+      * FluidSynth: added support for drumpatches (equiv to midichan 10 patches) (ml)
+23.05.
+      * exit if rtc open() fails (ws)
+      * changed default start behaviour to open default.med template (rj)
+18.05.
+      * added many new/redone icons (js)
+      * changed aboutbox.ui for qt 3.2 compatibility
+      * changed app.cpp (added the icons)
+17.07.
+      * added stereo/mono icons to mixer (ws)
+      * added a first version of an icon for muse and adapted aboutbox to the same.
+        (graphics by Joachim Schiele) (rj)
+      * Improved handling of browser for help system (rj)
+16.07.
+      * Added FluidSynth fix for ignoring preset selection of soundfonts that don't exist (ml)
+      * fix midi import of pitch bend events (ws)
+      * fix pitch bend handling (ws)
+      * enlarge PitchLabel width so that 14 bit controller values can be
+        displayed without clipping (ws)
+15.07.
+      * removed some debug messages  (ws)
+12.07.
+      * show one more measure in pianoroll and drum editor (ws)
+      * renamed controller name "Hold1" to "Sustain" in *idf files (ws)
+11.07.
+      * New try at fixing help browser on all systems (rj)
+10.07.
+      * updated muse.pro and translation sources (share/locacle/*.ts) (ws)
+      * list editor: implemented input mode for program change messages (ws)
+09.07.
+      * fixed "edit - delete track" hangs MusE - bug (ws)
+07.07.
+      * fixed routing for stereo LADSPA plugins used in mono strips (ws)
+      * midi import: first resolve note on/of then transform ticks to internal
+        resolution (ws)
+06.06.
+      * set global automation default to "true", set midi track automation to
+        "read" (ws)
+      * enable auxSend chorusSend and reverbSend in midi mixer strip if
+        corresponding controllers are added (ws)
+      * init automationType for midi tracks (ws)
+      * fixed gm.idf instrument definition file (ws)
+      * implemented "Add New Controller" in list editor / edit controller (ws)
+      * save current midi controller values in *.med file (ws)
+05.05.
+      * updated roland-XP30.idf instrument definition (Sverre H. Huseby)
+04.05.
+      * 0.7.0pre2 tagged (rj)
+03.05.
+      * fixed a cut/glue bug probably introduced at 24.04 (ws)
+      * fixed compilation of musewidgetsplugin.so (ws)
+      * changed splash screen handling, used QTimer instead of background thread (ws)
+02.05.
+      * Added first version of splash screen (rj)
+01.05.
+      * Updated LADCCA support to (almost) usable condition (rj)
+30.04.
+      * Added zoom scaling in drum editor, same as piano roll (rj)
+29.04.
+      * Disabled Random Rhythm Generator (rj)
+      * Took a stab at fixing up shortcuts (rj)
+      * Fixed crash bug when clicking Channel Info and there was no info (rj)
+28.04.
+      * Added single key shortcuts for edit tools (rj)
+      * added shortcut for Marker editor (rj)
+      * and fixed some shortcut inconsistencies (rj)
+27.04.
+      * update marker list on tempo change (ws)
+      * allow adding markers from the ruler with shift-click (rj)
+26.04.
+      * added missing header file(s) (ws)
+25.04.
+      * fixed aux processing: stereo -> mono aux (ws)
+      * metronom now sends proper note off events (ws)
+24.04.
+      * deactivated clip list editor. (ws)
+      * after loading of template, treat current project as "untitled" (ws)
+      * removed data structure "Clip". All information are now in WaveEvent;
+        this simplifies the structure a lot and makes reference counting more
+        reliable. Unfortunatly this also means a new incompatible *.med file
+        version. (ws)
+      * changed reference counting of Event class; simplified and more reliable (ws)
+21.04.
+      * fixed some synchronisation issues between mixer and trackinfo window (ws)
+      * fix update of mixer after removal of aux strip (ws)
+20.04.
+      * Added shortcuts to bug reporting tool, homepage,
+        and updated AboutBox (rj)
+19.04.
+      * fixed QT version check in m4/qt.m4 (ws)
+18.04.
+      * add samplerate initialization to fluidsynth (ws)
+      * compilation fix: added missing include in fluid.cpp (ws)
+17.04.
+      * File->New crashed when current project had selected audio track (ws)
+
+15.04.
+      * 0.7.0pre1 * tagged for prerelease (rj)
+      * arranger: fast repeated pastes now works more reliable (no more stacked
+        parts) (ws)
+      * Thread(): crashed, when poll() returned more than one ready file descriptor
+        and the corresponding callback routine manipulates the list
+        of file descriptors. This happened timing dependend and only in real time
+        mode. (ws)
+      * fixed Fifo() get() (ws)
+      * small extension in soft synth interface (Mess()): added return values
+        for processEvent()
+14.4.
+      * fixed pan range for midi mixer strips
+      * renaming soft synth instances + save/restore should now work
+      * fixed fluid "gui"
+      * changed CTRL_VAL_UNKNONW as it conflicts with valid
+        values for CTRL_PROGRAM (ws)
+13.4.
+      * dont crash on missing LADSPA plugin (ws)
+      * set metronome precount default to "false". Precount is not
+        implemented. (ws)
+      * fixed crash when toggling stereo or pre buttons in mixer (ws)
+      * synchronize channel number in mixer/arranger-tracklist (ws)
+      * changed all float printf("%f") to equivalent qt-string
+        routines; dont localize decimal point so that the
+        strings can be properly parsed; this should fix some
+        save/restore problems in localized MusE versions (ws)
+12.4
+      - arranger/portinfo: fix update of instrument names (ws)
+      - fluid synth: enable drumsets (ws)
+      - fixed crash on inserting meta/ctrl/aftertouch in list
+        editor (ws)
+      - fixed crash in arranger when moving mouse+Alt after
+        removing a track (ws)
+11.4  - fixed initialization of Pan after load of new song (ws)
+      - fixed graphical master track editor (ws)
+      - fixed Qt-Version check (ws)
+      - small qt3.2 compatibility changes (string->toInt() conversion) (ws)
+10.4  - made plugin selector remember the previous selection type (rj)
+4.4   - drag & drop import of wave files (rj)
+      - drag & drop import of mid files (rj)
+3.4   - reactivated vam synthesizer
+      - fixed initialization bug in s1 synthesizer demo code (ws)
+      - added another vertical line in drum editor
+2.4   - integrated new icons (ws)
+      - increased required QT-Version to 3.2 in configure.ac (ws)
+1.4   - added vertikal line in track list as suggested by Joachim Schiele
+      - fixed synchronisation issue between mixer and tracklist (changing midi channel can
+        add/remove mixer strip) (ws)
+      - Changed pan range to -1 +1 (rj)
+      - added new icons from Joachim Schiele (not integrated) (ws)
+      - Support for showing only selected plugins in plugin dialog (rj)
+31.3  - Added various compile fixes needed by debian (rj)
+29.3  - Updated mc303 instrument file from Conrad Berh�ster (rj)
+25.3  - bugfix for pos increase/decrease shortcut (ml)
+24.3  - bugfix for mtscale redraw area when window is scrolled left
+      - bugfix for arranger shortcuts (ml)
+23.3  - added position seek to drumeditor + arranger.
+      - increase/decrease pitch of selected notes in drumeditor with ctrl+up/down
+      - added quantize shortcut keys (1-8) in drumeditor (ml)
+21.3  - added shortcut for pitch increase and decrease of sel notes, in pianoroll (Ctrl+Up/Down)
+      - moved shortcut handling for pianoroll + drumeditor to EventCanvas
+      - leftmost note selected when opening proll/drumeditor (ml)
+16.3  - added shortcut for iterative quantize in p-roll. added shortcuts for
+        selection of notes in p-roll and drumeditor: left/right arrows moves
+        selection, holding down shift adds to current selection (ml)
+      - bugfix, moved blocking of signals on startup to exclude loading of project since
+        a bunch of widgets didn't get updated (ml)
+12.3  - bugfix for menu initialization of "add track"-menu shortcuts (ml)
+      - added some regular 7-bit controllers to Fluidsynth (ml)
+6.3   - Fluidsynti chorus operational again, controlled by NRPNs and
+        automatic gui-update here too. (ml)
+      - Fluidsynti reverb restored. Reverb is now controlled by NRPNs.
+        Automatic updates of gui when controller-changes occur. Unloading
+        of soundfonts restored. (ml)
+4.3   - Fluidsynti playback restored. Gain restored. (ml)
+3.3   - Fluidsynti major rewrite, not fully functioning though (ml)
+      - fixed crash on reload song with open mixer
+      - fixed crash on saving *.med: dont save aux values for channels
+        which have no aux send (like aux strips)
+      - remove empty record wav files on MusE exit
+      - fixed crash on undo controller editing (ws)
+28.2  - more icons from Joachim Schiele (ws)
+      - fixed crash with mouse wheel events in arranger track list
+      - fixed some routing related crashes
+25.2  - show mixer strip in trackinfo window for audio tracks (ws)
+24.2  - compatibility patch to read midi tracks from old 1.0 *.med
+        files (ws)
+      - implemented quick input routing from jack (ws)
+      - added some new icons form Joachim Schiele (ws)
+23.2  - implemented quick output routing to jack; some routing
+        fixes (ws)
+22.2  - added instrument map for yamaha PSR 530 keyboard from
+        Lalit Chhabra (ml)
+      - misc compilation fixes from Joost Yervante (ws)
+21.2  - added drum map for Yamaha DX200 from Joost Yervante Damad (ws)
+      - "quick routing" buttons in mixer (ws)
+17.2  - install musewidgetsplugin.so in PREFIX/lib/muse/qtplugins/designer
+        and add this path to qt library path in application (ws)
+16.2  - trackinfo geometry management changes (ws)
+14.2  - added volume controller to organ, so that the organ
+        synthesizer volume can be controlled in the mixer midi strip (ws)
+13.2
+      - optimized "organ" software synthesizer: precomputed frequency
+        tables, integer envelope generator based on bresenham algorithm;
+        added "velocity" switch; (ws)
+      - changed VAM synthesizer for new interface (ws)
+
+12.2  - controller movements in software synthesizer gui's are now
+        send as midi events to MusE and can be recorded/replayed/edited
+        (currently only working for "organ" synti) (ws)
+      - changed software synth interface (again) (ws)
+
+11.2 - expanded trackInfo by default (rj)
+     - added some graphics to trackInfo :) (rj)
+     - changed "White" to "Default" (still white though) (rj)
+     - fixed trackInfo updating for tracks without their own trackInfo (rj)
+     - added lousy fix to update trackInfo when a track is deleted.
+       it's lousy because it's updating the trackInfo even though the
+       removed track wasn't highlighted, can place you in a tight spot
+       at times. I added it anyway because it removes a crash problem.
+       a better fix would be preferable. (rj)
+     - fixed mouse wheel functionality on knobs and sliders in mixer. (rj)
+
+8.2  - propagate track name changes to mixer (ws)
+     - enforce unique track name when user renames tracks (ws)
+     - implement one to many audio routing (ws)
+     - fixed bug in route dialog refresh after inserting new strip (ws)
+     - fixed aux send volume (ws)
+
+4.2  - added missing activate() to LADSPA plugin initialisation.
+      This fixes crashes with some plugins (plugins who use activate()
+      to allocate memory) (ws)
+      -fixed user definable LADSPA guis using QT-designer; added another
+       example *.ui file for "Toms'Audio Plugins" TAP-Reverberator (ws)
+1.2
+      - logarithmic values were initially wrong for spin boxes in
+        LADSPA guis (ws)
+      - On-the-fly-change of shortcuts in Listeditor, Drumeditor. Added selection
+      shortcuts to Drumeditor (ML)
+      - Added on-the-fly-change for shortcuts in pianoroll (connected to
+      configChanged-signal) (ML)
+
+30.1  save geometry of LADSPA plugin guis;
+      fixed missing mixer refresh after adding an auxSend strip (ws)
+29.1  mixer strip automation types OFF, READ, WRITE and TOUCH
+      implemented; automated controller so far: volume, pan (ws)
+27.1  more code for automation;
+      better reference counting for audio Clip; Clips with zero
+      reference are not saved in *.med file anymore (ws)
+26.1  - removed obsolete driver/midirawin* (ws)
+25.1  - removed obsolete raw midi devices & serial midi; all devices
+        are now handled by ALSA (ws)
+24.1  - changed "Configure" to "Settings"; changed "Display" to "View"
+        for better standard compliance (ws)
+23.1  - enabled controller editing in midi list editor (ws)
+19.1  - added new dir/lib libsynti to collect common code
+        for all software synthesizer (ws)
+18.1  - ported VAM software synthesizer to new MESS interface
+        (not complete) (ws)
+      - events send from synth gui are not echoed back anymore
+17.1  - drumedit: changed "keyFilter" to "drumInstrument"; use
+        it to handle drum instrument specific NRPN controllers (as defined
+        in XG standard (ws)
+      - move drum instrument select status from drumMap to drum editor.
+        This allows for independent selections in different drum
+        editors. (ws)
+      - extend midi controller definitions in *.idf files for
+        drum instrument specific NRPN controllers (controller number
+        contains pitch value) (ws)
+
+16.1  - Added small fix to editctrlbase.ui to make it compile (RJ)
+      - Updated various revision info in README (RJ)
+
+15.1  - Corrected appearance of buttons in Metronome window (FN)
+
+9.1
+      - "record" button in midi ChannelInfo; pressing this button
+        inserts changes in hbank/lbank/program/pan/volume as
+        controller events into song
+      - pianoroll editor: new "multi select mode": If more than one
+        event is selected, the event info spinboxes are set to zero.
+        Entered Values are interpreted as offsets and added to all
+        selected events.
+      - some fixes and performance enhancements to "MidiTransformator" (ws)
+      - fixed saving of drum tracks (ws)
+8.1
+      - changed arranger shortcuts + shortcut-configurator to use configChanged; all arranger menu shortcuts
+      redefinable on-the-fly. most menu options configurable (ML)
+      - now possible to toggle mixer window (ML)
+      - changed Ctrl+A in arranger to be used for select all instead of "Save As" for the sake of uniformity (ML)
+5.1
+      - new config (Config->GlobalSettings) option:
+            - start with empty song
+            - start with last song
+            - start with configured init song
+2.1
+      - smf type 0 export (ws)
+31.12
+      - midi export; fixes to midi controller handling (ws)
+30.12
+         - added dynamic shortcuts for all menu options in the arranger (will hopefully
+         work fine when config is loaded before menus are built) (ML)
+         - added check and prevention of conflicting shortcut sequences inside
+         respective categories, global shortcuts and misc "reserved"
+         shortcuts (ML)
+         - capture dialog grabs/releases keyboard (ML)
+26.12
+      - faster update of mixer (ws)
+22.12
+      - added dummy audio driver; this permits running MusE
+        without suid root and without RT priority when started
+        with "-d" option; this is for debugging & to get
+        normal core dumps (ws)
+20.12
+      - Reverb + chorus grayout-problem in fluidsynthgui removed. Some QT-designer files changed to 3.2 (ML)
+      - More shortcut updates: Added a dialog for capturing shortcuts (ML)
+18.12 (ws)
+      - "declicked" s1 demo synthesizer
+      - make organ controller values persistent
+      - fixed integer overflow in organ synti controller values
+17.12 (ws)
+      - new: mouse wheel events for track list values
+      - track colors in tracklist configurable in "appearance settings"
+      - more configuration options in "appearance settings"
+        part colors are now configurable
+      - ~/.MusE now contains only configuration data; this
+        settings are not replicated in *.med files any more
+10.12
+      - more shortcut stuff in the dummy shortcut config window (ML)
+      - new "load song" option: load all/load song data only (omit config data) (ws)
+      - new "File" function: load template; this function initializes current
+            song with another song (template)
+      - new option while importing a midi file: replace/add to project
+9.12
+      - More shurtcut stuff + dummy config dialog (ML)
+2.12
+      - Bugfixes in pianoroll for insert at current location and seek before
+        beginning of song (ML)
+      - fixed crash on "New" or loading new project
+(ws)  - "bounce to track" now works "faster than realtime" with JACK
+        freewheel mode (JACK 0.91.0 cvs required)
+      - mixer automation for gain & pan; some basic functions
+      - preparation for adding imported midifile to current project
+1.12
+      - More shortcut preparations (ML)
+27.11
+      - Added mouse wheel handling for knobs and sliders
+        shift modifier available for extreme slow motion. (RJ)
+25.11
+      - drummapping for recorded events (not heard on record playback echo yet) (ML)
+      - misc updates& fixes for track handling (ws)
+      - removed activity column in tracklist; will be replaced by
+        mixer meter display (ws)
+      - midi record flag can be set again, enabling midi recording
+24.11
+      - Added first steps for uniform handling of shortcuts (ML)
+23.11
+      - some mixer updates(ws)
+22.11
+      - fixed software synth handling; looping is only possible
+        on segment boundaries (ws)
+20.11
+      - Bugfix for drummaps and keyfilter in drumeditor (ML)
+      - apply drum map when importing midi (ws)
+      - retain track ordering across save/load (ws)
+      - wave files in the project directory are stored with
+        relative path, all others now with absolute path (ws)
+16.11
+      - Map outputted drumnotes according to drumMap index (Mathias Lundgren)
+
+14.11.  (ws)
+      - JACK transport interface implemented
+      - finally removed ALSA driver; JACK now required;
+      - default to RT-mode on start (-R option is removed); -d (debug)
+        starts without RT
+
+12.11.  (ws):
+        - removed midi mixer; first code to integrate midi mixer
+          into audio mixer; mixer moved to pulldown menu "Display"
+        - mixer strips are handled like tracks in arranger (prepare
+          for automation)
+        - track type cannot changed anymore in arranger track list;
+          also removed double click creation of tracks which makes
+          no sense anymore
+        - integrated "atomic" patches from Daniel Kobras
+09.11.  - audio routing fixes; mono/stereo switching for input/output
+          strips should now work; audio recording to tracks (ws)
+08.11.  - aux send audio mixer strips (ws)
+        - Arrowing up and down update in arranger (Mathias Lundgren)
+07.11.  - Fluidsynth compile problem w. Debian/qt/stl/gcc fixed (Mathias Lundgren)
+        - "Double undo"-bug fixed in Pianoroll (Mathias Lundgren)
+04.11.  - many changes to audio mixer and audio routing; implement
+          framework for new audio features (ws)
+31.10.
+      - museProject set correctly when loading song on startup (RJ)
+      - save dialog added when adding first wave track (RJ)
+      - load/save of wave files handled with relative paths (to project) (RJ)
+      - Updated swedish translation (Robert Jonsson)
+      - Merged softsynth and midiconfig dialogs as in old tree(Robert Jonsson)
+      - Some museProject issues(Robert Jonsson)
+      - updated new midi controller implementation (ws)
+
+29.10. (ws)
+      - update soft synthesizer organ/fluid/fluidsynth; extent MESS
+        interface
+      - update from 0.6.2 (Mathias Lundgren):
+         - Various drumeditor-related updates including: Horizontal splitter
+           offset stored. Fixed length command added (Alt+L). Bugfix for selection
+           of events inside/outside locators. Initialization of drummap doesn't overwrite
+           entries loaded from project file.
+         - Alt+P sets locators to selected notes in PianoRoll and DrumEditor
+         - CTRL+Leftclick on an item in the Arranger, PianoRoll or DrumEditor selects all
+           parts/notes on the same track/same pitch
+         - Pressing Enter in the Arranger now opens the appropriate editor for the
+           part (Mathias Lundgren)
+         - The midithread now maps keys on a drumtrack according to the drummap.
+         - Cursor up/down (Mathias Lundgren)
+         - currently selected drum (Mathias Lundgren)
+      - fixed compilation error in givertcap.c (andrew)
+      - removed iiwu soft synth temporarily from compilation until
+        ported to new "mess" interface
+      - added missing file ltmain.sh
+      - create new cvs at sourceforge.net
+-------------
+      - removed obsolete score editor
+      - changed midi controller handling
+      - new process structure
+      - redesign of "mess" software synthesizer; removed alsa
+      - new midifile import/export
+      - fork from cvs; new file structure
+0.6.2(omuse):
+      - added first version of (incomplete) french translation from
+      - removed stk based soft synthesizer + share/rawwaves
+      - removed sound font
+      - fixed bug in midi recording when recording starts with a note off;
+        also the recorded part len was miscomputed when the recording ends with
+        a pressed key (missing note off event)
+      - added new allocator for SEventList and MPEventList (memory.cpp, memory.h)
+        to make sure the midi RT-thread does not call malloc/new/free/delete
+      - added misc build patches from Daniel Kobras
+      - make selection of alsa audio device an command line argument
+        (-A xxx   default: hw:0)
+      - fixed "edit->select->allInLoop"
+      - fixed track height after renaming track
+0.6.1:
+      - fixed "Cakewalk Style" display in arranger
+      - added russian translation from Alexandre Prokoudinek
+      - arranger: tracks are now independent vertical resizable
+      - arranger: implement part rename from popup menu
+      - arranger: show part name in parts in addition to events
+      - audio mixer: interpret min slider position as "off"
+      - audio mixer: added value entry for pan (Robert Jonsson)
+      - audio: some routing fixes
+      - audio mixer: enable data entry for slider label
+      - ladspa plugin gui: replaced value label with data entry
+        to allow numerical entry of parameter values
+      - pianoroll: added undo/redo to edit menu + accel. keys
+      - ctrl editor: implemented changing (painting) of pitch
+        events
+      - added macros for big endian machines in midi.h
+      - added spain translation (Albert Gonzales)
+0.6.0:
+      - added swedish translations (Robert Jonsson)
+      - fixed editing of pitch events in list editor
+      - fixed crash in score editor
+      - check tempo entry values; dont allow invalid values which could
+        crash MusE
+      - fixed not functioning "Abort" button in MidiTransform dialog
+      - fixed Ctrl-editing in drum editor
+      - fixed "Group" audio routing
+      - fixed editing of pitch values in parts not beginning at tick zero
+      - fixed "unexpected EOF" after dragging of events in midieditor
+      - fixed cut&paste in midieditor
+      - implemented deleting multiple selected parts in arranger with Del key
+      - fixed audio pan pots in mono->stereo conversion
+      - changed iiwu to fluidsynth (thanks to Helio Chissini de Castro)
+      - new popupmenu: click with right button in empty tracklist
+      - LADSPA plugin guis are generated at runtime from qt-designer *.ui
+        (xml-)files; testfile is "freeverb.ui" for freeverb plugin;
+      - added "Slider"+"DoubleLabel" to musewidgetsplugin to make widgets
+        available in QT-Designer
+      - renamed poseditplugin.so to musewidgetsplugin.so
+      - fixed midi ctrl editor
+      - sparate sync device into txSyncDevice and rxSyncDevice. RxSyncDevice
+        can be configured to "all".
+      - use <asm/atomic.h> macros for atomically inc/dec count in lockfree
+        Fifo implementation
+0.6.0pre8:
+      - prepared for internationalization:
+        - created muse.pro
+        - removed all implicit type conversions char* -> QString
+        - added several missing translations  tr()
+      - Part text is now colored depending on background (FN)
+      - fixed "bounce to file" fifo handling
+      - disable transport buttons in slave mode
+      - calculate correct size for new part after midi recording
+      - fixed crash when reloading song while audio mixer is open
+      - implemented "bypass" function for LADSPA plugin gui's
+      - changed obsolete qt header file names
+      - implemented external midi instrument definition files (*.idf)
+        (examples are in */share/muse/instruments)
+      - implemented moving plugins up/down in effect rack
+      - fixed: renaming wave track switched track to mono
+      - implemented LADSPA "LOGARYTHMIC" and "INT" hints
+      - disable record button for tracks with no input routed to
+      - implemented LADSPA "TOGGLED" port as QCheckBox in plugin gui
+      - changed algorithm for zeroing denormalized floats in freeverb
+        plugin; now it works again for gcc3.x and optimization flags
+        turned on
+0.6.0pre7:
+      - prevent creation of empty wave files when switching the
+        record button in audio mixer on/off; wave files are only
+        preserved when you actually record something into it
+      - made plugin guis persistent
+      - fixed scissor operation on wave parts
+      - added missing code for "bounce to file"
+      - fixed "bounce to track"
+      - removed/changed obsolete qt code
+      - update for current iiwu cvs
+      - fixed initialisation bug in wave editor
+      - dont link iiwu libs static
+      - (bh) added ladcca support
+      - fixed midifile export
+      - arranger, pianoroll editor, drum editor: tool popup menu
+        with right mouse button click
+      - update iiwu to current cvs version
+      - implement trackinfo patch names for iiwu
+      - fixed "appearance settings"
+      - added keyboard shortcut "Del" to delete events in pianoroll
+        and drum editor
+      - "Asterisk" key in keypad now toggles record mode
+0.6.0pre6:
+      - fixed len of new created event in pianoroll editor
+      - extend font selection in "apearance settings"
+      - Added shortcuts for "Select All", "Unselect All" and "Invert
+        Selection" in PianoRoll editor (FN)
+      - Fixed Event coloring and shortcut ("e") key (FN)
+0.6.0pre5:
+      - fixed midi seek & tempo map
+      - implemented global tempo change
+0.6.0pre4:
+      - fixed tempo handling
+      - pianoroll editor/drum editor: fixed changing of note position
+      - transport: some geometry/font changes; time signature can now
+        be changed by mouse wheel
+      - fixed glue/scissor tool
+      - catch sigchld signal again so we know when a softsynth gui exits
+
+0.6.0pre3
+      - fixed drawing of drum parts in drum editor
+      - on reading *.med files reject events which dont't fit into part (more robust
+        handling of defective med files)
+      - remove also synth gui when removing synth
+      - implemented some of Frank Neumann's usability suggestions:
+            - a "Copy Part" sets the current location marker after the marked part
+            - "Del" removes part if a part is selected instead of whole track
+            - new Keyboard Accelerator "C" toggles metronome click
+            - removed channel info for selected notes in pianoroll editor and
+              drum editor
+            - navigate between parts with left/right buttons in arranger window
+      - implemented changing note position for selected note in "note info" toolbar
+      - fixed: changing "loop" flag in transport window does not change "loop" flag in
+        other windows
+      - call pcm_wait() in alsa driver with sane values
+      - fixed: after load song seq did not run with rtc
+      - filenames for audio recording to tracks are now generated
+        automatically; every recording goes into separate file
+      - (bh) updated build system to use automake 1.7
+      - fixe Midi->DefineController "Cancel"
+      - new function: Midi->DefineController load+replace and load+merge
+      - fixed MFile write: close() was missing; this fixes a.o. saving of
+        midi controller sets
+      - make organ synth aware of project directory for saving presets
+      - fixed load/restore presets for LADSPA plugins
+      - changed organ default values for envelope generator
+      - more fixes for alsa driver (less xrun errors)
+      - lokal allokator for soft syth midi events implemented
+      - enable sample rates != 44100 for iiwu (JACK has 48000 default)
+      - cleanup soft synth instantiation: call alsaScanMidiPorts only one time
+      - small audio buffer handling optimizations
+      - some thread cleanups
+      - fixed audio mixer geometry handling
+      - another fix for RT thread handling in iiwu
+      - fixed recording of pitch events (not tested)
+      - load iiwu sound fonts in a background helper thread to
+        avoid being thrown out by JACK
+      - fixed RT thread handling; now muse+iiwu+jack works
+      - honour LADSPA default hints for controller ports
+      - removed some restrictions for LADSPA plugins
+      - fixed tempo entry in transport window
+      - added high priority watchdog process to avoid system freezes
+      - updated "iiwu" synth to use peter hanappes libiiwusynth
+        iiwu now remembers last used sound font
+      - fixed cut&paste for midi parts
+      - fixed cut function for midi parts
+0.6.0pre2:
+      - audio mixer: reset meter on mute
+      - changed input routing to allow monitoring while recording
+      - removed superfluous second init() call for soft syntis
+      - fixes for mono/stereo conversion
+      - ensure all wave files are properly closed on exit
+      - fixed segfault on second cliplist open
+      - fixed wave part split function
+      - fixed ALSA/JACK configuration bug
+      - event time positions are again stored as absolute time positions
+        to enhance compatibility with older "*.med" files
+      - changed panic button: instead of sending lots of note off
+        events only "all sound off" controller events are send for all
+        ports/channels
+      - fixed error on importing midi files when there are more
+        than one track assigned to a midi channel
+      - found another memory corruption bug in sysex handling
+      - fixed precount in metronome
+      - space key again stops play/record
+      - fixed stop/play in transport window
+      - prohibit change of mono/stereo for input strip
+      - convert mono/stereo on the fly for wave parts
+      - fixed crash when pressing play in empty song
+      - audio loop fixed
+      - _midiThruFlag not always initialized
+
+0.6.0pre1:
+      - attached midi mixer again
+      - fixed metronome: loop mode, measure/beat configurable
+      - moved part colorisation into part popup menu
+      - added global midi pitch shifter in addition to track pitch shift; this
+        allows for simple pitch transforming the whole song. Drum tracks are not
+        pitch shifted.
+      - fixed fatal error in soft synth handling resulting in sporadic
+        core dumps
+      - removed sf directory (sound file stuff) and replaced
+        it with the real thing: libsndfile 1.0.0
+      - removed bogus kde stuff: kde.h onlyqt.h desk.h
+      - JACK Audio support
+      - AUDIO & ALSA now required
+      - fixed memory corruption with sysex events
+      - simplified organ soft synth parameter handling
+      - removed illegal controller message optimizations
+      - implementation of "panic" button
+      - first instantiated synti did'nt show up in port list
+      - size of resized drum and pianoroll editor windows are now remembered
+      - fixed crash when configuring null audio device
+      - removing soft synth instance did not stop midi thread; alsa client
+        was not removed
+      - (bh) lots of buid system changes and general cleanups
+      - (bh) removed the use of the UICBASES make variable; .ui files can
+        now be added straight into _SOURCES make variables with the new
+        SUFFIXES support in automake 1.6
+      - (bh) upped minimum automake version to 1.6
+      - (bh) removed the use of the MOCBASES make variable; header files that
+        need to be run through moc are now detected automatically
+      - (bh) new iiwusynth softsynth
+      - (bh) removed support for oss and alsa 0.5
+      - clone parts implemented (also called "alias parts" or "ghost parts")
+        (dragging part with Alt-Key pressed in opposit to Shift Key which
+        produces a normal copy);
+        needed many internal changes; hope not to much is broken
+      - mastertrack: new spin widget for changing midi signature
+      - fixed midi thread initialization after loading new file
+      - stopped sequencer before loading new file; this should fix occational
+        core dumps on New/Load/ImportMidi
+      - some cleanups with file load/save operations
+      - Config->MidiPorts->otherRaw (device name pulldown): enabled OpenFile
+        Button for DevicePath field: At least current Qt can now handle devices.
+      - implemented:
+            - structure pulldown menu:
+              - global split
+              - global cut (mastertrack cut not implem.)
+              - global insert (without m.t.)
+      - implemented part mute
+      - added pitch transposition to pianoroll widget keyboard (Tim Westbrock)
+      - Save(As) behavior patch from Tim Westbrock
+0.5.3:
+      - updated stk library to version 4.0; adapted stk synthesizer
+      - added SECURITY advice from J�n Nettingsmeier
+      - several compilation & portability fixes from Takashi Iwai
+      - fixed keyboard entry in pianoroll editor
+      - midi now runs synchronous with audio
+      - midi record time stamps now again synchronous to play position
+      - fixed trackinfo geometry (hopefully)
+      - pianoroll: fixed endless loop if record was pressed
+        without any mididevices configured (reported by Ola Andersson)
+      - default to english help if help for $LANG not available
+        (Ola Andersson)
+      - detect misconfigured ALSA system (Ola Andersson)
+      - updated demo app "rasen.med" to current xml format
+0.5.2:
+      - fixed: rtc clock resolution settings in Config->GlobalSettings
+      - fixed: crash on second start of Edit->Marker
+      - more consequent implementation of -a (no audio) command
+        line parameter: no softsynth and LADSPA plugin loading;
+        disable audio menu
+      - fixed sending spurious midi controller settings on startup
+        when track info is active
+      - first code for "random rhythm generator" port from JAZZ++
+      - fixed start offset of midi recording
+      - pianoroll editor: fixed selection update
+      - appearance setting "font size" now persistent
+      - does not crash anymore if no ALSA system found. (ALSA is still
+        needed to compile MusE)
+      - fixed: multiple recordings: clear events form first recording
+        in record buffer
+      - fixed: crash when removing last track with open
+        trackinfo
+      - (bh) added beginnings of alsa midi patchbay
+      - changed suid handling: now MusE runs with normal user uid
+        and switches only to root uid for some special operations
+      - fixed mixdown file output
+      - fixed lock on startup when wave file was missing
+      - arranger: open tracktype pulldown with left mouse click
+        (was opened on right click)
+      - arranger: don't scale pixmap symbols
+      - added share/rawwaves to cvs repository (needed by stk synthi)
+      - changed software synthesizer interface "mess": moved more
+        common synth functionality to "mess.c"; changed synti's to new
+        interface
+      - removed obsolete "short name" in controller type dialog
+      - CtrlCanvas: always draw location marker on top of grid
+      - fixed: TrackInfo: velocity
+      - fixed: alsa midi: "pitch change" interpreted as "channel aftertouch"
+      - fixed some midi controller bugs
+      - implemented new parameter save/restore interface for soft
+        synthesizer (applied to "organ")
+      - (ws) fixed lost controller events on midi import
+      - (ws) fixed crash when removing soft synth in use
+      - (ws) appearanceSettings: changing font size now works better
+      - (Bob) files now include "config.h" instead of relying on -DALSA,
+        -DALSACVS, -DINSTDIR and -DAUDIO
+      - (Bob) Added 'delete preset' button to vam's gui and made it
+        remember what preset file it loaded
+      - Mess: added new class MessMono() which implements some
+        monophone synthesizer features. This is used in the
+        simple demo synthi s1
+      - if you try to exit MusE and abort this process, MusE was
+        left in an unusable state
+      - loop end was not calculated correct; event at loop end
+        was played
+      - muse now again stops at end of song in play mode
+0.5.1:
+      - fixed crash: SaveConfig after Config->SoftSynth->AddSoftSynth
+      - changed default audioSegmentSize from 256 to 512
+      - eliminated message: "input type 66 not handled"
+      - SoftSynth gui was startet with uid root
+      - save project: warn if file open fails
+      - removed trace message "unrecognized event 42" (Sensing Midi Event
+        from external keyboard). Anyway MusE does not handle midi sensing
+        events.
+      - changed geometry for trackInfo panel
+      - more code for 14 bit controller events
+      - install "rawwaves" for stk synti into right place preventing
+        crash on start
+      - fixed another crash when load soft synth configuration
+      - fixed Midi Position Label (was -1 beat/measure off)
+      - fixed problem with lost note off events
+      - generate "note on" events with velocity zero instead of
+        "note off" events
+0.5.0:
+      - pianoroll editor: caption is changed when current part
+        changes
+      - new software synthesizer adapted from:
+         STK: A ToolKit of Audio Synthesis Classes and Instruments in C++
+         Version 3.2
+         By Perry R. Cook, 1995-2000
+         and Gary P. Scavone, 1997-2000.
+         http://www-ccrma.stanford.edu/software/stk/
+      - added presets to "Organ" software synthesizer
+      - changed midi routing for software synthesizer:
+           - controller changes from gui can be recorded
+      - new midi thread implementation
+      - speaker button in pianoroll editor implemented:
+        if on events are played if clicked
+      - new Menu: Midi->InputPlugins
+        - demo plugin "Transpose"
+        - moved Config->MidiRemote to Midi->InputPlugins
+        - moved Config->MidiInputFilter to Midi->InputPlugins
+        - moved Config->MidiInputTransform to Midi->InputPlugins
+      - as usual some bug fixes of old and new bugs
+      - master editor: fixed: locator bars sometimes invisible
+      - master editor: new tempo spin box to change tempo at current
+        position
+0.4.16:
+      - new software synthesizer adapted:
+        "Organ - Additive Organ Synthesizer Voice" from David A. Bartold
+      - new simple demo Synthesizer S1
+      - remove the hardcoded qt path "/usr/qt3" (0.4.15)
+      - fixed many bugs
+      - new: implemented line draw tool in controller editor
+0.4.15:
+      - qt3.0 now required
+      - many gui/widget changes
+      - fixed segfault when pasting wave parts
+      - changed (again) default magnification in wave-view
+      - implemented prefetch thread for playing audio files
+      - fixed: iiwu did not play with ALSA 0.6
+      - fixed: handle audio underruns for ALSA 0.6
+0.4.14:
+      - some makefile and compilation changes
+      - audio play: noise between audioparts during playback
+      - dont stop at end of song when "loop" is active
+      - default magnification in wave-view set to 1
+      - fixed a audio route initialization bug
+      - new metronome configuration: precount configuration added
+0.4.13:
+      - avoid "disconnect error" on startup
+      - wave view: y magnification now persistent
+      - small gui enhancements to reduce flicker
+      - make install: now creates gui dir
+      - implemented 8 bit wave input format
+      - fixed another source of audio crashes
+0.4.12:
+      - audio play: mixing buffer was only partly cleared resulting
+        in random noise
+      - fixed: core after removing soft synth instance
+      - set default master volume to 1
+      - fixed some audio routing bugs
+      - drumedit: added missing display update after drum map loading
+      - drumedit: fixed:  when loading external drum map, velocity values
+         got zero
+      - drumedit: fixed: core some time after loading external drum map
+0.4.11:
+      - iiwu: in GM-mode dontt allow drum channel program changes;
+              also ignore bank select messages
+              - set GM-Mode resets synth
+              - some changes in drum channel handling
+      - substantial changes in audio implementation
+      - reimplemented audio configuration
+      - miditransform: val2 transforms fixed
+0.4.10:
+      - iiwu: implemented sustain, ctrl:expression
+      - iiwu: changed sync audio/midi; this fixes some timing issues
+      - iiwu: fixed: core when loading new sound font while playing
+      - split RT thread into separate midi & audio thread
+      - fixed some bugs: crash on midi recording
+      - some new functions in pianoroll editor
+      - added/integrated Tommi Ilmonens "givertcap"
+      - iiwu: some fixes for ALSA 0.9beta
+      - arranger: voice name popup in channel info works again
+0.4.9:
+      - fixed some memory leaks
+      - before loading a new song all synthesizer instances are
+        now removed
+      - reorganized installation:
+            - there is a toplevel installation directory
+              (default /usr/muse); the environment variable MUSE
+              points to this directory
+            - architecture dependent files go into
+              $(MUSE)/lib, architecture independent files
+              into $(MUSE)/share
+      - MidiSync: MC ticks are now also send in stop mode
+        (if configured)
+        - after "Start" is send, sequencer starts on next
+          midi clock tick
+      - iiwu: fixed core dump on save if no soundfont loaded
+      - iiwu: high resolution buffer size independent midi event
+              processing
+0.4.8:
+      - faster display updates
+      - some changes for better compatibility with different
+        environments (compiler, lib)
+      - fixes for ALSA 0.5.11
+      - fixed core dump while removing soft synth instance
+      - fixed some bugs with iiwu+gui
+      - fixed: TransportWindow: tempochanges while masterflag is off
+      - fixed: all tempochanges are now saved in songfile
+0.4.7:
+      - ALSA 0.5.11 compiles again
+      - MESSS gui interface, first try:
+            -every midi instrument can have an associated
+             GUI (currently only impl. for MESSS soft synths).
+             The GUI is startet as a separate process connected
+             to the midi instrument. The gui sends midi commands
+             (sysex) to stdout. This midi data stream is connected
+             to the midi instrument port.
+            - test implem. can load sound fonts into iiwu synthi
+      - fixed a bug in loading big sound fonts
+      - waveedit: waveform display works again
+      - some iiwu changes
+0.4.6:
+      - completed midi input architecture: every midi track has now
+        assigned input port+channel. Channel can be 1-16 or "all".
+        This allows for routing of different midi channels to
+        different tracks while recording.
+      - changed max number of midi ports from 8 to 16
+      - fixed serveral bugs iiwu software synthesizer
+      - fixed compilation problems with some ALSA versions
+      - fixed: changing track name changed record flag
+      - fixed: remove midi editor if associated track is removed
+      - fixed: initial state of solo button in arranger
+      - fixed: hard to reproduce core while deleting track
+      - new command line option to set real time priority
+      - max number of midi ports is now 16
+      - audio recording from master to file now works:
+            - configure Audio->MixdownFile (only wave/16bit)
+            - switch on record button in audio mixer master strip
+            - play
+      - fixed: graphic master editor: missing display refresh
+        after signature change
+      - changed midiThruFlag: removed from Config->MidiPorts;
+        "midi thru" now is associated with a track, if set all input
+        to that track is echoet to track port/channel
+
+0.4.5:
+      MESSS: (MusE Experimental Software Synthesizer interface Spec):
+        A software synthesizer is implemented as a dynamic
+        loadable library (*.so file) with two interfaces to the
+        outside world:
+
+            - a LADSPA interface for audio output
+            - a midi sequencer interface registered to ALSA
+
+      MusE searches all available synths and presents a list
+      in Config->SoftSynthesizer. To use a synthesizer you have
+      to create an instance. Several instances of an synt can be
+      created and used. Every instance creates
+
+        a) an alsa midi sequencer port (look at Config->MidiPorts)
+        b) a new strip in the audio mixer
+
+      As a demo i ported a stripped down version of the iiwu
+      software synthesizer (http://www.iiwu.org) to MusE.
+      Setup info is in README.softsynth
+
+0.4.4:
+      - fixed cakewalk style event display in arranger
+      - track comments are handled as 0xf text meta events in
+        midi files
+      - fixed: follow song in pianoroll/drumedit (daniel mack)
+      - fixed: refresh in list editor
+      - implemented 14 Bit controller in list editor
+      - new patch form Takashi Iwai enables MusE to compile
+        with ALSA 0.9.0beta5 and current cvs version
+
+0.4.3:
+      - new: Config->MidiInputTransform
+      - new: comments for tracks: click with right button on track
+             name in arrange window
+      - fixed: score editor sometimes eats up all memory on start;
+            machine was unusable for some minutes until muse crashes
+      - fixed some other smaller bugs
+      - patch from Takashi Iwai for latest (cvs-) ALSA
+      - fixed: score postscript generation (printer & preview output)
+
+0.4.2:
+      - added few missing display updates (bugs introduced
+        with 0.4.1 drawing optimizations)
+      - pianoroll editor:
+        - fixed: edit->DeleteEvents
+      - drum editor:
+        - implemented: edit->DeleteEvents
+      - use different cursor shapes while using
+        Glue- Cut- and Rubber tools
+0.4.1:
+      - some small Changes for compiling MusE with gcc 3.0
+      - track info values (transposition, velocity etc)
+        are now applied when exporting to midi file
+      - better geometry management for ctrl panel
+      - pianoroll editor / drum editor now allow for more than
+        one ctrl panel
+      - new: load/save midi controller sets
+      - automatic creation of midi controller sets on
+        midi import
+      - new: active(used) midi controllers for current
+        parts in editor window are now marked in controller list
+      - fixed: parts in open editors are not restored correctly
+      - many drawing optimizations; scrolling is now much
+        faster/smoother
+0.4.0:
+      - input configurable for every track
+        (you can record from more than one midi input device
+        to different tracks)
+      - you have to switch on the "record enable" flag for
+        every track you want to record to
+      - Note "h" is now called "b" unless you set
+        the environment variable "LANGUAGE" to "de"
+      - Changes from Daniel Mack:
+        - bigtime window now shows hour:minute:sec:frame
+        - configurable snap grid for arranger
+        - configurable font size
+        - again "tick underflow"
+
+0.3.20:
+      - "bigtime" widget from Daniel Mack
+      - fixed global accelerator keys f11/f12 (toggle transport &
+        bigtime window)
+      - fixed: score editor: try placing notes in the right margin of the
+        last row gave core dump
+      - score editor: different cursor shapes
+      - new try on missing midi sync ticks (producing "tick underflow"
+        trace messages)
+      - score editor: some small enhancements
+0.3.19:
+      - several small bugfixes from Daniel Mack
+      - fixed "make install"
+      - if you have trouble compiling ALSA audio:
+        change "AUDIO = yes"  to "AUDIO = no" in make.inc
+      - some fixes/enhancements from Brian K:
+        - fixed: score editor: no more "EVENT not found" during subsequent
+          edits of a selected note
+        - scrubbing with rubber tool in score editor
+        - new part appearance option
+0.3.18:
+      - fixed: Export Midifile
+0.3.17:
+      - simple audio recording
+      - midi sync slave: received "start" did not reset pos to tick 0
+      - fixed several bugs in screen update and synchronisation between
+        different midi editors
+      - new: Configure->Appearance dialog from Daniel Mack
+0.3.16:
+      - "follow song" now works in both directions
+      - MidiTransformator: implemented missing "Copy" and "Extract" functions
+      - fixed: reset sustain at stop only for channels which really had sustain
+        set
+      - fixed several bugs in midi sync code; needs more testing
+      - received "set song position" from alsa midi driver now
+        handled in sync slave mode
+      - transport buttons are now disabled in "external midi
+        sync" mode
+      - fixed: do not send midi "start" "stop" "continue" etc. as sync slave
+      - fixed: several small bugs i cannot remember
+0.3.15:
+      - fixed: some typos in "MidiTransformator"
+      - fixed: core at end of midi recording from external
+        sequencer as sync slave
+      - replaced midi "continue" message with "start"
+        when running as midi sync master
+        known bug: midi clock output only if seq plays,
+              should be send always even if seq stops
+        not implemented: cannot change tempo as sync slave
+
+0.3.14:
+      - fixed: core: typo in "undo add track"
+      - fixed: core: "undo remove event"
+      - selection of events is now a global attribute: if you select
+          an event in an editor, the same event is selected in all
+          open editors
+      - new: Midi Transformator (look at edit->MidiTransform)
+        (not all operators and operations are implemented yet)
+0.3.13:
+      - fixed: TimeScale was wrong when using signature changes
+      - fixed: enforce left marker <= right marker
+      - new: mono wave tracks
+      - more usable LADSPA plugins to play with
+      - several small changes/bug fixes
+0.3.12:
+      - fixed: synchronisation of tempo/signature changes with sequencer rt-thread
+      - fixed: track parameter were added again and again in loop mode
+      - new: tempo/signature changes undo/redo
+      - new: midi "transpose" function from Daniel Mack
+        (Arranger: edit->midi->transpose)
+0.3.11:
+      - fixed: fixed serious bug in wave file handling
+      - simple audio play with ALSA 0.9.x
+      - fixed: editing events -> core (introduced in 0.3.10)
+0.3.10:
+      - fixed: core while deleting controller events
+      - new: extended configuration of raw (serial) midi interfaces
+      - fixed: some memory leaks
+      - changed for ALSA 0.9.0 beta2
+0.3.9:
+      - some smaller fixes
+      - fixed: core: missing MidiController() Initialization
+      - fixed: pressing another mouse button while "drawing" an event
+        in a canvas with left mouse button pressed gives core
+0.3.8:
+      - fixed: correct update of midi port table on song change
+      - CtrlEditor: controllers can(must) now be configured
+      - List Editor: corrected handling of meta/sysex strings
+      - changed: combined pitch high/low to single value ranging
+        from -8192 +8191; editable with controller editor
+      - ALSA 0.9.0beta1 works for midi; as far as i tested it, this
+        alsa version has no more problems with OSS raw midi emulation
+      - new: colored activity display in arranger (Daniel Mack)
+      - new: context sensitive extensions to "right mouse click
+        pulldown menues" for arranger parts (Daniel Mack)
+      - new: gui prototypes for extendend configuration of raw midi
+        devices and audio mixdown file selection
+      - fixed: quirks with OSS midi devices configuration
+0.3.7:
+      - start porting to ALSA 0.6.0 cvs version
+      - fixed: option -M produces midi output trace for alsa midi
+      - fixed: pianoroll and drum editor now accept input focus
+        and then honour some keyboard shortcuts
+      - fixed: score editor: core when inserting small rests
+      - new: "ruler" for pianoroll, drum editor and part editor
+      - fixed: midi recording: event len always 1 tick (bug introduced
+        in 0.3.6)
+      - midi port config: show only available raw midi devices
+      - fixed: tempomap/tempo  save/restore
+      - fixed: initialize master button to saved value
+      - some smaller changes:
+            - midi recording: new parts begin at record start instead
+              of first event
+            - missing note offs are insertet virtually at record end
+            - recording takes place on selected track - selected part
+              and not on selected part if on different track
+0.3.6:
+      - fixed: markerList: click in list -> core
+      - fixed: stop at end of song only if not recording
+      - fixed: events of zero length crash the sequencer
+      - fixed: missing note off events for metronome
+      - fixed: gui: changing port/channel in trackinfo updates tracklist
+      - new: midi recording & loop
+0.3.5:
+      - fixed: midi recording with alsa was broken
+      - fixed: mastertrack: -> core
+      - fixed: rename track -> rename part -> core
+      - fixed: help browser: back function
+      - fixed: score: entered lyrics are saved again
+      - fixed: score->staffSettings: tracklist
+      - fixed: score->enterNotes wrong snap position
+0.3.4:
+      - fixed: some bugs & quirks
+      - new: implemented pianoroll->edit->deleteEvents
+
+0.3.3:
+      - new: MusE now stops at end of song if in PLAY mode
+      - fixed: core if muse was started without song name and
+        there was no ".musePrj" file in current directory
+      - new: on popular request: "RewindToStart" button
+      - fixed: changing devices while playing
+      - fixed: arranger: could not scroll to the end of song
+      - fixed: song lenght on midi import
+      - fixed: fatal error in handling "note off" events
+      - new: "sustain" is reset on stop
+
+0.3.2:
+      - fixed: part editing: endo delete, glue etc.
+      - fixed: option -m (trace midi input) works again
+      - fixed: midi input filter: could not toggle channel 1 button
+      - fixed: midi mixer
+      - fixed: midi recording into part: part length adjusted if events
+        recorded past end of part
+      - fixed: MusE initialisation failed if there is no ".musePrj"
+        file in current directory!
+
+0.3.1:
+      - step 2 of internal reorganization
+      - fixed: score: lyrics are now saved again
+      - fixed: some quirks with lost track markers
+      - new: Option -L locks sequencer memory
+      - fixed: recording from serial midi (raw oss & korg tohost)
+      - fixed: several smaller bugs & quirks
+
+0.3.0:
+      - fixed: pianoroll editor: entering new events -> core
+      - new: drum editor click on instrument name "plays"
+             instrument
+      - fixed: changing the channel of a track now changes also
+            the channel of all events in that track
+      - massive changes for audio/wave integration:
+        - start of audio mixer
+        - audio routing
+
+0.2.12:
+      - fixed: wave files/tracks/parts: calculation of tick<->time;
+            it should be possible again to import/play simple waves
+      - fixed: funny things happend when muting all audio tracks
+      - fixed: core if no active record track
+      - new: Rob Naccarato started with documentation; press
+            <F1> in MusE and have a look
+
+0.2.11:
+      - fixed: metronome
+      - fixed: initial state of "click" transport button
+      - fixed: midi thru:
+            if midi thru is switched on, all received events are
+            echoed to the port/channel associated to the currently
+            selected track, regardless of the input port/channel.
+            Track parameters as pitch shift, velocity compression etc.
+            are applied before echoing the event.
+      - _not_ fixed: alsa midi driver: strange sysex behaviour
+0.2.10:
+      - fixed: parameter change in midi trackinfo
+      - fixed: some errors in *.med file handling
+      - fixed: midi export
+      - fixed: midi events are now played according to priority:
+            - channel priority:  10,1,2,3,4,5,6,7,8,9,11,12,13,14,15,16
+            - note off before note on
+0.2.9:
+      - fixed: typo in seq.c destroyed timing of 0.2.8
+      - fixed: importing audio files
+      - fixed: writing *med files
+      - fixed: wave form display in arranger
+      - fixed: core on click in arranger "no track area " with pencil tool
+0.2.8:
+      - fixed: oss midi devices now work agin
+      - reorganized midi event dispatcher
+      - fixed: pitchbend for midialsa (Xavier)
+0.2.7:
+      - midi driver reorganization in preparation
+        for better ALSA sequencer integration; soundcard synth
+        work again
+      - some fixes
+0.2.6:
+      DrumEditor overhaul:
+      - fixed: reading drum maps
+      - changed: exporting drum maps now writes the whole map
+      - fixed: device popup: ...invalid menu item
+      - new: instruments can now be moved
+      - fixed: changing A-Note/E-Note did not show effect
+      - changed: small x-offset in event canvas allows better placement of
+        events at pos 1.1.0
+      - new: instrument names can be edited (double click instrument name)
+      - new: some drum maps
+      - fixed: update() missing after selection change in canvas
+      - fixed: len of new inserted drum events was quant-value, should be
+        default len from drum map
+      Alsa Midi Driver:
+      - changed (soundcard synth does not work :-( )
+0.2.5:
+      - fixed: session management for list editor
+      - new: list editor: hex entry in meta event dialog
+      - fixed: Midi: "GS Reset" button aktually did a "GM Reset"
+      - fixed: Midi: "GS Reset" on Song Start was always combined with "GM Reset"
+      - fixed: Arranger: copy/paste produced core
+      - fixed: Arranger: removed some (not working) key accelerators
+      - new: Drag file from KDE fm and Drop on arranger partlist
+      - removed bogus midi archiv
+      - some major code reorganizations in preparation for audio integration
+        resulting in new errors and *.med file incompatibilities;
+      - fixed: "cannot delete busy part" even if part is not busy
+      - fixed: arranger/progname.c: bad instrument name table caused segfault
+        (Tim Mann)
+      - fixed: score/layout.c: could not enter A# (Gilles Fillipini)
+0.2.4:
+      - fixed: removed silly warning: Cannot find translation...
+              (translations are not (yet) enabled)
+      - fixed: trackMarker->destroy TrackMarker->create track -> core
+      - new: integration of track markers in arranger
+          - export/import SMF-Marker as Meta Type 6
+      - changed: src/makefiles new arranged
+      - fixed: score editor: too many rests
+      - fixed: core if you try to insert note outside of staves
+0.2.3:
+      - MidiSyncConfig: extSync synchronized with button in transport
+        window
+      - audio: try oss audio device /dev/dsp in addition to /dev/sound/dsp
+      - changed: column expand logic in arranger tracklist
+      - new: KDE2.2: define HAVE_KDE in make.inc to compile a
+        KDE version of MusE (experimental)
+      - new: realtime recording of Midi SysEx Events
+      - changed: better LADSPA plugin handling
+      - fixed: Pianoroll: Color Events: RGB parameter out of range
+      - changed: canvas: moving objects
+      - fixed: AudioMasterMixer produced core after second invocation
+      - new: track markers
+0.2.2:
+      - switched to QT2.2
+      - fixed: Transport: "Master" button initialization
+      - fixed: session management for partlist in midi editors;
+               (new *.med xml files are probably incompatible
+      - fixed: cut&paste now works for parts on drum tracks
+      - fixed: cannot delete busy Parts any more
+      - fixed: honour LADSPA_PATH environment variable
+      - fixed: TransportWindow stays on top and is manageable
+               (testet with KDE2 beta4)
+      - fixed: arranger: column order is now recorded in
+            .med file
+      - fixed: sometimes under obscure circumstances MusE crashed
+            while opening an midi editor
+      - fixed: several typos/errors in *.med file reading/writing
+      - new: list editor: insert midi events (incl. sysex & meta)
+            double click on list entry to open editor to modify
+            values
+      - new: MTC/MMC Slave:
+               Configured as slave you can synchronize MusE
+               from external devices using Midi Time Code.
+             Midi Clock Master:
+               Configured as master MusE can control external
+               sequencers
+             Hooks for MTC/MMC Master and MidiClock slave.
+      - fixed: score: ScoreConfig::setTracklist() missing "clear"
+      - new: score: odd rest values implemented
+0.2.1:
+      - new: Arranger: move (midi) parts between applications:
+            - cut/copy part(s) to global clipboard
+            - paste part(s) from global clipboard to arranger
+            - drag parts with middle mouse button (experimental)
+      - new: Pianoroll: move events between applications:
+            - cut/copy events to global clipboard
+            - paste events from global clipboard to arranger
+            - drag events with middle mouse button
+      - fixed: only write audio if there are audio tracks
+      - fixed: PianorollEditor: moving multiple selected events
+            (thanks to Chris Wakelin)
+      - fixed: commented out unused/missing "color.xpm"
+      - fixed: partlist changed to multimap<>
+0.2.0:
+      - fixed: another error in OSS midi driver which results in
+        "bad file descriptor" aborts
+      - fixed: MidiFilter - RecordFilter/ThruFilter
+      - new: Master Part of Audio Mixer:
+            - Audio Level Meter
+            - LADSPA Host with
+              - automatic generated user interface
+              - presets store/load
+      - new: LADSPA "Freeverb" plugin for audio master
+      - new: Drum Editor
+            - load/save drum maps
+            - drawing reorganized
+      - new: Pianoroll Editor Functions:
+            - configurable event colors (none/pitch/velocity)
+            - configurable function ranges (apply functions to
+              all/loop/marked events)
+            - selection functions (all/none/loop/invert)
+            - switch between different parts in editor ("ghost events")
+            - PencilTool: Control+LeftMouseButton prevents
+              accidental creation of events
+            - PointerTool: Control+LeftMouseButton restricts
+              to horizontal or vertical move
+0.1.10:
+      - new: MidiExport: some configurable Parameter for exported
+            Standard Midi File (SMF)
+      - new: configurable Midi Record/Thru Filter for midi
+            realtime recording
+      - fixed: time signature changes in score editor
+      - fixed: "midi bar scale" is updated on time signature
+            changes
+      - fixed: event sorting in "list mastertrack editor"
+0.1.9:
+      - fixed: tempo changes during play
+      - fixed: "follow event" in graphical mastertrack editor
+      - fixed: mastertrack list: dynamic content update if song changed
+      - fixed: OSS midi serial output was broken
+0.1.8:
+      - bug: scaling in graphical mastertrack editor
+      - bug: reduce value of MAX_TICK to prevent overflow in scaling
+      - bug: pianoroll editor: length quantization
+      - bug: midi import: timing broken; bug introduced in 0.1.6
+      - feature: editing of time signature in graphical mastertrack
+0.1.7:
+      - bug: typo for 't'-kb accelerator in pianoroll-editor
+      - bug: quant values < 1/64 are not supported-> assertion bug
+        for keyboard accelerator >=8 in pianoroll editor
+      - pianoroll: new feature: step recording - midi input:
+            - press "shift"+ midiKey to enter chords
+              (if you enter same note again, it's deleted)
+            - press "ctrl" + midiKey to continue last note
+      - pianoroll: new menu function: quantize pos+len
+      - quantize configuration dialog: added flag for default len quantization
+                                       "whats this" help text
+0.1.6:
+      - bug: exported midifiles had random "division" timing parameter
+      - bug: core dump on midi record start
+      - feature: keyboard accelerators in pianoroll editor:
+            '1'-'9' '.' and 't' set quant & snap values
+
+0.1.5:
+      - MusE now works again without RTC (Real Time Clock) Device
+        (but much reduced timing accuracy)
+      - new Debug Options -m -M: MidiDump for input and output
+      - global keyboard accelerators:
+        spacebar: while play/record: STOP
+                  while stop:  Goto left mark
+                  while on left mark: Goto Pos 0
+        Enter:    start play
+        Insert:   Stop
+        "/":      Cycle on/off
+        "*":      Record on
+      - Midi Step Recording: implemented external midi keyboard as
+        recording source (new "midi input" toggle button in pianoroll editor)
+0.1.4:
+      Audio
+      ==============
+      - simple audio play (ALSA & OSS)
+      - stubs for cliplist Editor, audio recording
+      - AudioMixer master volume
+      - bug fixes for wave viewer
+
+      Synthesizer
+      ==============
+      - first part of framework for realtime software synthesizer
+        driver/synthis, s1/*;
+
+0.1.3:
+      Score Editor:
+      ==============
+      - print preview button (gv)
+      - postscript default resolution is 72dpi and not 75dpi
+      - configurable overall scale for printer output
+      - simple beams
+
+      Misc:
+      ==============
+      - bug: path handling for project file: project files are now
+          saved in the correct directory
+      - bug: canvas initial scaling
+      - bug: core if configured device didnt exists
+      - bug: ctrl editor produced values > 127
+      - feature: Arranger: Parts are now displayed with a horizontal offset
+      - feature: Arranger: added save/restore for some configuration values
+      - feature: Midi Recording: track parameter like Transposition are now
+        applied before loop through
+      - feature: "Thru" flag in Configure->MidiDevices now implemented
+      - feature: Midi Remote Control: control sequencer stop/play/record/rewind
+        with configurable note events
+      - bug: typo in score/layout.c:split() caused core
+
+0.1.2:
+      - Score:
+        - add lyrics entry
+        - changed note head for 4/4
+        - changed positioning of 2/4 and 4/4 notes
+        - ties can now span systems
+        - tie connected notes are selected as one note
+        - page settings, margins handling corrected
+        - configurable fonts for score editor page layout
+0.1.1:
+      - master: scale changed
+      - no more core when selecting the score editor without a selected
+        part to edit
+      - time signature scale in master track
+      - master track: function tempo edit
+      - new popup menu in arranger / part canvas
+      - makefile: "make depend" target
+      - new: alsa raw midi interface
+      - improved score editor:
+          - split system (piano left&right hand)
+          - multi stave systems
+          - symbols
+          - lasso selection
+          - dynamics symbol palette
+      - window position of all toplevel windows is now remembered
+        correctly
+      - bug fixes & code cleanups
+
+0.0.10:
+      - removed obsolete file.c file.h
+      - separated midi archive
+      - removed unused widgets/wtscale.*
+      - removed unused widgets/dial.*
+      - midis with Meta Event Type 6 produced core
+      - removed '\n' chars from windows caption
+      - new setBg(QColor) method for class View
+      - broken Ctrl-Editor fixed
+      - Pencil Cursor now shown for Pencil Tool in Ctrl-Editor
+      - Mute Indicator changed to red dot
+      - added CtrlEditor to DrumEditor
+      - process session info in xml songfile
+      - more work on mastertrack
+      - start ScoreEditor and moving the mouse on canvas (producing
+          mouseMoveEvents) before exposure of QLineEdit (time & pitch
+          in toolbar) produced core on QLineEdit->setText(xx)
+      - in continuous scroll mode position marker updated correctly
+0.0.9:
+      - xml like configuration and song file
+      - new midi mixer, shows only active midi channels
+      - bug: metronom configuration: channel&port numbers
+      - bug fixes
+0.0.8:
+      - new: quantize function
+      - new: wave tracks: new classes: WaveFile Clip;
+            load wave file; expand song file structure
+            first try on wave editor;
+      - logarithmic magnify
+      - rework of View & Canvas Classes, resulting in much
+        faster scrolling
+0.0.7:
+      - fatal error: use of uninitialized device
+0.0.6:
+      - more diagnostics in file functions
+      - new: can load and save *.gz and *.bz2 files
+      - new function: send local off to instruments
+      - bug fixes in pianoroll step recording
+      - bug fix: "follow song" save and restore
+      - bug fix: in importing midi files: calculating parts
+      - bug fix: metronome -> core
+      - new configuration options for parts
+
+0.0.5:
+      - new: midi activity display in tracklist
+      - new: patch selector in channel info; shows midi instrument
+             categories
+      - new: insert & delete Controller Values in Ctrl-Editor
+      - some minor bugs corrected
+      - nasty bug in Song::nextEvents(), which prevents simple
+        midi songs played correctly
+
+0.0.4:
+      - implemented: forward & rewind buttons
+      - implemented: drum edit: change values in info bar
+      - error: arranger->tracklist: resize failed if columns are swapped
+      - enhanced file selector for background image selection
+      - more WhatsThis and ToolTip Help
+      - Backport to QT202: Filedialog: Filterlists dont work
+      -                    Midi Config: changed signal click() to rightButtonClick()
+      - missing initialisation in song constructor
+      - new subdirectory for controller editor
+      - controller editor for some values
+0.0.3:
+      - new transport design
+      - redesign of TrackInfo and ChannelInfo
+      - some changes reg. fonts and geometry management
+      - misc toolbars changed to read qt toolbars
+0.0.2:
+      - changed color for cpos to red
+      - dont play metronome clicks with time < current
+      - doubleclick on arranger trackname: entrywidget now gets
+        input focus
+      - midi device configuration: reworked
+      - removed endless loop in Song::nextEvents()
+      - ported to qt-2.1.0-snapshot-20000113
+        - changed QPushButton to QToolButton
+      - some cosmetic changes in transport window
+
+0.0.1
+      - first release
+