diff options
Diffstat (limited to 'usbdrv/usbdrv.c')
| -rw-r--r-- | usbdrv/usbdrv.c | 628 |
1 files changed, 628 insertions, 0 deletions
diff --git a/usbdrv/usbdrv.c b/usbdrv/usbdrv.c new file mode 100644 index 0000000..d838935 --- /dev/null +++ b/usbdrv/usbdrv.c @@ -0,0 +1,628 @@ +/* Name: usbdrv.c + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2004-12-29 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + */ + +#include "usbdrv.h" +#include "oddebug.h" + +/* +General Description: +This module implements the C-part of the USB driver. See usbdrv.h for a +documentation of the entire driver. +*/ + +/* ------------------------------------------------------------------------- */ + +/* raw USB registers / interface to assembler code: */ +uchar usbRxBuf[2*USB_BUFSIZE]; /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */ +uchar usbInputBufOffset; /* offset in usbRxBuf used for low level receiving */ +uchar usbDeviceAddr; /* assigned during enumeration, defaults to 0 */ +uchar usbNewDeviceAddr; /* device ID which should be set after status phase */ +uchar usbConfiguration; /* currently selected configuration. Administered by driver, but not used */ +volatile schar usbRxLen; /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */ +uchar usbCurrentTok; /* last token received or endpoint number for last OUT token if != 0 */ +uchar usbRxToken; /* token for data we received; or endpont number for last OUT */ +volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */ +uchar usbTxBuf[USB_BUFSIZE];/* data to transmit with next IN, free if usbTxLen contains handshake token */ +#if USB_COUNT_SOF +volatile uchar usbSofCount; /* incremented by assembler module every SOF */ +#endif +#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE +usbTxStatus_t usbTxStatus1; +# if USB_CFG_HAVE_INTRIN_ENDPOINT3 +usbTxStatus_t usbTxStatus3; +# endif +#endif +#if USB_CFG_CHECK_DATA_TOGGLING +uchar usbCurrentDataToken;/* when we check data toggling to ignore duplicate packets */ +#endif + +/* USB status registers / not shared with asm code */ +usbMsgPtr_t usbMsgPtr; /* data to transmit next -- ROM or RAM address */ +static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */ +static uchar usbMsgFlags; /* flag values see below */ + +#define USB_FLG_MSGPTR_IS_ROM (1<<6) +#define USB_FLG_USE_USER_RW (1<<7) + +/* +optimizing hints: +- do not post/pre inc/dec integer values in operations +- assign value of USB_READ_FLASH() to register variables and don't use side effects in arg +- use narrow scope for variables which should be in X/Y/Z register +- assign char sized expressions to variables to force 8 bit arithmetics +*/ + +/* -------------------------- String Descriptors --------------------------- */ + +#if USB_CFG_DESCR_PROPS_STRINGS == 0 + +#if USB_CFG_DESCR_PROPS_STRING_0 == 0 +#undef USB_CFG_DESCR_PROPS_STRING_0 +#define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0) +PROGMEM const char usbDescriptorString0[] = { /* language descriptor */ + 4, /* sizeof(usbDescriptorString0): length of descriptor in bytes */ + 3, /* descriptor type */ + 0x09, 0x04, /* language index (0x0409 = US-English) */ +}; +#endif + +#if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN +#undef USB_CFG_DESCR_PROPS_STRING_VENDOR +#define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor) +PROGMEM const int usbDescriptorStringVendor[] = { + USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN), + USB_CFG_VENDOR_NAME +}; +#endif + +#if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN +#undef USB_CFG_DESCR_PROPS_STRING_PRODUCT +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice) +PROGMEM const int usbDescriptorStringDevice[] = { + USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN), + USB_CFG_DEVICE_NAME +}; +#endif + +#if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN +#undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber) +PROGMEM const int usbDescriptorStringSerialNumber[] = { + USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN), + USB_CFG_SERIAL_NUMBER +}; +#endif + +#endif /* USB_CFG_DESCR_PROPS_STRINGS == 0 */ + +/* --------------------------- Device Descriptor --------------------------- */ + +#if USB_CFG_DESCR_PROPS_DEVICE == 0 +#undef USB_CFG_DESCR_PROPS_DEVICE +#define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice) +PROGMEM const char usbDescriptorDevice[] = { /* USB device descriptor */ + 18, /* sizeof(usbDescriptorDevice): length of descriptor in bytes */ + USBDESCR_DEVICE, /* descriptor type */ + 0x10, 0x01, /* USB version supported */ + USB_CFG_DEVICE_CLASS, + USB_CFG_DEVICE_SUBCLASS, + 0, /* protocol */ + 8, /* max packet size */ + /* the following two casts affect the first byte of the constant only, but + * that's sufficient to avoid a warning with the default values. + */ + (char)USB_CFG_VENDOR_ID,/* 2 bytes */ + (char)USB_CFG_DEVICE_ID,/* 2 bytes */ + USB_CFG_DEVICE_VERSION, /* 2 bytes */ + USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0, /* manufacturer string index */ + USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0, /* product string index */ + USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0, /* serial number string index */ + 1, /* number of configurations */ +}; +#endif + +/* ----------------------- Configuration Descriptor ------------------------ */ + +#if USB_CFG_DESCR_PROPS_HID_REPORT != 0 && USB_CFG_DESCR_PROPS_HID == 0 +#undef USB_CFG_DESCR_PROPS_HID +#define USB_CFG_DESCR_PROPS_HID 9 /* length of HID descriptor in config descriptor below */ +#endif + +#if USB_CFG_DESCR_PROPS_CONFIGURATION == 0 +#undef USB_CFG_DESCR_PROPS_CONFIGURATION +#define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration) +PROGMEM const char usbDescriptorConfiguration[] = { /* USB configuration descriptor */ + 9, /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */ + USBDESCR_CONFIG, /* descriptor type */ + 18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 + + (USB_CFG_DESCR_PROPS_HID & 0xff), 0, + /* total length of data returned (including inlined descriptors) */ + 1, /* number of interfaces in this configuration */ + 1, /* index of this configuration */ + 0, /* configuration name string index */ +#if USB_CFG_IS_SELF_POWERED + (1 << 7) | USBATTR_SELFPOWER, /* attributes */ +#else + (1 << 7), /* attributes */ +#endif + USB_CFG_MAX_BUS_POWER/2, /* max USB current in 2mA units */ +/* interface descriptor follows inline: */ + 9, /* sizeof(usbDescrInterface): length of descriptor in bytes */ + USBDESCR_INTERFACE, /* descriptor type */ + 0, /* index of this interface */ + 0, /* alternate setting for this interface */ + USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3, /* endpoints excl 0: number of endpoint descriptors to follow */ + USB_CFG_INTERFACE_CLASS, + USB_CFG_INTERFACE_SUBCLASS, + USB_CFG_INTERFACE_PROTOCOL, + 0, /* string index for interface */ +#if (USB_CFG_DESCR_PROPS_HID & 0xff) /* HID descriptor */ + 9, /* sizeof(usbDescrHID): length of descriptor in bytes */ + USBDESCR_HID, /* descriptor type: HID */ + 0x01, 0x01, /* BCD representation of HID version */ + 0x00, /* target country code */ + 0x01, /* number of HID Report (or other HID class) Descriptor infos to follow */ + 0x22, /* descriptor type: report */ + USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0, /* total length of report descriptor */ +#endif +#if USB_CFG_HAVE_INTRIN_ENDPOINT /* endpoint descriptor for endpoint 1 */ + 7, /* sizeof(usbDescrEndpoint) */ + USBDESCR_ENDPOINT, /* descriptor type = endpoint */ + (char)0x81, /* IN endpoint number 1 */ + 0x03, /* attrib: Interrupt endpoint */ + 8, 0, /* maximum packet size */ + USB_CFG_INTR_POLL_INTERVAL, /* in ms */ +#endif +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 /* endpoint descriptor for endpoint 3 */ + 7, /* sizeof(usbDescrEndpoint) */ + USBDESCR_ENDPOINT, /* descriptor type = endpoint */ + (char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */ + 0x03, /* attrib: Interrupt endpoint */ + 8, 0, /* maximum packet size */ + USB_CFG_INTR_POLL_INTERVAL, /* in ms */ +#endif +}; +#endif + +/* ------------------------------------------------------------------------- */ + +static inline void usbResetDataToggling(void) +{ +#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE + USB_SET_DATATOKEN1(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */ +# if USB_CFG_HAVE_INTRIN_ENDPOINT3 + USB_SET_DATATOKEN3(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */ +# endif +#endif +} + +static inline void usbResetStall(void) +{ +#if USB_CFG_IMPLEMENT_HALT && USB_CFG_HAVE_INTRIN_ENDPOINT + usbTxLen1 = USBPID_NAK; +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 + usbTxLen3 = USBPID_NAK; +#endif +#endif +} + +/* ------------------------------------------------------------------------- */ + +#if !USB_CFG_SUPPRESS_INTR_CODE +#if USB_CFG_HAVE_INTRIN_ENDPOINT +static void usbGenericSetInterrupt(uchar *data, uchar len, usbTxStatus_t *txStatus) +{ +uchar *p; +char i; + +#if USB_CFG_IMPLEMENT_HALT + if(usbTxLen1 == USBPID_STALL) + return; +#endif + if(txStatus->len & 0x10){ /* packet buffer was empty */ + txStatus->buffer[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* toggle token */ + }else{ + txStatus->len = USBPID_NAK; /* avoid sending outdated (overwritten) interrupt data */ + } + p = txStatus->buffer + 1; + i = len; + do{ /* if len == 0, we still copy 1 byte, but that's no problem */ + *p++ = *data++; + }while(--i > 0); /* loop control at the end is 2 bytes shorter than at beginning */ + usbCrc16Append(&txStatus->buffer[1], len); + txStatus->len = len + 4; /* len must be given including sync byte */ + DBG2(0x21 + (((int)txStatus >> 3) & 3), txStatus->buffer, len + 3); +} + +USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len) +{ + usbGenericSetInterrupt(data, len, &usbTxStatus1); +} +#endif + +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 +USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len) +{ + usbGenericSetInterrupt(data, len, &usbTxStatus3); +} +#endif +#endif /* USB_CFG_SUPPRESS_INTR_CODE */ + +/* ------------------ utilities for code following below ------------------- */ + +/* Use defines for the switch statement so that we can choose between an + * if()else if() and a switch/case based implementation. switch() is more + * efficient for a LARGE set of sequential choices, if() is better in all other + * cases. + */ +#if USB_CFG_USE_SWITCH_STATEMENT +# define SWITCH_START(cmd) switch(cmd){{ +# define SWITCH_CASE(value) }break; case (value):{ +# define SWITCH_CASE2(v1,v2) }break; case (v1): case(v2):{ +# define SWITCH_CASE3(v1,v2,v3) }break; case (v1): case(v2): case(v3):{ +# define SWITCH_DEFAULT }break; default:{ +# define SWITCH_END }} +#else +# define SWITCH_START(cmd) {uchar _cmd = cmd; if(0){ +# define SWITCH_CASE(value) }else if(_cmd == (value)){ +# define SWITCH_CASE2(v1,v2) }else if(_cmd == (v1) || _cmd == (v2)){ +# define SWITCH_CASE3(v1,v2,v3) }else if(_cmd == (v1) || _cmd == (v2) || (_cmd == v3)){ +# define SWITCH_DEFAULT }else{ +# define SWITCH_END }} +#endif + +#ifndef USB_RX_USER_HOOK +#define USB_RX_USER_HOOK(data, len) +#endif +#ifndef USB_SET_ADDRESS_HOOK +#define USB_SET_ADDRESS_HOOK() +#endif + +/* ------------------------------------------------------------------------- */ + +/* We use if() instead of #if in the macro below because #if can't be used + * in macros and the compiler optimizes constant conditions anyway. + * This may cause problems with undefined symbols if compiled without + * optimizing! + */ +#define GET_DESCRIPTOR(cfgProp, staticName) \ + if(cfgProp){ \ + if((cfgProp) & USB_PROP_IS_RAM) \ + flags = 0; \ + if((cfgProp) & USB_PROP_IS_DYNAMIC){ \ + len = usbFunctionDescriptor(rq); \ + }else{ \ + len = USB_PROP_LENGTH(cfgProp); \ + usbMsgPtr = (usbMsgPtr_t)(staticName); \ + } \ + } + +/* usbDriverDescriptor() is similar to usbFunctionDescriptor(), but used + * internally for all types of descriptors. + */ +static inline usbMsgLen_t usbDriverDescriptor(usbRequest_t *rq) +{ +usbMsgLen_t len = 0; +uchar flags = USB_FLG_MSGPTR_IS_ROM; + + SWITCH_START(rq->wValue.bytes[1]) + SWITCH_CASE(USBDESCR_DEVICE) /* 1 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_DEVICE, usbDescriptorDevice) + SWITCH_CASE(USBDESCR_CONFIG) /* 2 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_CONFIGURATION, usbDescriptorConfiguration) + SWITCH_CASE(USBDESCR_STRING) /* 3 */ +#if USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC + if(USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_RAM) + flags = 0; + len = usbFunctionDescriptor(rq); +#else /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */ + SWITCH_START(rq->wValue.bytes[0]) + SWITCH_CASE(0) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_0, usbDescriptorString0) + SWITCH_CASE(1) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_VENDOR, usbDescriptorStringVendor) + SWITCH_CASE(2) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_PRODUCT, usbDescriptorStringDevice) + SWITCH_CASE(3) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER, usbDescriptorStringSerialNumber) + SWITCH_DEFAULT + if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){ + len = usbFunctionDescriptor(rq); + } + SWITCH_END +#endif /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */ +#if USB_CFG_DESCR_PROPS_HID_REPORT /* only support HID descriptors if enabled */ + SWITCH_CASE(USBDESCR_HID) /* 0x21 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID, usbDescriptorConfiguration + 18) + SWITCH_CASE(USBDESCR_HID_REPORT)/* 0x22 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID_REPORT, usbDescriptorHidReport) +#endif + SWITCH_DEFAULT + if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){ + len = usbFunctionDescriptor(rq); + } + SWITCH_END + usbMsgFlags = flags; + return len; +} + +/* ------------------------------------------------------------------------- */ + +/* usbDriverSetup() is similar to usbFunctionSetup(), but it's used for + * standard requests instead of class and custom requests. + */ +static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq) +{ +usbMsgLen_t len = 0; +uchar *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */ +uchar value = rq->wValue.bytes[0]; +#if USB_CFG_IMPLEMENT_HALT +uchar index = rq->wIndex.bytes[0]; +#endif + + dataPtr[0] = 0; /* default reply common to USBRQ_GET_STATUS and USBRQ_GET_INTERFACE */ + SWITCH_START(rq->bRequest) + SWITCH_CASE(USBRQ_GET_STATUS) /* 0 */ + uchar recipient = rq->bmRequestType & USBRQ_RCPT_MASK; /* assign arith ops to variables to enforce byte size */ + if(USB_CFG_IS_SELF_POWERED && recipient == USBRQ_RCPT_DEVICE) + dataPtr[0] = USB_CFG_IS_SELF_POWERED; +#if USB_CFG_IMPLEMENT_HALT + if(recipient == USBRQ_RCPT_ENDPOINT && index == 0x81) /* request status for endpoint 1 */ + dataPtr[0] = usbTxLen1 == USBPID_STALL; +#endif + dataPtr[1] = 0; + len = 2; +#if USB_CFG_IMPLEMENT_HALT + SWITCH_CASE2(USBRQ_CLEAR_FEATURE, USBRQ_SET_FEATURE) /* 1, 3 */ + if(value == 0 && index == 0x81){ /* feature 0 == HALT for endpoint == 1 */ + usbTxLen1 = rq->bRequest == USBRQ_CLEAR_FEATURE ? USBPID_NAK : USBPID_STALL; + usbResetDataToggling(); + } +#endif + SWITCH_CASE(USBRQ_SET_ADDRESS) /* 5 */ + usbNewDeviceAddr = value; + USB_SET_ADDRESS_HOOK(); + SWITCH_CASE(USBRQ_GET_DESCRIPTOR) /* 6 */ + len = usbDriverDescriptor(rq); + goto skipMsgPtrAssignment; + SWITCH_CASE(USBRQ_GET_CONFIGURATION) /* 8 */ + dataPtr = &usbConfiguration; /* send current configuration value */ + len = 1; + SWITCH_CASE(USBRQ_SET_CONFIGURATION) /* 9 */ + usbConfiguration = value; + usbResetStall(); + SWITCH_CASE(USBRQ_GET_INTERFACE) /* 10 */ + len = 1; +#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE + SWITCH_CASE(USBRQ_SET_INTERFACE) /* 11 */ + usbResetDataToggling(); + usbResetStall(); +#endif + SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */ + /* Should we add an optional hook here? */ + SWITCH_END + usbMsgPtr = (usbMsgPtr_t)dataPtr; +skipMsgPtrAssignment: + return len; +} + +/* ------------------------------------------------------------------------- */ + +/* usbProcessRx() is called for every message received by the interrupt + * routine. It distinguishes between SETUP and DATA packets and processes + * them accordingly. + */ +static inline void usbProcessRx(uchar *data, uchar len) +{ +usbRequest_t *rq = (void *)data; + +/* usbRxToken can be: + * 0x2d 00101101 (USBPID_SETUP for setup data) + * 0xe1 11100001 (USBPID_OUT: data phase of setup transfer) + * 0...0x0f for OUT on endpoint X + */ + DBG2(0x10 + (usbRxToken & 0xf), data, len + 2); /* SETUP=1d, SETUP-DATA=11, OUTx=1x */ + USB_RX_USER_HOOK(data, len) +#if USB_CFG_IMPLEMENT_FN_WRITEOUT + if(usbRxToken < 0x10){ /* OUT to endpoint != 0: endpoint number in usbRxToken */ + usbFunctionWriteOut(data, len); + return; + } +#endif + if(usbRxToken == (uchar)USBPID_SETUP){ + if(len != 8) /* Setup size must be always 8 bytes. Ignore otherwise. */ + return; + usbMsgLen_t replyLen; + usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */ + usbTxLen = USBPID_NAK; /* abort pending transmit */ + usbMsgFlags = 0; + uchar type = rq->bmRequestType & USBRQ_TYPE_MASK; + if(type != USBRQ_TYPE_STANDARD){ /* standard requests are handled by driver */ + replyLen = usbFunctionSetup(data); + }else{ + replyLen = usbDriverSetup(rq); + } +#if USB_CFG_IMPLEMENT_FN_READ || USB_CFG_IMPLEMENT_FN_WRITE + if(replyLen == USB_NO_MSG){ /* use user-supplied read/write function */ + /* do some conditioning on replyLen, but on IN transfers only */ + if((rq->bmRequestType & USBRQ_DIR_MASK) != USBRQ_DIR_HOST_TO_DEVICE){ + if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */ + replyLen = rq->wLength.bytes[0]; + }else{ + replyLen = rq->wLength.word; + } + } + usbMsgFlags = USB_FLG_USE_USER_RW; + }else /* The 'else' prevents that we limit a replyLen of USB_NO_MSG to the maximum transfer len. */ +#endif + if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */ + if(!rq->wLength.bytes[1] && replyLen > rq->wLength.bytes[0]) /* limit length to max */ + replyLen = rq->wLength.bytes[0]; + }else{ + if(replyLen > rq->wLength.word) /* limit length to max */ + replyLen = rq->wLength.word; + } + usbMsgLen = replyLen; + }else{ /* usbRxToken must be USBPID_OUT, which means data phase of setup (control-out) */ +#if USB_CFG_IMPLEMENT_FN_WRITE + if(usbMsgFlags & USB_FLG_USE_USER_RW){ + uchar rval = usbFunctionWrite(data, len); + if(rval == 0xff){ /* an error occurred */ + usbTxLen = USBPID_STALL; + }else if(rval != 0){ /* This was the final package */ + usbMsgLen = 0; /* answer with a zero-sized data packet */ + } + } +#endif + } +} + +/* ------------------------------------------------------------------------- */ + +/* This function is similar to usbFunctionRead(), but it's also called for + * data handled automatically by the driver (e.g. descriptor reads). + */ +static uchar usbDeviceRead(uchar *data, uchar len) +{ + if(len > 0){ /* don't bother app with 0 sized reads */ +#if USB_CFG_IMPLEMENT_FN_READ + if(usbMsgFlags & USB_FLG_USE_USER_RW){ + len = usbFunctionRead(data, len); + }else +#endif + { + uchar i = len; + usbMsgPtr_t r = usbMsgPtr; + if(usbMsgFlags & USB_FLG_MSGPTR_IS_ROM){ /* ROM data */ + do{ + uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */ + *data++ = c; + r++; + }while(--i); + }else{ /* RAM data */ + do{ + *data++ = *((uchar *)r); + r++; + }while(--i); + } + usbMsgPtr = r; + } + } + return len; +} + +/* ------------------------------------------------------------------------- */ + +/* usbBuildTxBlock() is called when we have data to transmit and the + * interrupt routine's transmit buffer is empty. + */ +static inline void usbBuildTxBlock(void) +{ +usbMsgLen_t wantLen; +uchar len; + + wantLen = usbMsgLen; + if(wantLen > 8) + wantLen = 8; + usbMsgLen -= wantLen; + usbTxBuf[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* DATA toggling */ + len = usbDeviceRead(usbTxBuf + 1, wantLen); + if(len <= 8){ /* valid data packet */ + usbCrc16Append(&usbTxBuf[1], len); + len += 4; /* length including sync byte */ + if(len < 12) /* a partial package identifies end of message */ + usbMsgLen = USB_NO_MSG; + }else{ + len = USBPID_STALL; /* stall the endpoint */ + usbMsgLen = USB_NO_MSG; + } + usbTxLen = len; + DBG2(0x20, usbTxBuf, len-1); +} + +/* ------------------------------------------------------------------------- */ + +static inline void usbHandleResetHook(uchar notResetState) +{ +#ifdef USB_RESET_HOOK +static uchar wasReset; +uchar isReset = !notResetState; + + if(wasReset != isReset){ + USB_RESET_HOOK(isReset); + wasReset = isReset; + } +#else + notResetState = notResetState; // avoid compiler warning +#endif +} + +/* ------------------------------------------------------------------------- */ + +USB_PUBLIC void usbPoll(void) +{ +schar len; +uchar i; + + len = usbRxLen - 3; + if(len >= 0){ +/* We could check CRC16 here -- but ACK has already been sent anyway. If you + * need data integrity checks with this driver, check the CRC in your app + * code and report errors back to the host. Since the ACK was already sent, + * retries must be handled on application level. + * unsigned crc = usbCrc16(buffer + 1, usbRxLen - 3); + */ + usbProcessRx(usbRxBuf + USB_BUFSIZE + 1 - usbInputBufOffset, len); +#if USB_CFG_HAVE_FLOWCONTROL + if(usbRxLen > 0) /* only mark as available if not inactivated */ + usbRxLen = 0; +#else + usbRxLen = 0; /* mark rx buffer as available */ +#endif + } + if(usbTxLen & 0x10){ /* transmit system idle */ + if(usbMsgLen != USB_NO_MSG){ /* transmit data pending? */ + usbBuildTxBlock(); + } + } + for(i = 20; i > 0; i--){ + uchar usbLineStatus = USBIN & USBMASK; + if(usbLineStatus != 0) /* SE0 has ended */ + goto isNotReset; + } + /* RESET condition, called multiple times during reset */ + usbNewDeviceAddr = 0; + usbDeviceAddr = 0; + usbResetStall(); + DBG1(0xff, 0, 0); +isNotReset: + usbHandleResetHook(i); +} + +/* ------------------------------------------------------------------------- */ + +USB_PUBLIC void usbInit(void) +{ +#if USB_INTR_CFG_SET != 0 + USB_INTR_CFG |= USB_INTR_CFG_SET; +#endif +#if USB_INTR_CFG_CLR != 0 + USB_INTR_CFG &= ~(USB_INTR_CFG_CLR); +#endif + USB_INTR_ENABLE |= (1 << USB_INTR_ENABLE_BIT); + usbResetDataToggling(); +#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE + usbTxLen1 = USBPID_NAK; +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 + usbTxLen3 = USBPID_NAK; +#endif +#endif +} + +/* ------------------------------------------------------------------------- */ |